Varytec Easy Move LED XS User Manual

Summary of Easy Move LED XS

  • Page 1

    User manual.

  • Page 2

    2 / 21 index 1. Safety information ........................................................................................................................... 4 1.1. Hints for safe and faultless use ............................................................................................... 4 2. ...

  • Page 3

    3 / 21 14. Dmx values (spot) 13 channels ............................................................................................... 17 15. Dmx values (wash) 12 channels ............................................................................................. 18 16. Technical data .............

  • Page 4

    4 / 21 1. Safety information • the usage of this device is only allowed for indoor use. • the warranty expires in case of manual changes at the device by the user. • the device may only be repaired by professionals. • only use fuses of the same type as the original and only use original spare parts....

  • Page 5

    5 / 21 attention! The warranty claim expires, when damages are caused by disregarding of this user manual. The manufacturer and importer do not assume liability for consequential damages at all. Only qualified and trained technicians are allowed to work at electric parts of the device. All electrica...

  • Page 6

    6 / 21 2. Introduction 2.1. Controllable features • control with 5 or 10 dmx- channels • 540° pan/270°tilt • rgb color-mixing • gobo-wheel with 9 gobos and goboshake-function • adjustable electronic strobe • adjustable electronic dimmer • adjustable speed for pan/tilt, color-mixing and color-presets...

  • Page 7

    7 / 21 3. Dmx channels 12 channel mode for wash light 13 channel mode for spot channel function channel functon 1 pan 1 pan 2 pan fine 2 pan fine 3 tilt 3 tilt 4 tilt fine 4 tilt fine 5 speed pan/tilt 5 speed pan/tilt 6 dimmer/strobe 6 dimmer/strobe 7 red 7 red 8 green 8 green 9 blue 9 blue 10 color...

  • Page 8

    8 / 21 4. Product overview.

  • Page 9

    9 / 21 5. Technical specifications 5.1. Change internal fuse push the out the fuse-holder with a screwdriver. Change the fuse only with one of the exact same type. Push the fuse-holder back on its origin position and connect the mains cable to the socket again. 5.2. Link devices you need 3-pin dmx c...

  • Page 10

    10 / 21 6. Dmx data cable only use a cable, which is conform to the rs-485 standard. Standard microphone cable cannot transfer dmx signal correct over long distances. The cable should fulfill following requirements: 2 conductors + ground (3-pole) maximum capacity between conductors 30pf/ft. Maximum ...

  • Page 11

    11 / 21 7. Configuration of connection 1. Connect the 3-pole connector of the dmx cable with the 3-pole output of the controller. 2. Connect the female connector of the cable with the input of the first device. 3. Then go on by connecting the output of the device with the input of the next device..

  • Page 12

    12 / 21 8. Master/slave linking the devices 1. Connect the 3-pole connector of the dmx cable with the 3-pole output the first device. 2. Then connect the output of the second device with the input of the third device. 3. Then go on by connecting the output of the each device with each input of the n...

  • Page 13

    13 / 21 10. Operation settings 10.1. Navigate in the control display to adjust the functions, use the 4 buttons below the display..

  • Page 14

    14 / 21 11. Menu overview.

  • Page 15

    15 / 21 12. User adjustments 12.1. Invert pan 1. Press the “mode” button until “pan” or “rpan” appears in the display. 2. Use the “up/down” buttons to select the requested adjustment and then press enter. 12.2. Invert tilt 1. Press the “mode” button until “t il” or “rt il” appears in the display. 2....

  • Page 16

    16 / 21 12.7. Service functions 12.7.1. Device reset 1. Press the “mode” button until “rest” appears in the display. 2. Press enter. 12.7.2. Set to factory default 1. Press the “mode” button until “load” appears in the display. 2. Press enter. 13. Mode of operation 13.1. Stand alone mode (auto mode)...

  • Page 17

    17 / 21 14. Dmx values (spot) 13 channels.

  • Page 18

    18 / 21 15. Dmx values (wash) 12 channels.

  • Page 19

    19 / 21.

  • Page 20

    20 / 21 16. Technical data.

  • Page 21: B & K Braun Gmbh

    21 / 21 importeur: b & k braun gmbh industriestraße 1 d-76307 karlsbad www.Bkbraun.Com info@bkbraun.Com.