1. DL manuals
  2. Varytec
  3. DJ Equipment
  4. LED Pad 144 144x10mm RGBW
  5. User Manual

Varytec LED Pad 144 144x10mm RGBW User Manual

Manual is about: LED PAR

Summary of LED Pad 144 144x10mm RGBW

  • Page 1

    Led pad 144 144×10 mm rgbw led par user manual.

  • Page 2

    Musikhaus thomann thomann gmbh hans-thomann-straße 1 96138 burgebrach germany telephone: +49 (0) 9546 9223-0 e-mail: info@thomann.De internet: www.Thomann.De 17.10.2017, id: 369857.

  • Page 3: Table of Contents

    Table of contents 1 general notes............................................................................................................................................... 6 1.1 further information.....................................................................................................

  • Page 4

    8 technical specifications....................................................................................................................... 35 9 plug and connection assignments.................................................................................................. 36 10 troubleshooti...

  • Page 5

    Led pad 144 144×10 mm rgbw 5 led par.

  • Page 6: General Notes

    1 general notes this manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sur...

  • Page 7

    1.1 further information on our website ( www.Thomann.De) you will find lots of further information and details on the following points: download this manual is also available as pdf file for you to download. Keyword search use the search function in the electronic version to find the topics of inter...

  • Page 8

    1.2 notational conventions this manual uses the following notational conventions: the letterings for connectors and controls are marked by square brackets and italics. Examples: [volume] control, [mono] button. Texts and values displayed on the device are marked by quotation marks and italics. Examp...

  • Page 9

    Signal word meaning danger! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. Warning! This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in death ...

  • Page 10

    Warning signs type of danger warning – danger zone. General notes 10 led pad 144 144×10 mm rgbw led par.

  • Page 11: Safety Instructions

    2 safety instructions this device is intended to be used as an electronic illumination effect using led technics. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating co...

  • Page 12

    Danger! Danger for children ensure that plastic bags, packaging, etc. Are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.G. Knobs or the like) from the unit. They could swallow the pieces and choke! Ne...

  • Page 13

    Danger! Electric shock caused by short-circuit always use proper ready-made insulated mains cabling (power cord) with a pro- tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis- tered el...

  • Page 14

    Notice! Risk of fire do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. Notice! Operating conditions this device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture....

  • Page 15

    Notice! Power supply before connecting the device, ensure that the input voltage (ac outlet) matches the voltage rating of the device and that the ac outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug ...

  • Page 16: Features

    3 features the device is suitable for almost all applications, for example in clubs, bars, small stages and theatres. It is characterized by compact dimensions and maximum flexibility. Special features of the device: n 144 × colour leds, each 10 mm (36 × red, 48 × green, 36 × blue, 24 × white) n wit...

  • Page 17: Installation

    4 installation unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable f...

  • Page 18

    Notice! Risk of overheating always ensure sufficient ventilation. The ambient temperature must always be below 40 °c (104 °f). Notice! Use of stands when mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the max...

  • Page 19

    Notice! Possible data transmission errors for error-free operation make use of dedicated dmx cables and do not use ordi- nary microphone cables. Never connect the dmx input or output to audio devices such as mixers or ampli- fiers. You can install the unit in hanging or standing position. When in us...

  • Page 20

    Please note that this device must not be connected to a dimmer. Installation 20 led pad 144 144×10 mm rgbw led par.

  • Page 21: Starting Up

    5 starting up create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Starting up led pad 144 144×10 mm rgbw 21 led par.

  • Page 22

    Connect the dmx input of the device to the dmx output of a dmx controller or another dmx device. Connect the output of the first dmx device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last dmx device in the daisy chain is terminated with a re...

  • Page 23: Connections and Controls

    6 connections and controls connections and controls led pad 144 144×10 mm rgbw 23 led par.

  • Page 24

    1 display and function buttons. [enter] confirms a selected value. [down] button to decrease the displayed value by one. [up] button to increase the displayed value by one. [menu] calls up the main menu or a submenu. 2 dmx input. 3 dmx output 4 plug for mains cable. 5 connection for the power cable ...

  • Page 25

    6 locking screws for the mounting bracket. 7 bracket for floor placement or hanging. Connections and controls led pad 144 144×10 mm rgbw 25 led par.

  • Page 26

    Remote control connections and controls 26 led pad 144 144×10 mm rgbw led par.

  • Page 27

    8 button to turn the device on and off. 9 [dmx] button to switch between dmx and stand-alone mode. 10 [slave] button to switch between master and slave mode. 11 [auto 1] , [auto 2] , [speed] buttons to activate automatic mode 1 or 2 and to adjust the programme speed. 12 [up] , [down] buttons to swit...

  • Page 28

    14 [strobe] button to turn the strobe effect on or off. 15 numeric buttons 0 … 9 for direct value input. 16 [sound 1] , [sound 2] buttons to activate sound-control mode 1 or 2. Connections and controls 28 led pad 144 144×10 mm rgbw led par.

  • Page 29: Operating

    7 operating 7.1 starting the device turn on the power using the main switch. After a few seconds, the fan starts. The display shows the current operation mode. 7.2 operating on the unit press [menu] , [up] or [down] repeatedly until the display shows ‘addr’ . Confirm with [enter] . Now you can set t...

  • Page 30

    Press [menu] , [up] or [down] repeatedly until the display shows ‘auto’ . Confirm with [enter] . Use [up] and [down] to select the desired mode ‘aut1’ or ‘aut2’ . Confirm with [enter] . Now you can adjust the progress speed of the programme between ‘sp 1’ and ‘sp 9’ . Press [menu] , [up] or [down] r...

  • Page 31

    7.3 ir remote control press [menu] , [up] or [down] repeatedly until the display shows ‘reno’ . Confirm with [enter] . Use [up] and [down] to select the option ‘on’ to enable ir remote control. Confirm with [enter] . Operating led pad 144 144×10 mm rgbw 31 led par.

  • Page 32

    7.4 menu overview operating 32 led pad 144 144×10 mm rgbw led par.

  • Page 33

    7.5 functions in dmx mode channel value function 1 0…255 master dimmer (0 % to 100 %) 2 0…255 intensity red (0 % to 100 %) 3 0…255 intensity green (0 % to 100 %) 4 0…255 intensity blue (0 % to 100 %) 5 0…255 intensity white (0 % to 100 %) 6 0…255 stroboscope effect (slow to fast) 7 0…15 no function ...

  • Page 34

    Channel value function 80…95 colour mixing with transition 5 96…111 strobe effect 112…127 colour change with fade effect 128…143 colour change 144…159 colour change with strobe effect 160…175 fading out with colour change 176…191 fading in with colour change 192…207 fading out, fading in 208…223 col...

  • Page 35: Technical Specifications

    8 technical specifications leds 144 × colour leds, each 10 mm (36 × red, 48 × green, 36 × blue, 24 × white) number of dmx channels 7 power consumption 20 w operating supply voltage ac 100 – 240 v 50/60 hz fuse 5 mm × 20 mm, 1 a, 250 v, fast-acting housing colour black dimensions (w × h × d) 205 × 25...

  • Page 36

    9 plug and connection assignments this chapter will help you select the right cables and plugs to connect your valuable equip- ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘sound & light’ caution is indicated: even if a plug fits into a socket, t...

  • Page 37: Troubleshooting

    10 troubleshooting notice! Possible data transmission errors for error-free operation make use of dedicated dmx cables and do not use ordi- nary microphone cables. Never connect the dmx input or output to audio devices such as mixers or ampli- fiers. In the following we list a few common problems th...

  • Page 38

    Symptom remedy the unit does not work, no light check the mains connection. Apparently no function despite proper power supply check if the unit is in dmx mode or in ‘slave’ mode. If so, check the unit in another mode. No response to the dmx con- troller 1. Check whether the dmx controller is switch...

  • Page 39: Cleaning

    11 cleaning clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. ...

  • Page 40: Protecting The Environment

    12 protecting the environment for the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. Are properly disposed of. Do not just dispose these materials with your normal household w...

  • Page 41

    This product is subject to the european waste electrical and electronic equipment directive (weee). Do not dispose with your normal household waste. Dispose this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and...

  • Page 42

    Notes 42 led pad 144 144×10 mm rgbw led par.

  • Page 44

    Musikhaus thomann · hans-thomann-straße 1 · 96138 burgebrach · germany · www.Thomann.De.