1. DL manuals
  2. Varytec
  3. Lighting Equipment
  4. LED PAD 7
  5. User Manual

Varytec LED PAD 7 User Manual

Other manuals for LED PAD 7: User Manual

Summary of LED PAD 7

  • Page 1

    Led pad 7 7x10w 5in1 rgbwa led par user manual.

  • Page 2

    Musikhaus thomann thomann gmbh hans-thomann-straße 1 96138 burgebrach germany telephone: +49 (0) 9546 9223-0 e-mail: info@thomann.De internet: www.Thomann.De 17.10.2017, id: 369851.

  • Page 3: Table of Contents

    Table of contents 1 general notes............................................................................................................................................... 6 1.1 further information.....................................................................................................

  • Page 4

    7.6 functions in 6-channel dmx mode........................................................................................... 39 7.7 functions in 9-channel dmx mode........................................................................................... 40 8 technical specifications.................

  • Page 5

    Led pad 7 7x10w 5in1 rgbwa 5 led par.

  • Page 6: General Notes

    1 general notes this manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sur...

  • Page 7

    1.1 further information on our website (www.Thomann.De) you will find lots of further information and details on the following points: download this manual is also available as pdf file for you to download. Keyword search use the search function in the electronic version to find the topics of intere...

  • Page 8

    1.2 notational conventions this manual uses the following notational conventions: the letterings for connectors and controls are marked by square brackets and italics. Examples: [volume] control, [mono] button. Texts and values displayed on the device are marked by quotation marks and italics. Examp...

  • Page 9

    Signal word meaning danger! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. Warning! This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in death ...

  • Page 10

    Warning signs type of danger warning – danger zone. General notes 10 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 11: Safety Instructions

    2 safety instructions this device is intended to be used as an electronic illumination effect using led technics. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating co...

  • Page 12

    Danger! Danger for children ensure that plastic bags, packaging, etc. Are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.G. Knobs or the like) from the unit. They could swallow the pieces and choke! Ne...

  • Page 13

    Danger! Electric shock caused by short-circuit always use proper ready-made insulated mains cabling (power cord) with a pro- tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis- tered el...

  • Page 14

    Notice! Risk of fire do not cover the device nor any ventilation slots. Do not place the device near any direct heat source. Keep the device away from naked flames. Notice! Operating conditions this device has been designed for indoor use only. To prevent damage, never expose the device to any liqui...

  • Page 15

    Notice! Power supply before connecting the device, ensure that the input voltage (ac outlet) matches the voltage rating of the device and that the ac outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug ...

  • Page 16: Features

    3 features the device is suitable for almost all applications, for example in clubs, bars, small stages and theatres. It is characterized by small size, solid construction also for use ‘on tour’ and enormous power. Special features of the device: n 7 × 10 w 5in1 rgbwa leds n 5 colours per lens, so t...

  • Page 17: Installation

    4 installation unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable f...

  • Page 18

    Notice! Risk of overheating always ensure sufficient ventilation. The ambient temperature must always be below 40 °c (104 °f). Notice! Use of stands when mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the max...

  • Page 19

    Notice! Possible data transmission errors for error-free operation make use of dedicated dmx cables and do not use ordi- nary microphone cables. Never connect the dmx input or output to audio devices such as mixers or ampli- fiers. Installation led pad 7 7x10w 5in1 rgbwa 19 led par.

  • Page 20: Starting Up

    5 starting up establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. Starting up 20 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 21

    Connect the dmx input of the device to the dmx output of a dmx controller or another dmx device. Connect the output of the first dmx device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last dmx device in the daisy chain is terminated with a re...

  • Page 22

    When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the dmx output of the master device to the dmx input of the first sl...

  • Page 23: Connections and Controls

    6 connections and controls front panel connections and controls led pad 7 7x10w 5in1 rgbwa 23 led par.

  • Page 24

    1 locking screws for the mounting bracket. 2 infrared sensor for receiving signals from the remote control. 3 leds. 4 bracket for floor placement or hanging. Connections and controls 24 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 25

    Rear panel connections and controls led pad 7 7x10w 5in1 rgbwa 25 led par.

  • Page 26

    5 connection for the power cable. 6 display. 7 dmx input. 8 fan. 9 dmx output. 10 [enter] confirms a selected value. 11 [down] button to decrease the displayed value by one. 12 [up] button to increase the displayed value by one. Connections and controls 26 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 27

    13 [menu] calls up the main menu or a submenu. 14 connection for the power cable to supply additional devices. Connections and controls led pad 7 7x10w 5in1 rgbwa 27 led par.

  • Page 28

    Remote control connections and controls 28 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 29

    15 [slave] toggles operating modes ‘master‘ and ‘slave’. 16 [speed] activates the setting mode for the programme speed. Adjust the speed using the buttons [up] and [down] . 17 [up / down] to select a desired program or increase / decrease a parameter value. 18 [0 … 9] to make numeric settings. 19 [w...

  • Page 30

    22 [auto 1 & 2] activates the ‘preprogrammed automatic show’ 1 or 2. 23 [power] activates or deactivates the device. 24 [dmx] press once to set the dmx address. After pressing twice, the dmx mode can be set. Connections and controls 30 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 31: Operating

    7 operating 7.1 starting the device connect the device to the power supply to start operation. 7.2 main menu press [menu] to activate the main menu. Use [up] / [down] to change the respectively indi- cated value. When the display shows the desired value press [enter]. Operating led pad 7 7x10w 5in1 ...

  • Page 32

    Press [menu]. Press [up] / [down] repeatedly until the display shows ‘addr’ . Press [enter]. Now you can set the number of the first dmx channel to be used by the device (dmx address). Use [up] / [down] to select a value between 1 and 512 (the display shows ‘a001’ … ‘a512’ ). When the display shows ...

  • Page 33

    Press [menu]. Press [up] / [down] repeatedly until the display shows ‘chnd’ . Press [enter]. With [up] or [down] you can now select one of the following dmx modes: n ‘1ch’ (one channel) n ‘5ch’ (five channels) n ‘6ch’ (six channels) n ‘9ch’ (nine channels) this setting is only relevant when the devi...

  • Page 34

    Press [menu]. Press [up] / [down] repeatedly until the display shows ‘auto’ . Press [enter]. With [up] / [down] you can now select one of the two preprogrammed automatic shows ‘aut1’ or ‘aut2’ . Press [enter]. Use [up] / [down] to select a value for the programme speed between 1 and 9 (display shows...

  • Page 35

    Press [menu]. Press [up] / [down] repeatedly until the display shows ‘stat’ . Press [enter]. Press [up] / [down] repeatedly until the display shows ‘red’ (for red), ‘gree’ (for green), ‘blue’ (for blue), ‘Ûhie’ (for white) or ‘anbe’ (for amber). When the display shows the desired value press [enter]...

  • Page 36

    Press [menu]. Press [up] / [down] repeatedly until the display shows ‘slav’ . Press [enter]. The display now shows ‘sla’ . The device is now configured as slave and follows the settings of the master device to which it is connected. In the other operating modes, the device automatically operates as ...

  • Page 37

    7.3 menu overview operating led pad 7 7x10w 5in1 rgbwa 37 led par.

  • Page 38

    7.4 function in 1-channel dmx mode channel value function 1 0…255 colour selection 7.5 functions in 5-channel dmx mode channel value function 1 0…255 intensity red (0 % to 100 %) 2 0…255 intensity green (0 % to 100 %) 3 0…255 intensity blue (0 % to 100 %) 4 0…255 intensity white (0 % to 100 %) 5 0…2...

  • Page 39

    7.6 functions in 6-channel dmx mode channel value function 1 0…255 intensity (0 % to 100 %) 2 0…255 intensity red (0 % to 100 %) 3 0…255 intensity green (0 % to 100 %) 4 0…255 intensity blue (0 % to 100 %) 5 0…255 intensity white (0 % to 100 %) 6 0…255 intensity amber (0 % to 100 %) operating led pa...

  • Page 40

    7.7 functions in 9-channel dmx mode channel value function 1 0…255 intensity (0 % to 100 %) 2 0…255 intensity red (0 % to 100 %) 3 0…255 intensity green (0 % to 100 %) 4 0…255 intensity blue (0 % to 100 %) 5 0…255 intensity white (0 % to 100 %) 6 0…255 intensity amber (0 % to 100 %) 7 0…50 no functi...

  • Page 41

    Channel value function 8 0…255 process speed slow to fast, if channel 7 = 51…152 0…255 microphone sensitivity low to high, if channel 7 = 153…255 (0 to 29: microphone off, 30 to 255 = low to high) 9 0…9 no function 10…255 strobe frequency slow to fast operating led pad 7 7x10w 5in1 rgbwa 41 led par.

  • Page 42: Technical Specifications

    8 technical specifications leds 7 × 5in1 leds (rgbwa), each 10 w beam angle 25° number of dmx channels 1, 5, 6, 9 power consumption 70 w operating supply voltage ac 100 - 240 v 50/60 hz fuse 5 mm × 20 mm, 1 a, 250 v, fast-acting housing colour black dimensions (w × h × d) 270 × 244 × 129 mm (incl. B...

  • Page 43

    9 plug and connection assignments this chapter will help you select the right cables and plugs to connect your valuable equip- ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘sound & light’ caution is indicated: even if a plug fits into a socket, t...

  • Page 44: Troubleshooting

    10 troubleshooting notice! Possible data transmission errors for error-free operation make use of dedicated dmx cables and do not use ordi- nary microphone cables. Never connect the dmx input or output to audio devices such as mixers or ampli- fiers. In the following we list a few common problems th...

  • Page 45

    Symptom remedy the unit does not work, no light check the mains connection. Apparently no function despite proper power supply check if the unit is in dmx mode or in ‘slave’ mode. If so, check the unit in another mode. No response to the dmx con- troller 1. Check whether the dmx controller is switch...

  • Page 46: Cleaning

    11 cleaning clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. ...

  • Page 47: Protecting The Environment

    12 protecting the environment for the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. Are properly disposed of. Do not just dispose these materials with your normal household w...

  • Page 48

    This product is subject to the european waste electrical and electronic equipment directive (weee). Do not dispose with your normal household waste. Dispose this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and...

  • Page 49

    Notes led pad 7 7x10w 5in1 rgbwa 49 led par.

  • Page 50

    Notes 50 led pad 7 7x10w 5in1 rgbwa led par.

  • Page 52

    Musikhaus thomann · hans-thomann-straße 1 · 96138 burgebrach · germany · www.Thomann.De.