Summary of LED PAR 64
Page 1
Manual led par 64 floor 12x8w rgbwauv incl. Remote.
Page 2
2 / 16 table of contents 1. Safety instructions ............................................................................................................................ 3 1.1. For safe and efficient operation ..........................................................................................
Page 3
3 / 16 1. Safety instructions this device is suitable for indoor use (not outdoors) only. All modifications to the device will void the warranty. Repairs are to carry out by skilled personnel only. Use only fuses of the same type and original parts as spare parts. Protect the unit from rain and humi...
Page 4
4 / 16 2. Designated use this device was developed for professional use on stages, in discos, theatres etc. The device is only approved for a connection up to 230v 50/60 hz ac voltage and only for indoor use. Regular breaks during operation increase the lifetime of your device. Avoid convulsions or ...
Page 5
5 / 16 2.1. Overhead installation danger of life! You have to observe the regulations of bgv c1 (formerly vbg 70) and en60598-2-17 installations are to carry out by skilled personnel only. The suspension devices have to be build and measured so they can withstand for an hour the tenfold of the paylo...
Page 6
6 / 16 the maximum drop exceed must not exceed 20cm. A safety rope once exposed to failing load or damaged may not be used furthermore. Adjust the desired inclination angle via the mounting bracket and tighten the screw..
Page 7
7 / 16 3. Introduction thank you for buying the led par 64 floor 12x8w rgbwauv incl. Remote. It is a powerful device. For a successful installation and operation, please read this manual carefully. 4. Connections 4.1. Electrical connections if you wish to change the power supply settings, see the ch...
Page 8
8 / 16 5. Control press menu, to get into the menu. With up/down you can choose the required submenu. Confirm with enter. Do your settings with up/down and confirm with enter. To step back press menu again. 5.1. Structure of the menu menu submenu 1 submenu 2 submenu 3 function addr a001 – a512 setti...
Page 9
9 / 16 5.2. Ir remote power on/off you can set the dmx address when this button is pressed. Double click = channel mode master/slave auto-mode 1/2 speed sound-mode 1/2 you can choose a program or number. Strobe you can use this number buttons to adjust numerical in any program mode. You can choose a...
Page 10
10 / 16 6. Dmx chart 6.1. Mode 1 (1 channel) channel value from value to function 1 0 no function 1 4 color 1 5 9 color 2 10 14 color 3 15 19 color 4 20 24 color 5 25 29 color 6 30 34 color 7 35 39 color 8 40 44 color 9 45 49 color 10 50 54 color 11 55 59 color 12 60 64 color 13 65 69 color 14 70 74...
Page 11
11 / 16 200 204 color 41 205 209 color 42 210 214 color 43 215 219 color 44 220 224 color 45 225 229 color 46 230 234 color 47 235 239 color 48 240 244 color 49 245 249 color 50 250 255 color 51 6.2. Mode 2 (6 channels) channel value from value to function 1 0 255 dimmer red 0-100% 2 0 255 dimmer gr...
Page 12
12 / 16 102 152 automatic program 2 153 203 sound-to-light mode 1 204 255 sound-to-light mode 2 9 0 255 if channel 8 has the value 51-152, you can set the speed of the automatic programs with this channel slow-fast. If channel 8 has the value 153-255, you can set the sensitivity of the microphone. L...
Page 13
13 / 16 7. Technical data power supply voltage ac 110-240 v; 50/60 hz power consumption max. 110 w light source lm type led 6in1 power 8 w number / power 6 x 8w optics beam angle 25° connections strom in schutzko cable xlr in/out 3pol controlling sound-to-light yes automatic yes master-slave yes dmx...
Page 14
14 / 16.
Page 15
15 / 16.
Page 16: B & K Braun Gmbh
16 / 16 importer: b & k braun gmbh industriestraße 2 d-76307 karlsbad www.Bkbraun.Com info@bkbraun.Com.