VAS HT5203 Assembly Instructions Manual - page 4
Model # HT5203
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 72-14494
Page 4
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Align and attach Top and Bottom Side Rails (C, D, E & F) to the Front Frame (A) in place, using the
5/8" Bolts (2) with Washers (3) through the bracket holes into the threaded inserts on the Front
Frame, three bolts per side rail. See detail #1.
3. Attach Back Frame (B) to the Top and Bottom Side Rails (C, D, E & F) using eight 1 3/4" Bolts (1)
with Washers (3) through the post holes. Make sure the threaded inserts on the Back Frame post
are facing front, as shown in detail #1 A.
4. Attach the Floor Leveler (8) to the bottom of Front and Back Frames (A & B) for necessary
adjustment, as shown in detail #1A.
5. Screw four Glass Raisers (4) on the top holes of the frames and completely insert four Suction Cups
(5) into the holes on Bottom Side Rails (D & F) as shown in detail #2.
6. Screw the Threaded Pins (6) into the threaded inserts on Front & Back Frame post, a total of sixteen.
Proceed to put the Suction Cup for Pin (7) on it, make sure they go all the way in and the suction
cups will fully support the glass shelf. See detail #2.