Vassilias R-7010 User Manual

Summary of R-7010

  • Page 1

    Read instructions carefully: read and follow all instructions. Place instructions in a safe place for future reference. Only use in a well ventilated area user manual for gas and quartz tube heater (r-7010) warning: if the information in this manual is not followed exactly. A fire or explosion may r...

  • Page 2

    Warning: 1. The apparatus is not ready for the physically weak, slow response or mental disorders (including children) to use, unless it bears responsibility for the guidance of safety or safe use of the help; 2. Children should be monitored to ensure they do not play apparatus; 3. Heater is not loc...

  • Page 3

    1. Always use heater in accordance with instructions supplied with each heater. Keep instructions in a safe place. 2. Do not place clothes or other materials on the heater. This could cause a fire risk and/or affect the efficiency of the appliance. 3. Do not position heater close furniture. 4. Do no...

  • Page 4

    Using environment your heater consumes oxygen while it is in function. For that reason, adequate ventilation should be provided in rooms in which the heater is used. This ensures the removal of products of combustion and allows the entry of replacement air. Adequate ventilation should considerably r...

  • Page 5

    Purposes. 17. Do not cover your heater. Fabrics, clothing, hangings, net curtains, bed linens and other flammable materials may ignite if placed against the outlets of your heater. 18. In the event of leakage, the appliance should be turned off at the regulator switch-on valve and the regulator disc...

  • Page 6

    24. Do not handle plug with wet hands. 25. The appliance has to be unplugged from the wall socket, using the damp cloth to wipe the enclosure, and then dry it with dry cloth. Fault finding chart for your safety purpose, call local service center if you have problems. Symptoms fault remedy 1. Pilot w...

  • Page 7

    Lighting instruction pos. 1 pos.2 pos.3 1.Lighting instruction a. The heater has three settings. Lighting and minimum (pos.1); medium (pos.2) and maximum (pos.3) b. Place the gas filled cylinder into the back of the heater. C. Clip on the gas regulator to the gas cylinder. D. Turn on the gas regulat...

  • Page 8

    Connecting the cylinder 1. Place the gas filled cylinder into the back of the heater 2. Clip on the gas regulator to the gas cylinder 3. Turn the regulator on. 4. Where the regulator is not supplied please contact your gas dealer to advise of correct type for the gas cylinder being used. 5. Importan...