Vax 30000 User Manual - page 10
Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
9
Operation
Assembly
Push solution tube connector (A)
firmly into solution port (A1).
Twist solution tube connector (A)
a quarter turn to the right to lock
into place.
Wrap solution tube (A) around
hose (B). Ensure that the solution
tube is wrapped loosely enough
to allow the solution to flow freely
through the tube.
Push hose connector (B) firmly into
hose connection port (B1). Twist to
the right until hose connector locks
into place.
After wrapping the tube around the
hose, affix solution tube (A) to hose
(B) using clips provided (C) to hold
it in place.
Push one end of the extension tube
into the handle of the hose.
Push the second extension tube
into the wash head to be used and
push the end of the solution tube
onto the connection port on the
Wash Head / Upholstery Tool.