Vax AirPetVCAP1500 User Manual

Summary of AirPetVCAP1500

  • Page 1

    User guide air pet designed in the uk vcap1500 performance is everything. Vax.Com.Au.

  • Page 2: Contents

    Contents machine overview general safety information getting started maintenance looking after your machine – filters looking after your machine – advanced cleaning looking after your machine – removing blockages faqs other information 1 2 3 5 6 7 9 10 12 13 contents 1.

  • Page 3: Machine Overview

    1. Hose connector 2. Dirt container 3. Cyclone separator and shroud 4. Carry handle 5. Dirt container release button 6. Cord rewind button (hidden) 7. Floor head parking slot 8. On/off button 9. Post-motor fi lter cover 10. Primary separator 11. Antibacterial hepa media post-motor fi lter (note: pos...

  • Page 4: General Safety Information

    This vacuum cleaner is intended for household use only and not for commercial or industrial use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the on/off switch on the vac...

  • Page 5: General Safety Information

    Warning: always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments. Caution: the vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket,...

  • Page 6: Getting Started

    Operating the appliance and accessories 1 2 2 1 assembling your vacuum cleaner 2 1 caution: the vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket, make sure the switch is in the ‘off ’ position. Hold the vacuum cleaner fi rmly when starting and in use. Note:...

  • Page 7: Maintenance

    Packing away and storage emptying and cleaning the dirt container 1 2 note: for convenience there is a parking slot located at the rear of the vacuum cleaner where the fl oor head and tubes can be attached for storage and carrying. Note: for best cleaning results the dust bin should be emptied after...

  • Page 8

    Cleaning the pre-motor fi lter 1 2 24hr tap note: replace the fi lter when discoloured or damaged (frequency will depend on level of use). Warning: water temperature should not exceed 40°c when washing the pre-motor fi lter. Warning: ensure fi lter is completely dry before inserting back into the va...

  • Page 9: Vax.Com.Au

    1 2 tap 1 2 note: replace the fi lter when discoloured or damaged (frequency will depend on level of use). Warning: do not wash the post-motor fi lter. Follow the instructions to unlock the cover to remove the post-motor fi lter. Tap to clean the post-motor fi lter and put back in place. Tap to clea...

  • Page 10: Looking After Your Machine

    Advanced cleaning - cyclone separator 1 note: replace the fi lter when discoloured or damaged (frequency will depend on level of use). Warning: always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container, or before connecting/d...

  • Page 11: Looking After Your Machine

    Hose blockages accessory blockages removing blockages from the mini turbo tool warning: to reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket. Important: if the...

  • Page 12: Looking After Your Machine

    Removing blockages from the turbo brush lay the turbo brush fl oor head on a fl at surface and turn over to expose the brushbar. Using a pair of scissors, cut through any threads or hairs caught by the brushbar that have wrapped around the guides. 11 looking after your machine - removing blockages.

  • Page 13: Faqs

    Faqs warning: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Is there an accessory missing? • check the ‘machine overview’ page in this guide to make sure that the part is definitely included in your unit. • if it is missing, we...

  • Page 14: Other Information

    13 other information vax service & help vax careline: australia 1300 361 505 new zealand 0800 800 900 monday-friday 8.30am to 5.00pm if you have queries or concerns about using your vax, call the vax careline. Calls are charged at the standard local rate. Please make a note of the serial number and ...

  • Page 15: Notes

    Notes 14 vax.Com.Au.

  • Page 16: Performance Is Everything.

    Distributed by techtronic industries australia pty. Ltd. Level 1, 660 doncaster road, doncaster, australia 3108. Service line: au: 1300 361 505 / nz: 0800 800 900 performance is everything. Vax.Com.Au.