Vax C86-MA Series User Manual - Vax.Co.Uk
6
vax.co.uk
Looking after your machine - Filters
Cleaning the HEPA post-motor filter
Cleaning the pre-motor filter
Advanced cleaning - cyclone seperator
WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
NOTE: Wipe to clean. Parts must be completely dry before using your machine.
WARNING: Do not wash the post-motor filter.
tap
24hr
tap
1
1
2
IMPORTANT: The motor is equipped with a thermal
cut-out. If for any reason the unit should overheat, the
thermostat will automatically turn the unit off. Should this
occur, unplug the vacuum cleaner from the electrical socket
and turn off the switch. Remove and empty the dirt container.
Check the hose for blockages. Clean the filters. Allow the
unit to cool for approximately one hour (if you have cleaned
the filters you will need to wait twenty four hours for the
filters to dry before putting them back in the machine).
To re-start the machine, plug it into an electrical socket
and switch it back on.
40 C max
o