- DL manuals
- Vax
- Vacuum Cleaner
- Dual V Advance
- User Manual
Vax Dual V Advance User Manual
Summary of Dual V Advance
Page 1
User guide dual v advance designed in the uk vx3 performance is everything. Vax.Com.Au.
Page 2: Contents
Contents machine overview general safety information getting started how to use looking after your machine faqs other information 1 2 3 5 6 14 17 18 contents 1.
Page 3: Machine Overview
1. Handle grip 2. Trigger (hidden) 3. Spinscrub caddy 4. Spinscrub hand tool 5. On/off switch 6. Wash/rinse/max extract switch 7. Clean water tank release button 8. Carry handle 9. Clean water tank 10. Dirty water tank carry handle 11. Dirty water tank 12. Hose connection port 13. Solution tube conn...
Page 4: General Safety Information
This carpet cleaner is intended for household use only and not for commercial or industrial use. When using the carpet cleaner basic safety precautions should always be observed, including the following: 1. Do not leave the carpet washer unattended when plugged in. Unplug it from socket when not in ...
Page 5: General Safety Information
Warning: always switch off and unplug your machine from the electrical outlet before filling and emptying the clean water tank, emptying the dirty water tank, before assembling, opening, before connecting/disconnecting the attachments, or carrying out maintenance or troubleshooting checks and storag...
Page 6: Getting Started
Place handle on machine. Please read the safety information before use (p3-4) assembling your carpet washer handle and spinscrub wash tool turn the dial clockwise to secure the handle. Place spinscrub tool in caddy. Assembling your tool caddy and hose attach top caddy section to unit. Turn locking t...
Page 7: How to Use
Before you begin cleaning do not saturate your carpet. • test for colourfastness – wet a white absorbent cloth with the solution. In a small, hidden area of your carpet and upholstery, gently rub the surface with the dampened cloth. Wait ten minutes and check for colour removal or bleed with white p...
Page 8: How to Use
Operating your carpet washer wash: spinscrub brushes deep clean your carpets with water and solution to remove dirt and stains. Rinse: only water is released to help remove solution residue. Max extract: no water/solution mix is released onto your carpets (even when trigger is pressed) extracting an...
Page 9: How to Use
Unwrap power cord and plug unit in. Press trigger to release solution. Turn the machine on. For best results apply solution on the forward stroke and release the trigger to recover solution on the backward stroke. To avoid saturating your carpet, do not use more than 4 wet strokes over one area. Alw...
Page 10: How to Use
Unwrap power cord and plug unit in. Then, click the back section into place. Fill the clean water and solution tank with hard press trigger to release solution. Turn the machine on. For best results apply solution on the forward stroke and release the trigger to recover solution on the backward stro...
Page 11: How to Use
Press trigger to release water. For best results apply water on the forward stroke and release the trigger to recover water on the backward stroke. To avoid saturating your carpet more than 4 wet strokes over one area. Always end with dry strokes. Turn the machine on. Recline the machine. When the m...
Page 12: How to Use
Turn the machine on. Recline the machine. For superior drying performance use in combination with the max extract pedal. The brushes will not rotate when the max extract pedal is pressed. For best results use straight parallel strokes. Extraction occurs during forward and backward strokes. Set the w...
Page 13: How to Use
Picking up spills for small spills, use the upholstery wash tool provided. Remove hose. Place hose into hose connection port and turn clockwise to secure. Turn the machine on. Pull wash tool back over spill to pick up liquid. Turn the machine on. Recline the machine. Set the wash/rinse/max extract s...
Page 14: How to Use
Using the spinscrub and upholstery wash tool remove hose. Align solution tube with connector port. Push in and turn clockwise to secure. For best results apply solution on the forward stroke and release the trigger to recover on the backward stroke. The spinscrub wash tool has rotating brushes to ta...
Page 15: Looking After Your Machine
Warning: emptying the clean water tank, emptying the dirty water tank, or before connecting / disconnecting the attachments. Emptying the dirty water tank note: rinse out tank with clean water and leave to air dry before storing your machine. Remove any debris from remove the the dirty water tank fr...
Page 16: Looking After Your Machine
Cleaning the nozzle if lint or other debris becomes lodged in nozzle, it can be removed for cleaning. To replace nozzle, line up tabs on nozzle with holes in cleaner. Slide tabs into holes. Press down on nozzle to correctly will result in poor water pick up. Unplug cleaner from electrical outlet. Re...
Page 17: Vax.Com.Au
Warning: maintenance/troubleshooting checks. Removing blockages from the brushes advanced brush maintenance locate and remove the spinscrub brushes as described above. Use a screwdriver to unclip both spinscrub covers. Brushes can be cleaned under running water. Leave spinscrub hear a ‘click’ when t...
Page 18: Faqs
Faqs is there an accessory missing? Why won’t the carpet washer turn on? • it may not be plugged into the electrical socket correctly: ensure that the plug is pushed in securely and switched on • the power button on the unit hasn’t been fully depressed the dirty water tank and check hose, brushbar f...
Page 19: Other Information
Other information vax service & help vax careline: australia 1300 361 505 new zealand 0800 800 900 monday-friday 8.30am to 5.00pm if you have queries or concerns about using your vax, call the vax careline. Calls are charged at the standard local rate. Please make a note of the serial number and mod...
Page 20: Performance Is Everything.
Distributed by techtronic industries australia pty. Ltd. Level 1, 660 doncaster road, doncaster, australia 3108. Service line: au: 1300 361 505 / nz: 0800 800 900 performance is everything. Vax.Com.Au.