Vax.Co.Uk c86-ia-(be, pe, te) impact 306 let’s get started.
Do’s basic safety precautions 3 turn off all controls on the vacuum cleaner before disconnecting or connecting the power cord. 3 always make sure filters are in place before use. 3 always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories. 3 keep all openings c...
Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical accessories what to do if it goes wrong getting in touch impact 306 accessory hose and handle combination floorhead crevice tool dusting brush 4.2m stretch hose...
Before you begin cleaning • always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. • the vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat...
Cleaning the shroud press dirt container release button and lift to remove. Twist the shroud to remove. Max 40˚c hold dirt container over a bin and pull the dirt release clip on the bottom of the dirt container, allowing dirt/debris to fall out. Tap the shroud over a bin to remove any dirt/debris. R...
Taking care of your machine press cord rewind button to retract cord into vacuum cleaner. Place floor head into parking slot on the back of vacuum cleaner for storage and carrying. Storing your vacuum cleaner tip replace the post-motor filter every 12 months. Post-motor filter maintenance squeeze th...
Removing dirt/debris from turbo tool* accessories removing a blockage from the hose important: remove accessory from hose or telescopic extension tube before performing maintenance or trouble shooting checks tip to test for a blockage in the hose, drop a small ball of paper into the hose. The paper ...
• the filters may be clogged, clean the filter. Go to ‘taking care of your machine’ solution problem warning: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance /troubleshooting checks. What to do if it goes wrong • check the ‘this pack contains’ panel on ...
Vax ltd., kingswood road, hampton lovett, droitwich, worcestershire, wr9 0qh, uk email: info@vax.Co.Uk website: vax.Co.Uk version 2.0 eec statement of compliance: manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the c86-ia-(be, pe, te) is manufactured in complia...
