Summary of LiFE
Page 1
U85-lf-b cordless upright vacuum let’s get started. Life.
Page 2: Let’S Talk Safety
Let’s talk safety basic safety precautions don’ts do’s • this cordless upright is intended for household use only and not for commercial or industrial use. • only use the cordless upright indoors and keep the area your cleaning well lit. • keep fingers, hair and loose clothing from moving parts and ...
Page 3
• use only the vax recommended charger and accessories with this cordless upright. • turn off all controls on the cordless upright before disconnecting or connecting the battery and before carrying out any maintenance. • take extra care when cleaning on the stairs. • always protect the charger cable...
Page 4: @vaxuk
Thank you for buying this life cordless vacuum. Taking care of your floors the life is designed to make cleaning as quick and convenient as possible and this user guide will help you get the most out of your machine. The life is perfect for regular cleaning tasks on your floors. Taking care of your ...
Page 5: Contents
Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical what to do if it goes wrong getting in touch notes lithium-ion battery dual power included with your machine docking station.
Page 6: Technical Specification
Name life code u85-lf-b part number 1-1-135634 voltage 18v weight 3.3kg technical specification subject to technical change without notice. On/off and brushbar control handle battery slot battery charge indicator dirt container floor head brushbar on/off indicator floorhead removal button dirt conta...
Page 7: Getting Started
Getting to know your machine getting started line up floor head with the main body, push firmly together until floor head locks into place. Assembling your life cordless vacuum please read ‘let’s talk safety’ at the beginning before use push the handle into the main body. Insert screw from the rear ...
Page 8: Using Your Machine
Operating your life cordless vacuum plug charger into the mains. Push battery firmly into docking station. Led indicator will illuminate within 2 seconds if pushed in correctly. Initial charge should be for 10 hours. Before inserting the battery make sure on/off and brushbar control: on machine is s...
Page 9: Taking Care of Your Machine
Taking care of your machine using your machine press dirt container quick release button, allowing dirt to fall out. Push dirt container release clip to remove dirt container. Advanced cleaning press the dirt container quick release button, to access separator. Twist the separator to unclip and pull...
Page 10: Taking Care of Your Machine
Push dirt container release clip to remove dirt container. Remove the foam filter. Cleaning the filter tap the foam filter to remove any dust and debris. Pull lid of filter cap upwards. Foam filter can be washed with water max 40’c. Taking care of your machine let’s talk technical leave at least 24 ...
Page 11: Let’S Talk Technical
Let’s talk technical press the floor head removal button to release the floor head from the main body. Remove any blockage and reassemble the machine. Remove screws as indicated on the floor head plate with a cross head screw driver. Lift floor head plate to access brushbar and belt. Lift the brushb...
Page 12: Let’S Talk Technical
Let’s talk technical notes machine: battery charge indicator all three leds will light momentarily when the power switch is turned on. The battery charge indicator will then indicate remaining capacity as below: 3 leds lit – remaining capacity is more than 75% 2 leds lit – remaining capacity is more...
Page 13: Let’S Talk Technical
Let’s talk technical notes.
Page 14: What To Do If It Goes Wrong
What to do if it goes wrong • check the battery is inserted correctly into the machine. • the battery may not be charged, remove and charge battery. • battery might be too hot, remove and allow to cool for 30 minutes. Replace battery. • the motor thermostat may have tripped. If this has happened, sw...
Page 15: Getting In Touch
Getting in touch † registration required. Terms and conditions apply. * calls are charged at the uk local rate. Please make a note of the serial number and model number of the product before calling..
Page 16: Get In Touch
Get in touch 0330 026 8455 vaxvacuums info@vax.Co.Uk vax.Co.Uk @vaxuk eec statement of compliance: manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the u85-lf-b is manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive...