Vax MACH PET Let's Get Started - Let’S Talk Technical
of
16
Removing blockages from the TurboTool
IMPORTANT: Remove accessory from hose or telescopic extension tube before performing maintenance or trouble
shooting checks.
Remove the hose from the vacuum cleaner and
telescopic extension tube. Remove any blockage
by inserting a wire coat hanger into the hose.
Removing blockages from the hose
Let’s talk technical
Slide the locking ring
to remove.
Using a pair of scissors,
cut any hair or debris free
from around the brushes.
Lift and separate
the housing.
Line up the tabs on front of
housing and push together
to refit. Slide locking ring
into groove to secure.
Tabs
To test for a blockage in
the hose, drop a small ball
of paper into the hose. The
paper will drop through if
the hose is clear.