1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. pet pro VX39
  5. Let's Get Started

Vax pet pro VX39 Let's Get Started - We’Re Here If You Need Us

Manual is about: CYCLONIC BARREL VACUUM

Summary of pet pro VX39

  • Page 1

    Let’s get started. Vx39 cyclonic barrel vacuum vax.Com.Au vax.Co.Nz pet pro vacuum clean er.

  • Page 2: Let’S Talk Safety

    Let’s talk safety basic safety precautions don’ts do’s this vacuum cleaner is intended for household use only and not for commercial or industrial use. Read all the instructions before using this appliance • only use the vacuum cleaner indoors and keep the area you’re cleaning well lit. • keep finge...

  • Page 3

    Children should not play with the vacuum cleaner. Cleaning and user maintenance should not be made by children without supervision • only vax recommend tools and accessories should be used with this vacuum cleaner • vax recommends the use of a residual current device rating of 30 ma or less. • if th...

  • Page 4: We’Re Here If You Need Us

    Thank you for buying this pet pro barrel vacuum. Taking care of your carpets and hard floors the pet pro barrel vacuum is designed to make vacuuming carpets and hard floors regularly as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintainin...

  • Page 5: Contents

    Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine what to do if it goes wrong getting in touch accessories notes pet pro barrel vacuum included with your machine filters turbotool dusting brush crevice tool upholstery tool combinat...

  • Page 6: Technical Specification

    Getting to know your machine name pet pro barrel vacuum voltage 220-240v ~ 50hz wattage 2400w cord length 8m weight 6.3kg technical specification subject to technical change without notice. Filter pack* vcp7ptflt2 accessories & consumables * to purchase consumables and accessories, please visit vax....

  • Page 7: Getting Started

    Assembling your vacuum cleaner keep you vax like new please read ‘let’s talk safety’ at the beginning before use getting started * to purchase consumables and accessories, please visit vax.Com.Au caution: always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments, o...

  • Page 8: Using Your Machine

    Using your machine operating the appliance adjust the variable power dial to increase or decrease the suction. Fully unwind the power cord. A yellow mark on the cord indicates the recommended cord length. Do not exceed the cord length beyond the yellow mark. 1 2 taking care of your machine.

  • Page 9: Taking Care of Your Machine

    Warning: always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container or before connecting/disconnecting the attachments. Important: filters need to be cleaned everytime you empty the dirt container for best cleaning results. Do...

  • Page 10: Taking Care of Your Machine

    Taking care of your machine taking care of your machine important: water temperature should not exceed 40°c when washing the pre-motor filter. Allow to dry completely before replacing in the vacuum cleaner. Cleaning the pre-motor filter 24hr tap to remove excess dirt for a quick clean. Wash when a d...

  • Page 11: Taking Care of Your Machine

    Taking care of your machine cleaning the shroud note: the shroud is accessed by removing the dirt container lid and is located underneath the pre-motor filter. Important: water temperature should not exceed 40°c when washing the shroud. Allow to dry completely before replacing in the vacuum cleaner....

  • Page 12: Taking Care of Your Machine

    Taking care of your machine taking care of your machine hose blockages the flexible hose may be disconnected from the vacuum cleaner. Carefully remove any blockages found and reconnect the hose securely. Accessory blockages remove accessory from the hose/telescopic tube. Carefully remove the blockag...

  • Page 13: Taking Care of Your Machine

    Taking care of your machine operating the appliance removing blockages from the turbobrush locking ring to re-assemble the turbotool, ensure that the tabs are engaged and pivot the lower housing closed. Slip the locking ring over the neck of the turbotool and into the groove to finish. Turn the turb...

  • Page 14: What To Do If It Goes Wrong

    • check the ‘contents’ page in this guide to make sure the part is definitely included in your unit. • if it is missing, we’re here to help. Simply call us on aus: 1300 361 505 / nz: 0800 800 900 • the dirt container may be incorrectly installed; remove the dirt container from the unit by pressing t...

  • Page 15: Getting In Touch

    * calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Getting in touch.

  • Page 16: Accessories

    Accessories notes don’t forget your accessories! Order at: www.Vax.Com.Au / www.Vax.Co.Nz pro cleaning kit model no. Vpck crevice tool for awkward gaps and crevices. Upholstery attachment gently cleans large areas of upholstery, curtains, sofas and chairs. Pet hair removal attachment tackles stubbor...

  • Page 17: Accessories

    Accessories notes.

  • Page 18: Notes

    Notes notes.

  • Page 19: Notes

    Notes notes.

  • Page 20

    Distributed by techtronic industries australia pty. Ltd. 31 gilby road, mt waverley, vic 3149 australia. Careline au: 1300 361 505 www.Vax.Com.Au careline nz: 0800 800 900 www.Vax.Co.Nz.