Vax power 7 VCP7P2400 User Manual - General Safety Information
General Safety Information
WARNING: Always switch off and unplug
the vacuum cleaner from the electrical outlet
before assembling, opening or emptying the dirt
container, or before connecting/disconnecting
the attachments.
CAUTION: The vacuum cleaner is a very
powerful unit. Before plugging the cord into the
electrical outlet, make sure the switch is in the
‘off’ position.
IMPORTANT: If the inlet, hose or telescopic
tube is blocked, switch off the vacuum cleaner
and remove the blockage(s) before re-starting
the vacuum cleaner. See Maintenance: Clearing
blockages.
IMPORTANT: Cleaning and replacing
filters maintains vacuum performance. Vax
recommends that they should be checked and
cleaned periodically (depending on the level of
use) and replaced accordingly. Make sure all
filters are completely dry before inserting back
into the vacuum cleaner.
IMPORTANT: The motor is equipped with
a thermal cut-out. If for any reason the
unit should overheat, the thermostat will
automatically turn the unit off. Should this
occur, unplug the vacuum cleaner from the
electrical outlet and turn off the switch. Remove
dirt container and empty. Clean filters. Allow
the unit to cool for approximately one (1) hour.
To re-start, plug into an electrical outlet and
switch back on.
This vacuum cleaner is intended for household use
only and NOT for commercial or industrial use.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.
DAMAGE TO THE VACUUM CLEANER CAUSED
AS A DIRECT RESULT OF NOT ADHERING TO
THE GENERAL SAFETY INFORMATION AND
THE INSTRUCTIONS IN THIS USER GUIDE
INVALIDATES THE WARRANTY.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
4