1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. Power U84-M1-Be
  5. Let's Get Started

Vax Power U84-M1-Be Let's Get Started - Accessories

Summary of Power U84-M1-Be

  • Page 1

    U84-m1-be u84-m1-pe u84-m1-re u84-m1-te let’s get started. Power powerful performance.

  • Page 2: Let’S Talk Safety

    Let’s talk safety basic safety precautions don’ts do’s • this vacuum cleaner is intended for household use only and not for commercial or industrial use. • only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • keep fingers, hair and loose clothing away fro...

  • Page 3: As Instructed In This Guide.

    Or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the hazards involved. Children shall not play with the vacuum cleaner. Cleaning and user maintenance shall not be made by ch...

  • Page 4: @vaxuk

    Thank you for buying this power vacuum taking care of your carpets and hard fl oors the power is designed to make vacuuming carpets and hard fl oors regularly, as eff ective and effi cient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard ...

  • Page 5: Contents

    Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical accessories what to do if it goes wrong getting in touch notes power 2-in-1 tool included with your machine turbotool up-top-tool hard floor adaptor power pet/r...

  • Page 6: Technical Specifi Cation

    Getting to know your machine name power voltage 220-240v~50hz wattage 850w cord length 6-8m weight 6.1kg technical specifi cation subject to technical change without notice. Pre-motor filter 1-7-137046 post-motor filter 1-7-137047 pro cleaning kit (type 2) 1-1-133326-00 turbotool (type 5) 1-1-134418-...

  • Page 7: Getting Started

    Assembling your vacuum cleaner press the release clip on the stretch hose, line up and push the hose into the handle. Slide the handle down into the main body of the vacuum cleaner. Line up the stretch hose with hose guides, push and clip stretch hose into place. The end of the stretch hose will han...

  • Page 8: Using Your Machine

    Using your machine plug vacuum cleaner into the mains and switch on. Turn height adjuster dial to desired setting. Place foot on fl oorhead and pull handle to recline. Press the on/off pedal to switch on. Using your machine important: always switch off the vacuum cleaner before disconnecting or conn...

  • Page 9: Using Your Machine

    Using your machine pull and release the stretch hose from hose guides. Unclip the hose end on the accessory hose. Pull and remove accessory hose from the base of vacuum cleaner. Line up and push the end of the stretch hose onto the accessory hose until it clicks into place. Using the hose and access...

  • Page 10: Using Your Machine

    Using your machine press the handle release clip, pull and remove the handle out of the main body. Attach the 2-in-1 crevice/ dusting brush to the end of the handle. Turn brush bar height adjuster dial to highest setting before pressing the on/off pedal to switch the vacuum on. Taking care of your m...

  • Page 11: Taking Care of Your Machine

    Taking care of your machine important: the motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off . Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the fi lters . Wash the fi ...

  • Page 12: Taking Care of Your Machine

    Taking care of your machine let’s talk technical turn the dirt container lid anti-clock wise , lift and remove the lid from dirt container. Cleaning the separator post-motor fi lter maintenance pull the fi lter tab and remove the pre-motor fi lter. Lift the separator out of the dirt container. Tap th...

  • Page 13: Let’S Talk Technical

    Removing blockages from the turbotool removing debris from the brushbar removing a blockage from the hose using a pair of scissors remove any threads or hair caught around the brush bar. Press the release clip on the stretch hose, pull and remove hose from the handle. Slide the locking ring to remov...

  • Page 14: Let’S Talk Technical

    Let’s talk technical accessories replacing the belt switch off your vacuum cleaner at the main socket and unplug. Unclip the 2 small wheels from the base of the vacuum to enable you to remove the screws from behind. Note: the screw for the height adjuster dial is located here. Remove the 9 screws fr...

  • Page 15: Accessories

    Accessories don’t forget your accessories! Order at: www.Vax.Co.Uk/spares-and-solutions pro cleaning kit 1-1-133326-00 all our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on ...

  • Page 16: What To Do If It Goes Wrong

    • check the ‘this pack contains’ panel on the box to make sure the part is included with your vacuum cleaner. • the plug may not be fully pushed into the electrical socket. • check the fuse in the plug if this needs replacing, always replace with a 13amp fuse. • the motor thermostat may have tripped...

  • Page 17: †

    † † registration required. Terms and conditions apply, see vax.Co.Uk for details. * calls are charged at the uk local rate. Please make a note of the serial number and model number of the product before calling. Getting in touch.

  • Page 18: Notes

    Notes notes.

  • Page 19: Notes

    Notes notes.

  • Page 20: Get In Touch

    Get in touch 0330 026 8455 vaxvacuums info@vax.Co.Uk vax.Co.Uk @vaxuk eec statement of compliance: manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the u84-m1-(be/pe/re/te) manufactured in compliance with the following directives: safety: 2006/95/ec low voltage ...