Uk service & help - vax care 0870 6061248 monday to friday 9.00am to 5.00pm. An answer phone is available out of these hours. If you have queries or concerns about using your vax, call the helpline. Calls are charged at the uk national rate. Please make a note of the serial number and model number o...
2 1 handle grip 2 on-board hose 3 on/off switch 4 crevice tool and removable dusting brush 5 cleaning head access window 6 flexible cleaning head 7 see-through dust canister 8 hose connector 9 dust canister release 10 storage hanging loop 11 power lead holder 12 dusting brush holder 13 quick release...
Putting your cleaner together push the handle down on to the top of the unit. Secure the handle with the screw supplied. Place the tools into their storage positions: (a) hose and (b) upholstery tool. 1 2 3 3 a b.
4 operating the vacuum cleaner important: make sure the dust canister is in place before operating. Storing/removing the power lead turn the quick release clip for easy power lead removal. Plug the lead into a power socket. Turn the cleaner on, using the on/off switch located on the side of the mach...
5 operating the vacuum cleaner using the attachments pull the hose connector flap down. It is located on the front of the dust container. Gently slide the hose into the hole until it clicks into place. To use the crevice tool: remove the brush from the end. Re-attach for dusting (store the brush on ...
6 dust canister and filter important: to reduce the risk of injury from moving parts, unplug cleaner before servicing. Removing the dust canister press the latch on the front of the dust canister and pull out. Hold the dust canister over a waste bin. Pull the filter up and out of the dust canister. ...
Dust canister and filter replacing the filter replacing the dust canister gently push the filter back into the dust canister. Align the bottom of the dust canister with the hole opening. Hold down the button and gently push the dust canister into place. You will feel it lock into place. 4 5 7.
8 general maintenance clearing blockages in the cleaning head to remove a blockage in the cleaning head: insert the end of a standard (flat head) screwdriver into the slot and pry the cleaning head access window out. Pull out the obstruction and return the cleaning head access window back into its p...
Troubleshooting problem cleaner won’t run cleaner won’t pick-up/loss of suction dust escaping from cleaner cleaner tools won’t pick up possible reasons 1. Power lead not firmly plugged into socket. 2. Blown fuse or tripped circuit breaker. 3. Needs service. 1. Dust canister not installed correctly. ...
Safety • do not leave the appliance when plugged in. Unplug it from the socket when not in use. • to prevent electric shock, do not use outdoors or on wet surfaces. • do not allow to be used as a toy. Close attention is necessary when used by or near children or the infirm. • use only as described i...
11 (this page has been left intentionally blank).
Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility declare that the product powerflex is manufactured in compliance with the following: safety: 72/23/eec low voltage directive as modified by 93/68/eec emc: 89/336/eec electromagnetic compatibility dir...
