Vax PowerHeat ACH1V101 Let's Get Started - Getting Started

Assembling your appliance

IMPORTANT: Remove all the packaging covering the appliance.

The wheel plates should only be fitted between the outer fins of the radiator with the ‘U’ shaped wheel plate fitted 

on the side nearest the control panel. 

Turn the radiator upside 

down on a carpet or 

soft surface to avoid 

any damage.

Tilt the wheel plate and 

guide the curved end 

of the clamp through 

and over the hole. 

Make sure it securely 

hooks into place.

Turn and stand the appliance in the upright position. 

Allow the oil to re-disperse and settle.

Unscrew and remove the 

wing nut from the clamp 

and hook the clamp around 

the outer edge of the fin, 

nearest the control panel.

Push the other end of the 

clamp through the second 

hole and tighten securely 

into position using the 

wing nut.

Line up the ‘U’ shaped 

wheel plate making sure 

the castor wheels face out 

towards the control panel. 

Repeat the process for 

the (straight) second 

wheel plate. Attach 

to the outer fin on 

the opposite side 

of the radiator.

Getting started