Summary of Remo Classic VS-077
Page 1
Easy guide vs-033 please read carefully before using your vs-033. Always fully extend mains cable before use..
Page 2
Important information - save these instructions congratulations on the purchase of your vs-033 cylinder cleaner. In order to get the best performance from this product please read and retain these instructions. When using electrical appliances, in order to reduce the risk of fire, electric shock, an...
Page 3
1 2 how to use your vs-033 assembling the appliance fig. 1 the telescopic extension tubes can be lengthened by pressing the button & pulling the tubes apart. Fig. 2 to attach the flexible hose to the vacuum cleaner, push the connecting end of the flexible hose into the attachment point on the vacuum...
Page 4
3 4 how to use your vs-033 adjusting the cleaning tool for carpets & hard floors fig. 3 hard floor position (tiles, parquet floors, etc.) – the cleaning tool’s brush must be in the lower position. Press on the rocker switch to lower it. Fig. 4 carpet or rug position – the cleaning tool’s brush shoul...
Page 5
5 6 7 how to use your vs-033 fully extend the mains cable and plug it into a standard domestic outlet. Fig. 5 press the foot pedal to start the vacuum cleaner. To stop it press the pedal again. Fig. 6 press the foot pedal to recoil the power lead. Fig. 7 the hose grip has a bleed valve which allows ...
Page 6
Min max bag full 8 9 how to use your vs-033 fig. 8 vacuum power can be adjusted electronically by moving the variable power control. Using the accessories fig. 9 open the accessory storage compartment (fig. 9a). These accessories can be fitted onto the tubes or directly onto the end of the flexible ...
Page 7
10 11 12 how to use your vs-033 fig. 10 if you wish to pause briefly during vacuuming i.E. To move a piece of furniture or a rug, use the special parking position on your vacuum cleaner. Slide the hook attached to the large cleaning tool into the slot on the rear of the appliance. When you have fini...
Page 8
13 14 how to care for your vs-033 your appliance is equipped with a dust bag. If you notice that the vacuum cleaner seems to be less efficient than usual, check the dust indicator by selecting the maximum power and lifting the cleaner tool off the floor. If it turns red, change the bag. To change th...
Page 9
15 16 to change the filters motor protection filter fig. 15 the filter is located in the dust bag compartment and protects the motor from dust. To reach this filter, lift up the grill which secures it and replace it with a new one. We recommend changing the filter after 5 bag changes or when it appe...
Page 10
17 17 to clean and dry the filters motor protection filter fig. 15 the filter is located in the dust bag compartment and protects the motor from dust. To reach this filter, lift up the grill which secures it and replace it with a new one. We recommend changing the filter after 5 bag changes or when ...
Page 11
Replacement parts replacement parts vs-033 – 5 bags part number 1-9-124757-00 vs-033 filter pack part number 1-9-124813-00 dust bag indicator when the indicator light comes on or when the suction power reduces substantially, this indicates that you should change/empty the dust bag. Attention: if aft...
Page 12
Uk service & help – vax care 0870 6061248 mon – fri. 9:00am to 5:00pm. An answerphone is available out of these hours. If you have queries or concerns about using your vax, call the helpline. Calls are charged at the uk national rate. Please make a note of the serial number and model number of your ...