Summary of S84-W7-P
Page 1
Powerful steam cleaning from floor to ceiling s84-w7-p steamfresh power plus let’s get started..
Page 2: Let’S Talk Safety
Let’s talk safety basic safety precautions don’ts do’s this steam cleaner is intended for household use only and not for commercial or industrial use. • only use the steamer indoors and keep the area you’re cleaning well lit. • keep fingers, hair and loose clothing away from moving parts and opening...
Page 3: As Instructed In This Guide.
• children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • please refer to floor/surface manufacture’s care recommendations before use, and test your flooring/carpet/rugs/surfaces by running the steamer over a small hidden area. I...
Page 4: @vaxuk
Thank you for buying this steam fresh power plus taking care of your sealed hard floors and surfaces the steam fresh power plus is designed to make the regular cleaning of your home as effective and efficient as possible. This user guide will help you get the most out of your machine. Maintaining yo...
Page 5: Contents
Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine notes accessories what to do if it goes wrong getting in touch steam fresh power plus included with your machine microfibre pad x2 carpet glider accessory bag 360⁰ connector & adapt...
Page 6: Technical Specification
Getting to know your machine name steam fresh power plus voltage please refer to product rating label wattage please refer to product rating label cord length 8m weight 3.4kg technical specification subject to technical change without notice. Microfibre cleaning pads (type 1) 1-1-131448-00 hard wate...
Page 7: Getting Started
Push the steam reach wand down into the floorhead until it clicks into place. Push the handheld down onto the steam reach wand until it clicks into place. The steamer is not free standing and must always be stood either in the wall bracket or safely and securely against a wall or fixed structure whe...
Page 8: Getting Started
Getting started fully assemble the unit and position it against the wall where it will be stored. Stand the unit close and upright against the wall. Firmly press the handheld and wall storage clip to fix the wall storage clip to the wall in the correct place. Fully assemble the unit and position it ...
Page 9: Using Your Machine
Using your machine press the twin tank release button down, grip the twin tank and pull to remove. Fill the detergent tank up to the fill line with water and top up with detergent replace the cap and push firmly to close. Grip the twin tank and pull the tab on the water tank cap to open. Before repl...
Page 10: Using Your Machine
Using your machine important: never use the steam mop without a microfibre cleaning pad attached to the floorhead. Never leave the steam mop in one spot for an extended period of time or with a damp or wet microfibre pad attached as this may damage the floor surface. Caution: this steamer is not fre...
Page 11: Using Your Machine
Using your machine caution: the steamer and accessories get very hot during use, always allow them to cool down before handling. Place foot on outer floorhead and lift steamer to release the compact scrub brush. For more concentrated steam use the steam boost. For best results use max steam + deterg...
Page 12: Using Your Machine
Using your machine important: when using on carpets, always make sure the microfibre cleaning pad covers the floorhead entirely before using the carpet glider. Only use the carpet glider when refreshing carpets. Never leave the steam mop in one spot for extended period of time or with a damp or wet ...
Page 13: Using Your Machine
Using your machine slide the rotation collar forward and rotate the 360⁰ connector to the most suited cleaning position. Using the 360 connector 1 2 3 4 precision tool ideal for hard to access areas such as corners or around taps. The concentrated jet of steam penetrates heavily soiled areas removi...
Page 14: Using Your Machine
Using your machine to produce steam squeeze the trigger in short bursts. Don’t hold the trigger continuously to prevent over wetting. Caution: always switch off the steamer and allow steamer to cool before attaching/detaching the reach wand, floorhead, accessories and twin tank. Always stand steamer...
Page 15: Using Your Machine
Using your machine the steam reach wand can be used at different heights for hard to reach places. Standing behind the unit, press the handheld release buttons and carefully release the handheld from the reach wand. Place the reach wand safely and securely to one side against a wall or fixed structu...
Page 16: Using Your Machine
Using your machine to remove the 360⁰ connector, slide the release button forward and un-twist the adaptor. Then grip the adaptor and pull it away from the handheld. Tip to re-attach the handheld to the reach wand, grip the top of the reach wand, and line-up the handheld. Push down firmly until the ...
Page 17: Taking Care of Your Machine
Taking care of your machine caution: switch off the steamer and unplug from the mains. Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks. Don’t leave water or detergent in the tanks between uses, as this can effect the steamer performance, the water/det...
Page 18: Taking Care of Your Machine
Taking care of your machine cleaning the compact scrub brush replacing the hard water filter press the reach wand release pedal and pull the reach wand and handheld out of the floorhead. Remove any dirt /debris from the brushes and wash under running water (max 40⁰c) leave to dry before re-fitting t...
Page 19: Let’S Talk Technical
Let’s talk technical caution: switch off and unplug steamer, allow to fully cool down before performing maintenance or troubleshooting checks. Clearing blockages from the handheld place the handheld on a firm surface and hold securely. Grip the large end of the de-scaling pin, insert the pin into th...
Page 20: Notes
Notes accessories.
Page 21: Accessories
Accessories 360° steam tools provide everything you need to clean a multitude of surfaces – rotating at 4 angles through 360°, they do the twisting so you don’t have to. Below is a selection of other 360° steam tools for you to enhance your steam cleaning experience. We have also put together some h...
Page 22: Accessories
Accessories accessories the window tool the window tool is perfect for cleaning glass and other mirrored surfaces. It is designed to give edge to edge steam distribution, for a more even steam clean. Use with the squeegee side first to clean and wipe away excess water, and then rotate to use the win...
Page 23: Accessories
Accessories 360° steam tools clean & scrub kit (type 1) 1-1-137101 all you need to clean and scrub at all angles. 360° steam tools provide full rotational cleaning. This kit includes: 1 x pro clean pad and 1 x microfibre pad for general cleaning, 1 x deep scrub brush, 1 x soft scrub brush and 1 x gr...
Page 24: Accessories
Accessories accessories don’t forget your accessories! Order at: www.Vax.Co.Uk/spares-and-solutions 2x mircrofibre cleaning pads (type 1) 1-1-131448-00 microfibre cleaning pads, ideal to remove dirt and grime. These cleaning pads attach to the base of the steam mop, so it’s quick and easy to fit and...
Page 25: Accessories
Accessories accessories hard water filter (type 7) 1-1-136462-00 3x hard water filters to prevent the build-up of lime scale deposits in hard water areas. Steam detergent pet 1-9-132813-00 vax pet steam detergent cuts through grease and grime, neutralises pet odours, and leaves your floors smelling ...
Page 26: What To Do If It Goes Wrong
• check the ‘this pack contains’ panel on the box to make sure the part is included with your machine. • check the on/off button has been switched to on. The red light should illuminate when on. The green light will illuminate when product is ready to steam. • the plug may not be fully pushed into t...
Page 27: Getting In Touch
Getting in touch † registration required. Terms and conditions apply, see vax.Co.Uk for details. * calls are charged at the uk local rate. Please make a note of the serial number and model number of the product before calling..
Page 28: Get In Touch
Get in touch 0330 026 8455 vaxvacuums info@vax.Co.Uk vax.Co.Uk @vaxuk eec statement of compliance: manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the s84-w7-p manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive. E...