1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. U90-P5 Series
  5. Instruction Manual

Vax U90-P5 Series Instruction Manual

Other manuals for U90-P5 Series: Instruction Manual

Summary of U90-P5 Series

  • Page 1

    Vax.Co.Uk please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference. In st ru ct io n m a n u a l bagless upright vax model number: u90-p5 series u90-p6 series warning: this cleaner has a constantly rotating brushbar which, when left...

  • Page 2

    Vax.Co.Uk 2 parts overview 1. Diagram 5 7 9 4 3 2 1 17 16 14 14 11 12 6 8 10 fig.1/1 1 handle 2 turbotool caddy 3 turbotool (some models only) 4 dirt container release 5 drt container handle 6 dirt container lid 7 filter 8 dirt container 9 carpet height adjuster 10 brush bar and brushbar windows 11 ...

  • Page 3

    3 safety information 2. Safety information for household use only when using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. Do not handle the plug or vacuum cleaner with wet hands. Do not use ou...

  • Page 4

    Vax.Co.Uk 4 assembly 3. How to assemble important: always unplug the vacuum cleaner from the electrical outlet before assembling or removing the accessories. Tool required: phillips screwdriver 1. Slide the back panel onto the base (fig.3/1). 2. To secure, insert the two (2) screws into the front of...

  • Page 5

    5 assembly 7. Clip the turbotool™ onto the front of the turbotool™ caddy (fig.3/7). 8. Wrap the hose around the back of the hose caddy. Push the hose tube down into the right side of the cleaner to secure (fig.3/8). 9. Attach the tools. Slide the dusting brush onto the post in the upper tool caddy w...

  • Page 6

    Vax.Co.Uk 6 operation 4. How to operate cord release release the power cord by turning the quick cord release. The cord should be inserted into the cord guide while vacuuming to keep it out of the way. Adjustment for different floor types rotate the height adjust lever to match the surface being cle...

  • Page 7

    7 accessories 5. Accessories important: the vacuum cleaner must be in the upright position to raise the brushbar. The brushbar height adjust must also be at its highest position. 1. Remove the hose from the tool caddy (fig.5/1). 2. Choose any of the handy on-board accessories or use the hose alone. ...

  • Page 8

    Vax.Co.Uk 8 dirt container & filter 6. Dirt container & filter: removal and replacement warning: to reduce the risk of injury from moving parts, unplug before servicing. Note: unplug the vacuum cleaner before changing filter. Note: for best performance, replace filter annually. Cleaning the central ...

  • Page 9

    7. Belt and brush: removal and replacement 1. Unplug the vacuum cleaner from the mains supply. Press the handle release button and turn the vacuum cleaner over so that the base lies flat and face up. Use a screwdriver to remove the four retaining screws shown above. Remove the nozzle guard (fig.7/1)...

  • Page 10

    Vax.Co.Uk 10 5. Remove the nozzle guard by removing the four (4) screws. Look for any obstructions and remove brushbar if necessary (fig.8/5). Clearing blockages from the turbotool (some models only) 1. Turn the turbotool over and slide off the locking ring (fig.8/6). 2. Pivot lowering housing and r...

  • Page 11

    11 9. Troubleshooting warning: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance or troubleshooting checks. Problem: vacuum cleaner won't run cause: not properly plugged into electrical outlet. Solution: plug in securely. Cause: no electricity in the elec...

  • Page 12

    Vax.Co.Uk 12 10. Uk service & help (uk) 0844 412 8455 (roi) 1-800 928 308 monday-friday 8.30am to 6.30pm saturday-sunday 9.00am to 5.00pm any queries or concerns about using your vax, call the vax careline. Please make a note of the model number and serial number of your vax before calling. For the ...

  • Page 13

    13 this page has been left intentionally blank vax careline: (uk) 0844 412 8455 (roi) 1-800 928 308 u90-p5 & u90-p6 series user guide v1.2.Qxd:ug 13/5/10 14:46 page 13.

  • Page 14

    Vax.Co.Uk 14 this page has been left intentionally blank u90-p5 & u90-p6 series user guide v1.2.Qxd:ug 13/5/10 14:46 page 14.

  • Page 15

    15 this page has been left intentionally blank vax careline: (uk) 0844 412 8455 (roi) 1-800 928 308 u90-p5 & u90-p6 series user guide v1.2.Qxd:ug 13/5/10 14:46 page 15.

  • Page 16

    --- eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the power 5 & power 6 series bagless upright vacuum cleaners are manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive emc: 2004/108/ec ...