Vax V-002 mojo II Instruction Manual - page 4
On/off Button
Plug the cord in to the electrical outlet. Turn the
vacuum cleaner on by depressing the button located
on the top left side of the vacuum cleaner (Fig.4/1).
The vacuum cleaner can be turned off by pressing the
on/off button again.
Carpet Cleaning
For carpet and rug cleaning, press the rocker switch
on the combination floor tool to raise the brushes
(Fig.4/2).
Hard Floor Cleaning
For hard floor cleaning, press the rocker switch on
the combination floor tool to lower the brushes
(Fig.4/2).
Cord Rewind
After use, turn the vacuum cleaner off and unplug from
the electrical outlet. Press the button for the cord
rewind to draw the power cord automatically (Fig.4/3).
How to Assemble/How to Operate
4
Fig.4/3
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
1.
Insert the flexible hose into the inlet on the main
body of the vacuum cleaner. Push in until it clicks
into position (Fig.3/1).
2.
Join the extension tubes together and push on to
the end of the handle (Fig.3/2).
3.
Fit the combination floor tool by pushing it on to
the extension tube (Fig.3/3).
4. How to Operate
Cord Release
Fully unwind the power cord. A yellow mark on the
power cord indicates the recommended cord length.
Do not exceed the cord length beyond the red mark.
Fig.4/1
Fig.3/1
Fig.3/2
Fig.3/3
Fig.4/2
Vax V-002 mojo D6 bf 6/21/05 2:51 PM Page 4