1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. V-008T
  5. Instruction Manual

Vax V-008T Instruction Manual

Summary of V-008T

  • Page 1

    Www.Vax.Co.Uk please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference. Vax careline 0870 6061248 in st ru ct io n m a n u a l bagless upright vax model number: v-008t vax v-008t user guide.Qxd 28/6/07 13:57 page 1.

  • Page 2

    V-008t 1. Diagram www.Vax.Co.Uk 2 parts overview 1 2 3 4 5 6 21 13 14 15 16 17 18 19 20 21 11 7 8 9 10 12 fig.1/1 1 handle grip 2 turbotool 3 hose 4 dirt container release button 5 crevice tool - inside extension tube 6 extension tube 7 dirt container 8 air directors 9 centre dirt path 10 clean rele...

  • Page 3

    3 vax careline 0870 606 1248 safety information 2. Safety information for household use only. When using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the vacuum cleaner controls be...

  • Page 4

    Www.Vax.Co.Uk 4 assembly 3. How to assemble handle assembly: tool required: phillips screwdriver detach dirt container from back panel of cleaner by pressing dirt container release button and tilting forward. Slide handle through top of back panel. Insert carry handle through holes in back panel (se...

  • Page 5

    5 vax careline 0870 606 1248 operation 4. How to operate cord release: turn quick cord release for easy cord removal. Store cord in cord grip (see page 2 - parts overview) to keep out of the way while vacuuming (fig.4/1). Turn the carpet height adjuster to match the surface being cleaned (fig.4/2). ...

  • Page 6

    Www.Vax.Co.Uk 6 operation note: rotating brush could cause area rug fringe to become tangled within cleaner. Use caution when vacuuming throw rugs with fringe.. Above floor cleaning: cleaner must be in its upright position to raise brushbar. Remove the hose from the tool caddy (fig.4/7). Choose any ...

  • Page 7

    7 vax careline 0870 606 1248 dirt container & filters 5. Dirt container & filters: removal and replacement warning: to reduce the risk of injury from moving parts, unplug before servicing. Emptying the dirt container: press dirt container release button and remove dirt container from cleaner (fig.5/...

  • Page 8

    Www.Vax.Co.Uk 8 cleaning filters wash foam filter: hold foam filter under running water to wash (fig.5/7). Ring excess water out of filter. Allow filter to dry for at least 24 hours before replacing in filter cartridge. Replace foam filter: return the foam filter to the filter cartridge (fig.5/8). R...

  • Page 9

    9 vax careline 0870 606 1248 belt or brushbar replacement pull out and wipe with a damp cloth to clean (fig.5/12). Dry and return the air directors to the dirt container. Rotate 1/4 turn clockwise to lock in place (fig.5/13). Replace dirt container: return dirt container to cleaner. Align slot on bo...

  • Page 10

    Www.Vax.Co.Uk 10 belt or brushbar replacement lift and remove brushbar (fig.6/3). Dispose of old belt. To replace belt or brushbar: slide belt onto motor shaft (see fig.6/4). Place new belt in area of brushbar without bristles (fig.6/5). With new belt in place, pull and slide brushbar into nozzle ma...

  • Page 11

    11 vax careline 0870 606 1248 general maintenance secure by aligning the three (3) tabs in the base slots. Replace all three (3) screws to secure nozzle guard (see fig.6/9). 7. General maintenance warning: to reduce the risk of injury from moving parts, unplug before servicing. Debris removal - hose...

  • Page 12

    Www.Vax.Co.Uk 12 general maintenance / troubleshooting debris removal - turbotool: rotate locking ring 180° and turn turbotool over (fig.7/3). Pivot lower housing and remove clog (fig.7/4). To reassemble, be sure tabs are engaged. Pivot the lower housing closed (fig.7/5). 8. Troubleshooting warning:...

  • Page 13

    13 vax careline 0870 606 1248 technical specification 9. Technical specification voltage: 220-240v ~50hz wattage: 1550w capacity: filters: foam and pleated hepa pre motor filters cord length: 9.8m weight: 8.98kg subject to technical change without notice. Vax v-008t user guide.Qxd 28/6/07 13:57 page...

  • Page 14

    Www.Vax.Co.Uk 14 this page has been left intentionally blank vax v-008t user guide.Qxd 28/6/07 13:57 page 14.

  • Page 15

    15 vax careline 0870 606 1248 this page has been left intentionally blank vax v-008t user guide.Qxd 28/6/07 13:57 page 15.

  • Page 16

    Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the v-008t performance twin cyclonic upright is manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive emc: 89/336/eec electromagnetic compat...