Vax careline: 0870 6061248 instruction manual please read carefully before using the steam cleaner. Always fully extend the mains cable before use. Www.Vax.Co.Uk steam cleaner vax model number: v-082 vax v-082 d7 jn 4/29/05 1:55 pm page 1.
1 steam gun with hose and connector 2 water tank empty indicator 3 steam ready indicator 4 on/off switch and indicator 5 water filler cap 6 tool holder 7 cable wind 8 2 extension tubes 9 detail nozzle 10 brushes for detail nozzle 11 carpet/floor nozzle 12 triangular nozzle 13 mirror/window tool 14 l...
3 2. Safety information for household use only. When using the steam cleaner, basic safety precautions should always be observed, including the following: 1. Do not leave the steam cleaner unattended when plugged in. Unplug it from socket when not in use. 2. To prevent electric shock do not use outd...
Note: it is advisable to use distilled water to prevent limescale deposits if your water is very hard (over 2.5mmol/l or 21˚dh). Otherwise boil the water first to extend the life of the steam cleaner. Important: do not exceed the maximum quantity of 1.1 litres when filling the tank. 3. Screw the fil...
How to operate 5 2. When the “steam ready” indicator comes on, the steam cleaner is ready to use (fig.3/4). The operating temperature is reached after approximately 8 minutes. Using the steam cleaner important: never aim the steam outlet of the steam gun at people, animals, plants or electrical syst...
How to operate/accessories 6 4. Accessories extension tubes assemble the extension tubes if the steam cleaner is to be used to clean floors or difficult to reach areas. To do this, push the open end of a tube on to the steam gun. Push it on to the steam gun until the release button of the steam gun ...
7 accessories/cleaning 2. To take the floor nozzle off again, press in the appropriate release button and pull the nozzle off with a downward movement. Triangular nozzle 1. Attach the triangular nozzle to the end of the extension tube. Ensure that the nozzle clicks into place on assembly. The triang...
8 storage 6. Storage 1. Switch the steam cleaner off. Press the steam button on the steam gun to release the remaining pressure. 2. Remove the mains plug from the socket and allow the steam cleaner to cool down. Empty the water tank so that no deposits can settle (fig.6/1). 3. The steam cleaner must...
9 troubleshooting/uk service & help/technical specification 7. Troubleshooting warning: to reduce risk of personal injury - unplug steam cleaner before servicing problem: operating pilot lamp fails to light. Cause: the steam cleaner is not plugged into a socket or is not switched on. Solution: inser...
10 this page has been left intentionally blank. Vax v-082 d7 jn 4/29/05 1:55 pm page 10
11 this page has been left intentionally blank. Vax v-082 d7 jn 4/29/05 1:55 pm page 11.
Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the product v-082 steam cleaner is manufactured in compliance with the following: safety: 73/23/eec low voltage directive, as modified by 93/68/eec emc: 89/336/eec electromagnetic compa...
