Vax V-303 Wash "N' Dry Instruction Manual

Summary of V-303 Wash "N' Dry

  • Page 1

    Vaxcare: aust: 1300 36 4040 nz: 0800 800 900 www.Vax.Com.Au instruction manual please read carefully before using this cleaner. Retain for future reference. Always fully unwind the mains cable before use. If you require any further assistance or advice about any vax please call vaxcare on 1300 36 40...

  • Page 2

    2 11 1. Safety instructions for household use only when using the cleaner, basic safety precautions should always be observed, including the following: 1. Do not leave the machine unattended when plugged in. Unplug it from socket when not in use. 2. To prevent injury do not use outdoors. 3. Not to b...

  • Page 3

    Fig.8/3 3 10 4 3 9 2 1 14 12 13 10 11 fig.1/1 1 water pump button (green) 2 power button (red) 3 carry handle 4 power cord 5 container release clips 6 casters 7 suction hose connection port 8 solution tube port 9 exhaust filter 10 hose 11 solution tube 12 suction hose connector 13 solution tube to m...

  • Page 4

    Fig.8/1 fig.8/2 a a a fig.3/4 fig.3/5 fig.3/6 fig.3/1 fig.3/2 fig.3/3 3. Vacuuming important: always remove the power plug from the wall outlet before assembling, servicing or removing accessories. Important: only the red power button should be “on” when the machine is in dry vacuuming mode. The gre...

  • Page 5

    Fig.3/10 fig.3/11 fig.3/12 fit the dust bag by aligning the front of the dust bag with the inlet slots, and position the dust bag to fill the inside of the base (fig.3/7). 8 5 fig.3/7 fig.3/8 fig.3/9 replace the motor top, ensuring that the dust bag is not trapped. Ensure the motor top is secured to...

  • Page 6

    6. Getting ready to wash 1. Unclip container release clips (a) on both sides of machine (fig.6/1). 2. Lift off motor container and remove filter assembly. Remove the plug from the solution intake port and replace the solution connector tube. The machine can be used for washing by placing the clean w...