Commercial vcc-08 vcc-08 user guide performance is everything. Get cleaning... What’s your vax’s model number? What’s your serial number? (located on the base of the machine) note these down in case you need them in future. Please keep instructions for further use. V c c – 0 8.
General safety information 2 vax service line: au: 1300 361 505 nz: 0800 800 900 for commercial use only. When using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the vacuum cleaner...
Machine overview 3 1 extension tubes 2 crevice tool 3 dusting brush 4 tool storage clip 5 lid retaining clips 6 combination fl oor tool 7 rear wheels 8 tool parking slot 9 rear cord hook 10 eco power switch 11 kettle connection power cord 12 post motor exhaust 13 on/off switch 14 360° rotating casto...
Operation 4 unclip the locking clips and remove lid. Assembling your vacuum cleaner warning: always switch off and unplug your vacuum cleaner from the electrical socket before carrying, opening, emptying or conducting maintenance or troubleshooting checks on the machine. Always switch off and unplug y...
Operation 5 push together the two metal extension tubes and attach the hose and fl oor head. Connect the dusting brush to the handle or tube to clean delicate surfaces such as window sills and desks. Connect the crevice tool to the handle or tube for cleaning edges and diffi cult to reach areas. To cle...
Operation 6 press eco button to move between high/low power modes. To store, hook the fl oor head into the parking slot. Form a loop in the cable and slide into retaining clip. Attach the power cord to the vacuum canister. After use, loop power cord in hand and store on rear hook. Pull down to secure...
Maintenance 7 raise the locking clips and lift lid. For a deeper clean remove the fi lter and use the dusting brush to clean both sides. Cleaning the hepa cloth pre-motor fi lter: quick clean cleaning the hepa cloth pre-motor fi lter: deep clean warning: always switch off and unplug your vacuum clean...
Maintenance 8 remove the pre-motor fi lter. Rinse under cold water. Leave to fully dry in natural sunlight. Cleaning the foam pre-motor fi lter filter replacement to maintain optimum performance check fi lters whenever you replace the dust bag. Replace the fi lters if they become damaged or discolou...
Faqs 9 is there an accessory missing? • check the ‘machine overview’ (page 3) to make sure the part is definitely included in your unit. • if it is missing, we’re here to help. Simply call us on au: 1300 361 505 nz: 0800 800 900 why will the vacuum cleaner not run? • it may not be plugged into the e...
Other information 10 service & help vax careline: australia 1300 361 505 new zealand 0800 800 900 monday-friday 8.30am to 5.00pm any queries or concerns about using your vax, call the vax commercial careline. Calls are charged at the standard local rate. Please make a note of the serial number and m...
Notes 11 vax.Com.Au.
Commercial distributed by techtronic industries pty. Ltd. Level 1, 660 doncaster road, doncaster, australia 3108. Www.Vax.Com.Au service line: au: 1300 361 505 / nz: 0800 800 900 performance is everything..
