Vax VCWRS700 User manual - page 8
---
Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
8
FAQs
FAQs
vax.co.uk
11
!
WARNING: To reduce the risk of personal injury, unplug the carpet washer
before performing maintenance/troubleshooting checks.
W90-RU & W89-RU Series User Guide v1.3.qxd:User guide 1/2/11 12:41 Page 11
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in firmly.
Cause:
No electricity in electrical outlet.
Solution: Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution: Push on/off switch to ‘on’.
Cause:
Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
Cause:
Dirty water tank is full.
Solution: Switch off and unplug cleaner. Empty dirty water tank as shown on page 6.
Cause:
Dirty water tank not installed correctly.
Solution: Refer to page 6 for fitting information.
Cause:
Obstruction in hose/nozzle.
Solution: Remove hose and clear obstruction.
Cause:
Dirty water tank is full.
Solution: Switch off and unplug cleaner. Empty dirty water tank as shown on page 6.
Cause:
Dirty water tank not installed correctly.
Solution: Refer to page 6 for fitting information.
Cause:
Solution tank not installed correctly.
Solution: Make sure the tank is securely locked in place
Cause:
Solution tank not installed correctly.
Solution: Make sure the tank is securely locked in place.
Cause:
Solution tank empty.
Solution: Refill tank. Refer to page 4/5 for instructions.
Cause:
Handle not fitted correctly.
Solution: Ensure handle is fitted correctly.
PROBLEM: The cleaner won’t run.
PROBLEM: Cleaner won’t pick up/loss of suction.
PROBLEM: Liquid escaping from the carpet washer.
PROBLEM: Clean solution won’t dispense.