Vax VRS203 User Manual - Getting Started

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

*

To purchase consumables and accessories, please visit 

vax.co.uk

Getting started

Before you begin cleaning

•  Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,  

or removing and emptying the dirt container.

•  The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the 

thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug 

from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the 

vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters  

to fully dry before putting back into the vacuum machine). 

•  Clean the pre-motor filter every time the dirt container is emptied and replace the post-motor filter every 12 months.

•  If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.

Assembling your cylinder

Insert the end of the hose 

into the unit. Ensure the 

hose has clicked into place.

Slot the metal telescopic extension 

tube and hose handle together. All 

accessories can be fitted to the end 

of the metal telescopic extension tube.    

Fully unwind the power 

cord. A yellow mark on 

the cord indicates the 

recommended cord length. 

Do not exceed the cord 

beyond the yellow mark.

Plug in and switch the 

unit on by pressing the 

power button.

When unwinding the power 

cord always pull out to 

the yellow marker but 

no further.

CAUTION