Performance is everything. Vax.Co.Uk designed in the uk user guide vrs23u series vrs23ub.
Contents 1 2 3 4 5 6 7 8 9 contents machine overview general safety information getting started how to use looking after your machine — filters and dirt container looking after your machine — filters looking after your machine — removing blockages looking after your machine — brushbar faqs other inf...
Machine overview note: some parts may vary according to model. Please check inside flap of box for more details. 2 vax.Co.Uk handle telescopic extension tube dirt container release button power on/off button separator dirt container post-motor filter cover hose to machine connector carpet height adj...
This vacuum cleaner is intended for household use only and not for commercial or industrial use. Please keep instructions for further use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces...
Getting started insert the backbone into the floorhead. Insert the cord holder into the hole at the bottom of the product backbone. Please read safety information before use (p3) assembling your upright before plugging the cord into the electrical outlet, make sure the switch is in the ‘off’ positio...
Vax.Co.Uk 5 how to use using accessories note: please select the hard floor setting on the brushbar height adjustment dial when using on hard floor, vinyl or lino to ensure the brushbar is in the highest position to avoid damaging your floor. Note: this unit has a constantly rotating brushbar. Vax r...
6 vax.Co.Uk looking after your machine – filters and dirt container cleaning the pre-motor filter turn the dirt container lid anti-clockwise to remove. Emptying and cleaning the dirt container note: wash filters with warm water (40°c max) at least every 3 months for best cleaning results. For detail...
Vax.Co.Uk 7 looking after your machine – filters cleaning the shroud tap turn the dirt container lid anti-clockwise to remove. 4 24hr max 40˚c remove the pre-motor filter to allow access to the shroud. Tap the shroud over a bin to release dirt. Wash the shroud under running water and leave to dry. M...
8 vax.Co.Uk looking after your machine – removing blockages removing debris from the brushbar removing blockages from the turbotool important: if the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. 3 1 swi...
Vax.Co.Uk 9 looking after your machine – brushbar faqs changing the belt switch off your vacuum cleaner at the main socket and unplug. Unclip the 2 small wheels from the base of the vacuum to enable you to remove the screws from behind. Note: the screw for the height adjuster dial is located here. R...
10 vax.Co.Uk faqs warning: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Is there an accessory missing? • check the ‘getting started’ page in this guide or the box that the machine came in to make sure that the part is definite...
Vax.Co.Uk 11 uk service & help any queries or concerns about using your vax, simply visit; vax.Co.Uk/support – vaxireland.Ie or call the vax careline. Calls are charged at the uk local rate. Please have your machine with you when calling. Vax careline: (uk) 0844 412 8455 (roi) 1-800 928 308 monday-f...
12 vax.Co.Uk free 2 year guarantee instead of taking me back to the shop, simply visit: vax.Co.Uk/support or call (uk) 0844 412 8455 (roi) 1-800 928 308 let us know what you think @vaxuk we’re here if you need us uk based customer care centre — open 6 days a week monday-friday 8:30am-6:30pm saturday...
Machine overview vax.Co.Uk 13 notes.
Guarantee 14 vax.Co.Uk notes.
Commercial vax ltd., kingswood road, hampton lovett, droitwich, worcestershire, wr9 0qh, uk email: info@vax.Co.Uk website: vax.Co.Uk performance is everything. Vax.Co.Uk.