Vax VSTDUET1600 User manual - page 8
Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
7
Operation
Steam cleaning hard floors
Plug into mains, press on
button on the main body.
A blue light shows unit is
on and heating. Wait until
green light appears (within
1 minute).
To recline the unit place
foot on floor head and
tilt handle.
To produce steam squeeze
the trigger in short bursts.
To prevent overly wetting
floors, do not hold down
continuously.
Move the steam mop
slowly backwards and
forwards across the floor
paying particular attention
to high traffic areas.
IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steam mop on
a discrete area of flooring to begin with.
WARNING: Never leave the stick steam mop in one spot on any surface for an extended period of time with a
damp or wet microfibre cleaning pad attached as this may damage the floor surface. Your stick steam mop
should only be used on tiles, lino, sealed wood flooring including sealed laminate.
WARNING: Do not operate/use stick steam mop without water in clean water tank.
IMPORTANT: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
IMPORTANT: When using on hard floors, always ensure the microfibre cleaning pad is properly attached to the
floor head.
IMPORTANT: For 1 x 400ml water tank = 12 minutes steaming time (approx).