Instruction manual bagless cylinder vacuum cleaner vax vx2 www.Vax.Co.Uk vax careline: 0870 6061248 please read carefully before using the cleaner. Always fully extend the mains cable before use. 2548 vx 2/5 u/g diags 16/12/05 1:49 pm page 1.
2 parts overview 1 carry handle 2 dirt container release latch 3 cord rewind button 4 pre-filter cassette release button 5 on/off switch 6 exhaust filter/wheel 7 combination upholstery tool/dusting brush 8 turbotool tm 9 dirt container 10 infra-red control/power indicator 11 turbobrush 12 extending ...
3 parts overview 15 crevice tool 16 hard floor tool 7 combination upholstery tool/dusting brush 8 turbotool tm 17 remote on/off button 18 telescopic tube 19 battery cover (2x aaa batteries supplied) 17 19 18 15 16 7 8 a ac cc ce es ss so orriie es s fig.1/2 fig.1/3 2548 vx 2/5 u/g diags 16/12/05 1:4...
4 2. Safety information for household use only when using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the vacuum cleaner controls before connecting to or disconnecting from the ma...
5 2. Fit the telescopic tubes to the hand grip by pushing the tubes into the hand grip (fig.3/2). 3. Extend the telescopic tubes by sliding the collar in the direction of the ridged arrows and pull the inner tube downwards. 4. Fit the turbobrush on to the telescopic tubes by pushing the tubes into t...
6 use & function / accessories/ emptying the dirt container carrying the vacuum cleaner note: ensure the dirt container is securely in place before lifting the vacuum cleaner. The vacuum cleaner can be stood in an upright position for carrying and storage. On the underside of the cleaner is a hook w...
7 filters / maintenance 6. Maintenance changing or cleaning the pre-motor filter 1. Switch the vacuum cleaner off and disconnect the power plug from the wall outlet. 2. Remove dirt container. 3. Remove the pre-motor filter from its position as shown (fig.6/1). 4. Lift the cover off the cassette by t...
8 clearing blockages from the turbobrush 1. Switch the vacuum cleaner off and disconnect the power plug from the wall outlet. 2. To remove a blockage from the turbobrush, lift the two catches on either side of the turbobrush (fig.7/4) and lift the top cover. 3. Clear the blockage, return the top cov...
9 troubleshooting 8. Troubleshooting problem: vacuum cleaner won't run cause: power cord not firmly pushed into mains socket, or socket switch is off. Solution: plug the cord in firmly to the power outlet and turn socket on. Cause: blown fuse or tripped circuit breaker. Solution: check fuse/breaker....
10 9. Uk service & help vax care 0870 6061248 monday-friday. 9.00am to 5.00pm. An answerphone is available out of these hours. Any queries or concerns about using the vax, call the vax careline. Calls are charged at the uk national rate. Please make a note of the serial number and model number of th...
11 2548 vx 2/5 u/g diags 16/12/05 1:49 pm page 11.
Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the product vx2 is manufactured in compliance with the following: safety: 73/23/eec low voltage directive, as modified by 93/68/eec e em mc c:: 89/336/eec electromagnetic compatibility ...
