Vax VZL-401CSP Instruction Manual

Summary of VZL-401CSP

  • Page 1

    Www.Vax.Co.Uk please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference. Vax careline 0870 6061248 in st ru ct io n m a n u a l bagless upright vax model number: vzl-401csp warning: this cleaner has a constantly rotating brush bar wh...

  • Page 2

    1. Diagram www.Vax.Co.Uk 2 parts overview 1 handle grip 2 handle 3 turbotool 4 carry handle 5 pre-motor filter assembly (located behind dirt container) 6 post-motor filter assembly (located under dirt container) 7 dirt container release button 8 dirt container 9 central dust chamber 10 bin release e...

  • Page 3

    3 vax careline 0870 606 1248 safety information 2. Safety information for household use only when using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the vacuum cleaner controls bef...

  • Page 4

    Www.Vax.Co.Uk 4 how to assemble / how to operate 3. How to assemble handle assembly slide handle piece into slot in the back of the unit. Insert screws into holes indicated (fig.3/1). Tool storage attach tools: (a) clip the dusting brush into the holster at the side of the cleaner with bristles faci...

  • Page 5

    5 vax careline 0870 606 1248 how to operate floor/carpet cleaning move the handle and adjust it to the desired position for (a) storing the upright, (b) operating the cleaner, and (c) de-press the handle release pedal again to clean under furniture. Note: brushbar could cause rug fringe area to beco...

  • Page 6

    Www.Vax.Co.Uk 6 dirt container and filter 5. Dirt container & filter: removal & replacement warning: to reduce risk of injury from moving parts - unplug before servicing. Press dirt container release button and remove dirt container from cleaner (fig.5/1). Hold dirt container inside rubbish bin (fig...

  • Page 7

    7 vax careline 0870 606 1248 dirt container and filter remove exhaust filter press tab on front of exhaust cover and lift to remove. Press tab on exhaust filter and lift filter out of base of cleaner (fig.5/8). Clean exhaust filter tap the exhaust filter on the inside of a rubbish bin to remove exce...

  • Page 8

    Www.Vax.Co.Uk 8 belt or brush bar 6. Belt or brushbar: removal and replacement tool required: phillips screwdriver warning: to reduce the risk of injury from moving parts - unplug cleaner before changing belt or brush. To remove belt lay cleaner flat and flip cleaner to expose nozzle base (fig.6/1)....

  • Page 9

    9 vax careline 0870 606 1248 belt or brush bar / lightbulb removal and replacement 8. General maintenance warning: to reduce risk of injury from moving parts - unplug before servicing. Debris removal/nozzle guard • check to see if dirt container is full; empty if needed. • plug cleaner in and check ...

  • Page 10

    Www.Vax.Co.Uk 10 general maintenance / troubleshooting pivot lower housing and remove clog (fig.8/4). To reassemble, be sure tabs are engaged. Pivot the lower housing closed (fig.8/5). Rotate locking ring back round to secure. 9. Troubleshooting warning: to reduce risk of personal injury, unplug vac...

  • Page 11

    11 vax careline 0870 606 1248 service & help / technical specification 10. Uk service & help vax care 0870 6061248 monday-friday 8.00am to 8.00pm. Saturday-sunday 9.00am to 5.00pm. Any queries or concerns about using the vax, call the vax careline. Calls are charged at the uk national rate. Please m...

  • Page 12

    Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the vzl-401csp force 10 cyclonic upright is manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive emc: 2004/108/ec electromagnetic compatibi...