1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. VZL-6015
  5. Instruction manual

Vax VZL-6015 Instruction manual

Manual is about: Bagless upright 5 1 8 7 9 11 10 15 14 12 13 17 18 19 20 21 25 22 23 24 21 16 6 4 3 Bagless upright

Summary of VZL-6015

  • Page 1

    Www.Vax.Co.Uk please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference. Vax careline 0870 6061248 bagless upright 5 1 8 7 9 11 10 15 14 12 13 17 18 19 20 21 25 22 23 24 21 16 6 4 3 2 26 27 ! ! Vax model number: vzl-6015 vzl-6016 vzl...

  • Page 2

    1. Diagram 1 on/off switch ensure that the plug is inserted securely into the electrical outlet before pressing the on/off switch. 2 soft touch handle grip 3 telescopic handle 4 handle adjustment button 5 carrying handle 6 dirt container release button located at the front of the unit, the dirt cont...

  • Page 3

    3 vax careline 0870 606 1248 safety information 2. Safety information for household use only when using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the vacuum cleaner controls bef...

  • Page 4

    Www.Vax.Co.Uk 4 assembly 3. How to assemble attach upper housing remove dirt cup (a) from upper housing (b) by pressing dirt cup release button (c) and pivoting cup out. Set dirt cup aside (fig.3/1). Using a phillips screwdriver, remove (3) screws from cleaner base. Do not dispose of screws. Remove ...

  • Page 5

    5 vax careline 0870 606 1248 assembly position hose over rack (a) and into hose tube (b) (fig.3/8). Note: hose must be connected at the hose tube and at the dirt duct on the back of the cleaner for carpet or floor cleaning. For tool use, refer to next chapter. Attach handle note: do not remove orang...

  • Page 6

    Www.Vax.Co.Uk 6 assembly / operation position tools place smaller diameter end of extension tube (a) into bottom of rack. Snap extension tube into clip at top. Repeat with other extension tube. Crevice tool (b) fits into one of the extension tubes. Fit combination tool (c) and turbotool (d) into sto...

  • Page 7

    7 vax careline 0870 606 1248 operation telescopic handle the telescoping handle includes adjustable settings to various heights for user comfort. The handle is designed to retract into the body of the cleaner for convenience in storing or carrying the cleaner. Lower the handle by depressing the butt...

  • Page 8

    Www.Vax.Co.Uk 8 operation settings for maximum cleaning performance, the following carpet height settings are recommended (fig.4/9): note: if the cleaner is difficult to push, turn knob to the next higher setting. • higher settings: for very deep pile carpet, where easier pushing effort is desired, ...

  • Page 9

    9 vax careline 0870 606 1248 operation align end of hose with projections (a) over slots (b) on extra reach hose. Slide hose into slots and twist hose to lock it into place. (to detach hose, reverse procedure) (fig.4/15). Attach extension tubes or tools to the other end of hose. Note: hose must be c...

  • Page 10

    Www.Vax.Co.Uk 10 dirt container and filters 5. Dirt container & filters: removal & replacement note: familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. Emptying the dirt container empty the dirt cup before the d...

  • Page 11

    11 vax careline 0870 606 1248 dirt container and filters remove dirt container as described above. Twist filter assembly counterclockwise. Remove assembly from dirt container (fig.5/6). Dirt and debris can be cleaned from the filter assembly by brushing with the cleaner’s combination tool. Place the...

  • Page 12

    Www.Vax.Co.Uk 12 maintenance 6. Maintenance replacing the headlight removing lens disconnect cleaner from electrical outlet. Press handle release pedal and place handle in low position. Using a phillips screwdriver, remove the the screw as shown and lift off lens (fig.6/1). Pull old bulb straight ou...

  • Page 13

    13 vax careline 0870 606 1248 maintenance turn brushbar making sure belt turns freely and is not pinched between a brushbar and shield (fig.6/7). Reposition bottom plate and 6 phillips head screws (as fig.6/3). Tighten screws securely. Replacing the brushbar when brushbar brushes are worn, the brush...

  • Page 14

    Www.Vax.Co.Uk 14 maintenance grasp brushbar firmly and fit it into position by first sliding end opposite the belt into the rectangular slot (a) on side of cleaner. Pull other side of brushbar (b) into place (fig.6/12). Belt may fit loosely when properly installed. Reposition flat belt and bottom pl...

  • Page 15

    15 vax careline 0870 606 1248 maintenance replace and tighten screws. To replace bottom plate, insert the four tabs on edge of bottom plate into slots on front of tool. Pivot bottom plate down and snap closed (fig.6/18). Turbotool belt replacement the turbotool belt is designed to last a long time a...

  • Page 16

    Www.Vax.Co.Uk 16 clearing blockages 7. Clearing blockages important: disconnect cleaner from electrical outlet before attempting to clear blockages. Low suction or pick up may be due to a blockage in the system. Refer to the following steps to check for blockages continuing with each step until the ...

  • Page 17

    17 vax careline 0870 606 1248 troubleshooting / uk service & help 8. Troubleshooting warning: to reduce the risk of personal injury, unplug vacuum cleaner before servicing. Problem: cleaner won’t run cause: not properly plugged into wall outlet. Solution: plug in firmly. Cause: no electricity in wal...

  • Page 18

    Www.Vax.Co.Uk 18 technical specification 10. Technical specification voltage: 220 – 240v ~50hz wattage: 1500w capacity: 2.6l filters: washable pre-motor filter assembly hepa post-motor assembly cord length: 8.3m weight: 10.68kg subject to technical change without notice..

  • Page 19

    19 vax careline 0870 606 1248 this page has been left intentionally blank..

  • Page 20

    Eec statement of compliance manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the vzl-6015 mach 5 range and vzl-6016 mach 6 range upright vacuum cleaners are manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive emc: 2...