Vax W85-DP-E series User Manual

Manual is about: Dual power

Summary of W85-DP-E series

  • Page 1

    Vax.Co.Uk dual power let’s get started w86-dp-b/a/r/t/p/w85-dp-e series.

  • Page 2: Let’S Talk Safety

    Let’s talk safety basic safety precautions don’ts do’s this carpet washer is intended for household use only and not for commercial or industrial use. • this carpet washer is intended for household use only and not for commercial or industrial use. • only use the carpet washer indoors and keep the a...

  • Page 3: As Instructed In This Guide.

    Capabilities, unless they have been given instructions on how to use the machine or are supervised during use. • any cleaning or maintenance of your carpet washer should not be made by children without supervision and ensure they don’t play with the carpet washer. • before using your carpet washer t...

  • Page 4: @vaxuk

    Thank you for buying this dual power. Taking care of your carpets the dual power is designed to make washing carpets regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets will ensure they keep their appearance f...

  • Page 5: Contents

    Contents let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical accessories notes what to do if it goes wrong getting in touch vax cleaning solution vax pet solution accessory bag long reach hose 1 x vax pet solution pre tre...

  • Page 6: Technical Specification

    Getting to know your machine on/off pedal power cable name dual power code w85-dp-e, w86-dp-b, w86-dp-a, w86-dp-r, w86-dp-p, w86-dp-t voltage see rating label on machine for details wattage see rating label on machine for details cord length 8m weight 5.8-6.6kg technical specification subject to tec...

  • Page 7: Getting Started

    Stand base in upright position and lower top section to connect onto base. Slide handle down onto unit. Assemble the two lower handle screws and tighten with a cross/flat head screwdriver. Assembling your carpet washer assemble the upper handle screw and tighten with a cross/flat head screwdriver. G...

  • Page 8: Using Your Machine

    Using your machine before you begin cleaning • important: carpets should be dry vacuumed thoroughly before washing. • test for colourfastness – wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/upholstery gently rub with the dampened cloth. Wait ten minutes an...

  • Page 9: Using Your Machine

    Using your machine turn the machine on. Recline the machine. Press trigger to release solution. For best results apply solution on the forward stroke and release the trigger to recover solution on the backward stroke. 40c max fill clean water tank with solution mix. Tighten cap before returning tank...

  • Page 10: Using Your Machine

    Using your machine 40c max fill clean water tank with solution mix. Tighten cap before returning tank to unit. Unwrap power cord and plug unit in. Mix required amount of pre treatment solution with warm water (40ml per 1 litre of water) operating your pre treatment wand (dual power total home only) ...

  • Page 11: Using Your Machine

    Remove the long reach hose from the accessory bag. Lift hose connector door and plug the long reach hose into the front of the cleaner. Plug the solution tube, from the long reach hose, into the solution port. Twist lock to secure. Using your machine turn the machine on. Press trigger to release sol...

  • Page 12: Taking Care of Your Machine

    Taking care of your machine taking care of your machine for large spills use the carpet washer turn the machine on. Recline the machine. For best results use straight parallel strokes. Always switch off and unplug the carpet washer from the electrical outlet before assembling, filling and emptying t...

  • Page 13: Taking Care of Your Machine

    Taking care of your machine storage tip important: empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution stored in the tanks between uses. During normal use of cleaning, debris may accumulate inside the dirty water tank. In order to keep your un...

  • Page 14: Let’S Talk Technical

    Let’s talk technical removing blockages from the brushbar replacing the belt or brushbars threads caught in the brushbar can be cut. Caution: do not open the motor cover. Use a crosshead screwdriver to remove the seven screws. For dual power reach/total home/ pet plus models remove the eight screws....

  • Page 15: Accessories

    Accessories don’t forget your accessories! Order at: www.Vax.Co.Uk/spares-and-solutions ultra+ pet carpet cleaning solution (1.5l) 1-9-132707-00 ultra+ pet carpet cleaning solution tackles stubborn spots and stains and removes unpleasant pet odours too. It’s specially formulated to leave no sticky r...

  • Page 16: Notes

    Notes notes.

  • Page 17: Notes

    Notes notes.

  • Page 18: Getting In Touch

    Getting in touch caution: always switch off and unplug the carpet washer from the electrical outlet before assembling, filling and emptying the clean water tank, emptying the dirt water tank, or before connecting/disconnecting the attachments. Caution: the carpet washer is a very powerful unit. Befo...

  • Page 19: Getting In Touch

    Getting in touch * calls are charged at the uk local rate. Please make a note of the serial number and model number of the product before calling. † registration required. Terms and conditions apply, see vax.Co.Uk for details. What to do if it goes wrong.

  • Page 20: @vaxuk

    Eec statement of compliance: manufacturer/eec importer: vax limited, hereby on our own responsibility, declare that the w85-dp/w86-dp series is manufactured in compliance with the following directives: safety: 2006/95/ec low voltage directive. Emc: 2004/108/ec electromagnetic compatibility directive...