User guide performance is everything. Vax.Co.Uk w87-dv series designed in the uk dual v advance.
Contents machine overview general safety information getting started how to use looking after your machine faqs other information guarantee contents 1 2 3 4 5 13 18 17 16 vax.Co.Uk 1.
Machine overview handle grip trigger (hidden) spinscrub caddy spinscrub hand tool on/off switch wash/rinse/max extract switch clean water tank release button carry handle clean water tank dirty water tank carry handle dirty water tank hose connection port solution tube connector port nozzle edge cle...
This carpet washer is intended for household use only and not for commercial or industrial use. Please keep instructions for further use. When using the carpet washer, basic safety precautions should always be observed, including the following: general safety information 1. Do not leave the carpet w...
Getting started place handle on machine. Please read the safety information before use (p3) assembling your carpet washer handle and spinscrub wash tool turn the dial clockwise to secure the handle. Place spinscrub tool in caddy. Assembling your tool caddy and hose attach top caddy section to unit. ...
Vax.Co.Uk 5 how to use before you begin cleaning do not saturate your carpet. • test for colourfastness – wet a white absorbent cloth with the solution. In a small, hidden area of your carpet and upholstery, gently rub the surface with the dampened cloth. Wait ten minutes and check for colour remova...
6 vax.Co.Uk operating your carpet washer how to use wash: spinscrub brushes deep clean your carpets with water and solution to remove dirt and stains. Rinse: only water is released to help remove solution residue. Max extract: no water/solution mix is released onto your carpets (even when trigger is...
Vax.Co.Uk 7 how to use unwrap power cord and plug unit in. Press trigger to release solution. Turn the machine on. For best results apply solution on the forward stroke and release the trigger to recover solution on the backward stroke. To avoid saturating your carpet, do not use more than 4 wet str...
8 vax.Co.Uk how to use unwrap power cord and plug unit in. Place hard floor squeegee onto nozzle base by attaching it to the front section first. Then, click the back section into place. Fill the clean water and solution tank with hard floor solution as specified on pages 5 and 6 press trigger to re...
Vax.Co.Uk 9 how to use press trigger to release water. For best results apply water on the forward stroke and release the trigger to recover water on the backward stroke. To avoid saturating your carpet or hard floor, do not use more than 4 wet strokes over one area. Always end with dry strokes. Tur...
10 vax.Co.Uk how to use turn the machine on. Recline the machine. For superior drying performance use in combination with the max extract pedal. The brushes will not rotate when the max extract pedal is pressed, and the pedal will remain down when in use. For best results use straight parallel strok...
Vax.Co.Uk 7 vax.Co.Uk 11 how to use picking up spills for small spills, use the upholstery wash tool provided. Remove hose. Place hose into hose connection port and turn clockwise to secure. Turn the machine on. Pull wash tool back over spill to pick up liquid. Turn the machine on. Recline the machi...
8 vax.Co.Uk how to use 12 vax.Co.Uk using the spinscrub and upholstery wash tool remove hose. Align solution tube with connector port. Push in and turn clockwise to secure. For best results apply solution on the forward stroke and release the trigger to recover on the backward stroke. The spinscrub ...
Vax.Co.Uk 713 looking after your machine warning: always switch off and unplug the carpet washer from the electrical outlet before assembling, filling and emptying the clean water tank, emptying the dirty water tank, or before connecting / disconnecting the attachments. Emptying the dirty water tank...
8 vax.Co.Uk looking after your machine 14 cleaning the nozzle if lint or other debris becomes lodged in nozzle, it can be removed for cleaning. To replace nozzle, line up tabs on nozzle with holes in cleaner. Slide tabs into holes. Press down on nozzle to secure. Not fitting the nozzle correctly wil...
Machine overview vax.Co.Uk 15 looking after your machine warning: to reduce the risk of electric shock, turn the machine off and unplug from electrical socket before performing maintenance/troubleshooting checks. Removing blockages from the brushes advanced brush maintenance place the machine flat. ...
Guarantee faqs 16 vax.Co.Uk is there an accessory missing? •checkthe‘thispackcontains’panelontheboxtomakesurethepartisdefinitelyincludedinyourunit why won’t the carpet washer turn on? •itmaynotbepluggedintotheelectricalsocketcorrectly:ensurethattheplugispushedinsecurelyandswitchedon •thepowerbuttono...
Machine overview vax.Co.Uk 17 other information uk service & help any queries or concerns about using your vax, simply visit; vax.Co.Uk/support – vaxireland.Ie or call the vax careline. Calls are charged at the uk local rate. Please make a note of the serial number and model number of the vacuum cle...
Guarantee guarantee 18 vax.Co.Uk free 6 year guarantee instead of taking me back to the shop, simply visit: vax.Co.Uk/support or call (uk) 0844 412 8455 (roi) 1-800 928 308 let us know what you think @vaxuk we’re here if you need us uk based customer care centre — open 6 days a week monday-friday: 8...
Vax ltd., kingswood road, hampton lovett, droitwich, worcestershire, wr9 0qh, uk email: info@vax.Co.Uk website: vax.Co.Uk performance is everything. Version 1.0
