1. DL manuals
  2. VBC Racing
  3. Toy
  4. FFTwelve
  5. Instruction Manual

VBC Racing FFTwelve Instruction Manual

Summary of FFTwelve

  • Page 1

    Competition grade high performance radio control racing car chassis kit e instructions manual 5 thank you for purchasing vbc racing product. This vbc racing kit is a high performance, racing grade car kit intended for experienced racers. The kit compose of vbc formulated composite materials, top qua...

  • Page 2: Step1

    Bag marked step1 1 graphite edges protection procedure 01 © vbc racing fftwelve ca sand the chassis edges with #600 sand paper(not included) and apply ca glue(not included) to the edges of the chassis. Sand the below graphite edges with #600 sand paper and apply ca glue to the edges. A-01-vbc-2004-3...

  • Page 3: Step2

    Bag marked step2 2 gear differential assembly gear diff housing a-03-vbc-2005 x 1 gear diff pulley 39t a-03-vbc-2006 x 1 diff gear 18t a-03-vbc-0019 x 2 lightweight hardened gear diff cup b-02-vbc-0099 x 2 10x15 ball bearing c-02-bb-1510-b x 2 m2x10 shaft pin b-02-vbc-0020 x 2 15x0.3 shim b-02-vbc-0...

  • Page 4: Step2

    2 gear diff assembly continue diff gear 10t a-03-vbc-0018 x 4 m2.6x10 flathead screw c-02-sc-f2.6x10 x 4 seal gasket b-03-vbc-0004 x 1 03 © vbc racing fftwelve 9.5x0.2mm shim b-02-vbc-0078 x 4 step2 diff gear shaft a-03-vbc-0020 x 1 diff housing sealer o-ring b-03-vbc-0005 x 1 bag marked fill with s...

  • Page 5: Step3-4

    3 rear bulkhead and center suspension mount assembly 04 © vbc racing fftwelve fftwelve lower bulkhead (a) b-02-vbc-2007 x 2 fftwelve lower bulkhead (b) b-02-vbc-2008 x 2 center suspension mount x 2 b-02-vbc-0062 center suspension mount shim (1mm) x 4 a-01-vbc-0038 m3x6 flathead c-02-sc-f0306 x 16 ba...

  • Page 6: Step5-6

    5 steering system assembly 05 © vbc racing fftwelve steering assembly travel plate b-02-vbc-2009 x 1 steering travel arm b-02-vbc-0053 x 2 bag marked step5-6 steering assembly pole b-02-vbc-2010 x 2 ball connector b-02-vbc-0045 x 3 steering cone washer b-02-vbc-0089 x 2 t2 7075 spacer b-02-vbc-0019-...

  • Page 7: Step7-8

    7 transmission assembly 06 © vbc racing fftwelve fftwelve front gear box (a) b-02-vbc-2023 x 1 bag marked step7-8 ball connector b-02-vbc-0045 x 2 m3x8 roundhead c-02-sc-r0308 x 1 m3x10 set screw c-02-sc-ss-0310 x 2 ff12 front gear box b ff12 front gear box a ball connector ball connector m3x10set s...

  • Page 8: Step7-8

    8 front damper stay assembly 07 © vbc racing fftwelve bag marked m3x8mm flathead screw m3x8mm roundhead screw bearing o-ring install o-ring onto groove m3x8 flathead c-02-sc-f0308 x 4 m3x8 roundhead c-02-sc-r0308 x 3 fftwelve graphite front shock tower a-01-vbc-2003-35 x 1 step7-8.

  • Page 9: Step9

    9 upper bulkhead and rear damper stay assembly 08 © vbc racing fftwelve bag marked m3x8 flathead c-02-sc-f0308 x 4 m3x8 roundhead c-02-sc-r0308 x 4 fftwelve graphite rear shock tower a-01-vbc-2004-35 x 1 step9 upper bulkhead assembly upper bulkhead a upper bulkhead b ball connector ball connector m3...

  • Page 10: Step10-11

    10 rear suspension arm assembly 09 © vbc racing fftwelve bag marked step10-11 ball connector b-02-vbc-0045 x 4 m3x10 set screw c-02-sc-ss-0310 x 4 rear suspension arm a-03-vbc-0050 x 2 suspension arm spacer t2 composite a-03-vbc-0052 x 2 suspension arm spacer t1 composite a-03-vbc-0051 x 4 suspensio...

  • Page 11: Step10-11

    11 rear suspension arm assembly 10 © vbc racing fftwelve bag marked step10-11 ball connector b-02-vbc-0045 x 2 m3x10 set screw c-02-sc-ss-0310 x 2 rear suspension upright a-03-vbc-0037 x 2 rear wheel axle b-02-vbc-2027 x 2 5x10mm ball bearings c-02-bb-1005-b x 4 m1.6x4 screw c-02-sc-r1.6x4 x 2 0 off...

  • Page 12: Step12-14

    12 front suspension arm assembly 11 © vbc racing fftwelve bag marked step12-14 front suspension arm a-03-vbc-0024 x 2 turnbuckle cup open type l a-03-vbc-0041 x 2 turnbuckle cup open type s a-03-vbc-0040 x 2 suspension arm spacer t2 a-03-vbc-0052 x 2 suspension arm spacer t1 a-03-vbc-0051 x 4 suspen...

  • Page 13: Step12-14

    13 front suspension arm assembly 12 © vbc racing fftwelve bag marked step12-14 1mm suspension shim a-01-vbc-0037 x 1 e10 suspension mount b-02-vbc-0061-10 x 1 m3x6 flat head screw c-02-sc-f0306 x 2 steering block version 2 a-03-vbc-0079 x 2 wheel axle b-02-vbc-0025 x 2 axle joint b-02-vbc-0026 x 2 a...

  • Page 14: Step12-14

    13 front suspension arm assembly 13 © vbc racing fftwelve bag marked step12-14 right c-hub version 2 a-03-vbc-0104 x 1 left c-hub version 2 a-03-vbc-0105 x 1 m3x12 set screw c-02-sc-ss-0312 x 2 m3x9 round head screw c-02-sc-r0308 x 2 ball connector b-02-vbc-0045 x 2 steering swivel tube b-02-vbc-003...

  • Page 15: Step12-14

    14 front suspension arm assembly 14 © vbc racing fftwelve bag marked step12-14 turnbuckle cup a-03-vbc-0039 x 2 turnbuckle cup s a-03-vbc-0056 x 2 m3x32mm turnbuckle b-02-vbc-0036 x 2 m3x6 set screw c-02-sc-ss-0306 x 2 3x23 upright pin b-02-vbc-0032 x 2 turnbuckle cup turnbuckle cup s m3x32mm turnbu...

  • Page 16: Step15-16

    15 motor mount assembly 15 © vbc racing fftwelve bag marked step15-16 front bumper assembly b-03-vbc--2036 x1 fftwelve front foam bumper (lightweight) a-03-vbc-2032 x1 fftwelve front bumper bottom support fftwelve alum front bumper mount fftwelve motor mount motor mount assembly m3x10mm roundhead sc...

  • Page 17: Step15-16

    16 front bumper assembly 16 © vbc racing fftwelve bag marked step15-16 m3x8mm flathead screw m3x6mm roundhead screw m3x10mm roundhead screw fftwelve motor mount cooling fan installation m3x16mm roundhead screw m3x8mm roundhead screw **30x30x10mm cooling fan is not included cooling fan mount graphite...

  • Page 18: Step17-26

    17 spur gear assembly 17 © vbc racing fftwelve bag marked step17-26 xenon racing 48pitch spur gear 75t b-03-vbc-2040 x 1 m3x4 roundhead c-02-sc-r0304 x 4 m3x4mm roundhead screw pinon gear gear ra o (spur gear 75t) 27t 6.77 : 1 28t 6.53 : 1 20t 9.14 : 1 29t 6.30 : 1 21t 8.71 : 1 30t 6.09 : 1 22t 8.31...

  • Page 19: Step17-26

    18 servo assembly 18 © vbc racing fftwelve bag marked step17-26 fftwelve alum servo mount b-02-vbc-2042 x 1 alum servo mount servo spacer 1mm * servo not included ball connector m3x6mm roundhead screw m3x8mm roundhead screw m3x8mm roundhead screw m3x6mm roundhead screw m3x6mm roundhead screw m3x6mm ...

  • Page 20: Step17-26

    20 front and rear stabilizer mount assembly 19 © vbc racing fftwelve bag marked step17-26 m3x6 roundhead screw c-02-sc-r0306 x 2 make two for front & rear 1mm stabilizer connector alum stabilizer collar m3x3mm set screw m3x6mm roundhead screw m3x3mm set screw stabilizer wires d-05-vbc-2047 1.4mm sta...

  • Page 21: Step17-26

    21 front and rear stabilizer mount assembly 20 © vbc racing fftwelve bag marked step17-26 m3x8 roundhead screw c-02-sc-r0308 x 2 m3x8 flathead screw c-02-sc-f0308 x 2 1.5mm note the double ring face to ball connector make two tie rods m3x8mm flathead screw only tighten enough to remove excessive fre...

  • Page 22: Step17-26

    23 upper deck and battery guard assembly 21 © vbc racing fftwelve bag marked step17-26 m3x6 roundhead screw c-02-sc-r0308 x 8 m3x10 flathead screw c-02-sc-f0310 x 1 m3 lock nut c-02-sc-nn03 x 1 graphite adjustable battery guard a-01-vbc-2058 x 1 24 3mm spacer m3x6mm roundhead screw m3x6mm roundhead ...

  • Page 23: Step17-26

    25 receiver and esc installation 22 © vbc racing fftwelve bag marked step17-26 note the position of esc and receiver double side tape *receiver (not included) *electronic speed controller (not included) *motor (not included) 26 motor installation m3x6 roundhead screw c-02-sc-r0308 x 2.

  • Page 24: Step27-29

    Bag marked step27-29 27 assemble oil shocks 23 © vbc racing fftwelve shock body b-02-vbc-0039 x 4 shock height adjuster b-02-vbc-0042 x 4 shock bottom cap b-02-vbc-0041 x 4 shock piston (3 holes) a-03-vbc-0045 x 4 shock bottom connector a-03-vbc-0066 x 4 shaft cap a-03-vbc-0046 x 4 shaft guide a-03-...

  • Page 25: Step27-29

    Bag marked step27-29 28 assemble oil shocks part2 24 © vbc racing fftwelve shock top connector a-03-vbc-0042 x 4 spring bottom support a-03-vbc-0043 x 4 oil sealer cap b-03-vbc-0011 x 4 shock body cap b-02-vbc-0040 x 4 shock spring orange (for front) x 2 shock spring green (for rear) x 2 shock body ...

  • Page 26: Step27-29

    29 damper set assembly 25 © vbc racing fftwelve bag marked step27-29 m3x6 roundhead screw c-02-sc-r0306 x 4 alum shock mount post b-02-vbc-2054 x 2 m3x10mm set screw c-02-sc-ss-0310 x 2 68.5mm make sure both shocks are the same length note the double ring face to ball connector install left & right ...

  • Page 27: Step30-33

    30 front body post assembly 26 © vbc racing fftwelve bag marked step30-33 install left & right rear body posts install left & right front body posts m3x10mm roundhead screw m3x10mm roundhead screw front body post, l&r a-03-vbc-2055 x 2 m3x10 roundhead screw c-02-sc-r0310 x 4 rear body posts a-03-vbc...

  • Page 28: Step30-33

    32 tires installation 27 © vbc racing fftwelve bag marked step30-33 33 battery installation m4 flanges wheel nuts b-02-vbc-0086 x4 notice : make sure the wheel nuts are tight before run *battery tape (not included) *7.4v (2 cell) lipo battery (not included).

  • Page 29: Parts List

    Parts list © vbc racing fftwelve for online orders, please visit our website www.Vbcracing.Com or visit your nearest hobby store. Please visit our website for the latest vbc wildfire option parts. Order number package descriptions parts number parts descriptions a-01-vbc-2001-20 fftwelve upper deck ...

  • Page 30

    Competition grade high performance radio control racing car chassis kit 1/10 electric belt-driven front wheel drive competition car kit www.Vbcracing.Com instruction book p-2001.0 vbc racing fftwelvw fwd touring car kit d-05-vbc-0074.