Competition grade high performance radio control racing car chassis kit 1/10 rwd electric competition offroad buggy car kit e instructions manual 5 thank you for purchasing vbc racing product. This vbc racing kit is a high performance, racing grade car kit intended for experienced racers. The kit co...
Bag marked step1 asssmbling the main chassis 01 © vbc racing firebolt rm side guard, right a-03-vbc-6017 x 1 side guard, left a-03-vbc-6016 x 1 firebolt rm 7075 main chassis b-02-p60180 x 1 m3x8 flathead screw c-02-sc-f0308 x 4 m3x8 flathead m3x8 flathead m3x8 flathead m3x8 flathead.
Bag marked step2-3 2 02 © vbc racing firebolt rm firebolt alum front suspension brace b-02-vbc-6012 x 1 3x35mm suspension pin c-02-vbc-6015 x 2 front suspension arm mount a-03-vbc-6014 x 1 front suspension arm, fl a-03-vbc-6045 x 1 front suspension arm, fr a-03-vbc-6044 x 1 front suspension assembli...
3 front suspension assembly 03 © vbc racing firebolt rm step2-3 bag marked 4.7x15mm ball connector c-02-vbc-6008 x 2 firebolt alum front camber link mount b-02-vbc-6013 x 2 firebolt alum front camber link mount front center bulkhead a-03-vbc-6046 x 1 front bumper a-03-vbc-6011 x 1 firebolt graphite ...
4 front steering assembly 04 © vbc racing firebolt rm bag marked step4-6 steering center bridge a-03-vbc-6022 x 1 steering arm a-03-vbc-6028 x 2 4.7x12mm ball connector b-02-vbc-5015 x 3 5x8 ball bearings c-02-bb-0805-b x 4 m3x10 roundhead screw c-02-sc-r0310 x 2 steering swivel tube b-02-vbc-0033 x...
Bag marked step4-6 05 © vbc racing firebolt rm m3x20 roundhead screw c-02-sc-r0320 x 4 front damper mount assembly graphite front damper mount a-01-vbc-6004 x 1 m3x8 roundhead screw c-02-sc-r0308 x 4 m3 nut c-02-sc-fn03 x 2 step7-9 ca *not included in this kit sand the graphite shock tower edges wit...
Bag marked 06 © vbc racing firebolt rm front knuckle assembly 3 front caster angles included in this kit. We recommend default 0deg. C-hub, left a-03-vbc-6020 x 1 5x10 ball bearing c-02-bb-1005-b x 4 aluminium front axle washer b-02-vbc-6005 x 2 front axle c-02-vbc-6006 x 2 c-hub, right a-03-vbc-602...
Bag marked step7-9 9 steering system assembly 07 © vbc racing firebolt rm upper camber linkage steering tie rod m2x4 roundhead screw c-02-sc-r0204 x 2 2.5x6x1mm plastic spacer a-03-vbc-6052 x 2 3x52mm hardened turnbuckle 3x52mm hardened turnbuckle 32mm 32.5mm ball cups,, long ball cups,, long 3x52mm...
Bag marked step10 10 rear differentials assembly 08 © vbc racing firebolt rm fireboltdm diff joint a c-02-vbc-6012 x 1 fireboltdm diff joint b c-02-vbc-6013 x 1 firebolt 52t compsite ball diff gear a-03-p60545 x 1 firebolt diff ring c-02-vbc-6023 x 2 diff balls (2.4mm) c-03-vbc-6004 x 12 ball diff s...
Bag marked step11-12 11 installing gears 09 © vbc racing firebolt rm 12 gearbox assembly firebolt gear top shaft c-02-vbc-6005 x 1 firebolt idler shaft c-02-vbc-6002 x 2 firebolt composite idler gear a-03-p60646 x 1 idler gear spacer a-03-p60188 x 2 5x10 ball bearings c-02-bb-1005-b x 4 m3x35 roundh...
Bag marked step13-19 13 rear bulkhead assembly 10 © vbc racing firebolt rm m3x20 roundhead screw c-02-sc-r0320 x 2 m3x12 roundhead screw c-02-sc-r0312 x 4 ca *not included in this kit sand the graphite shock tower edges with #600 sand paper and apply ca glue to the edges. Firebolt rm right rear bulk...
Bag marked step13-19 15 installing the gearbox 11 © vbc racing firebolt rm m3x8 flathead screw c-02-sc-f0308 x 6 m3x8 flathead firebolt alum rear suspension mount, rf b-02-vbc-6003 x 1 rear rf mount spacer 1.5mm a-01-vbc-6081 x 1 3x6x1.2mm plastic spacer a-03-vbc-6055 x 4 3x44.5mm suspension pin b-0...
Bag marked step13-19 16 rear bulkhead assembly 2 12 © vbc racing firebolt rm 17 gearbox mount spacer b-02-vbc-6078 x 1 m3x9 roundhead screw c-02-sc-r0309 x 2 m3x9 roundhead screw m3x22 flathead screw c-02-sc-f0322 x 2 gearbox mount spacer m3x22 flathead screw m3x10 roundhead screw m3x10 roundhead sc...
Bag marked step13-19 18 rear suspension arm assembly 13 © vbc racing firebolt rm firebolt rear upright a-03-vbc-6038 x 2 left rear hub right rear hub multiple camber link settings by placing the camber link holders into different positions axle grease axle grease 4.7x14mm ball connector c-02-vbc-603...
Bag marked step13-19 19 14 © vbc racing firebolt rm 3x45mm hardened springsteel turnbuckle c-02-vbc-6004 x 2 ball cup l type, long right a-03-vbc-6047 x 1 ball cups, long a-03-vbc-6030 x 2 ball cup l type, long left a-03-vbc-6048 x 1 2.5x6x1mm plastic spacer a-03-vbc-6052 x 2 2.5x6x2mm plastic space...
Bag marked step20-22 20 firebolt suspension shocks assembly 15 © vbc racing firebolt rm front firebolt shock shaft c-02-vbc-6019 x 2 rear firebolt shock shaft c-02-vbc-6020 x 2 m2 e-clip b-03-vbc-0129 x 8 damper inner spacer a-03-vbc-6063 x 8 1.6x2 holes piston for firebolt shocks a-03-vbc-6004 x 2 ...
Bag marked step20-22 21 front suspension assembly part1 16 © vbc racing firebolt rm firebolt alum shock cap b-02-vbc-6021 x 4 front spring, medium(red) c-02-vbc-6021 x 2 rear spring, medium(red) c-02-vbc-6022 x 2 m1x1x3 o-ring r-02-vbc-6035 x 4 m2x4 roundhead screw c-02-sc-r0204 x 4 fill supplied sh...
Bag marked step20-22 22 installing front and rear suspension shocks 17 © vbc racing firebolt rm damper cap shaft pivot ball a-03-vbc-6061 x 4 m3 plastic lock nut a-03-vbc-6062 x 4 suspension arm spacer t2(composite) a-03-vbc-0052 x 2 m3x14 roundhead screw c-02-sc-r0314 x 2 m3x18 roundhead screw c-02...
Bag marked step23-24 23 battery mount assembly 18 © vbc racing firebolt r m firebolt alum battery post, short b-02-vbc-6008 x 4 m3x10 set screw c-02-sc-ss-0310 x 2 firebolt alum battery post, short firebolt alum battery post, short firebolt alum battery post, short m3x10 set screw m3x10 set screw.
Bag marked step25-26 25 installing the slipper 19 © vbc racing firebolt rm firebolt slipper plate b-02-vbc-6023 x 2 m4 flanged wheel nuts b-02-vbc-0086 x 1 firebolt slipper spring c-03-vbc-6002 x 1 firebolt slipper pad v2 c-03-p60619 x 2 48p 81t spur gear v2 a-03-p60618 x 1 firebolt slipper pad v2 4...
Bag marked step25-26 26 intall gear diff cover 20 © vbc racing firebolt rm firebolt gear cover a-03-vbc-6006 x 1 slipper ajust cover cap a-03-vbc-6043 x 1 firebolt gear cover slipper adjust cover cap m2x4 roundhead screw m3x6 roundhead screw c-02-sc-r0306 x 4 m2x4 roundhead screw c-02-sc-r0204 x 1 e...
Bag marked step27-32 27 mounting transmitter/esc/battery 21 © vbc racing firebolt rm firebolt center battery stopper a-03-vbc-6074 x 2 firebolt side battery stopper x a-03-vbc-6075 x 1 firebolt side battery stopper y a-03-vbc-6076 x 1 receiver, electronic speed controller and double sided tapes are ...
Bag marked step27-32 29 mounting different battery positions 22 © vbc racing firebolt rm shorty pack inline backward setup shorty pack horizontal forward setup shorty pack horizontal backward setup square pack setup mounting different batteries on the firebolt by adjusting the center and the side ba...
Bag marked step27-32 30 install front and rear wheels 23 © vbc racing firebolt rm m4 steel flanged lock nut c-02-p60726 x 2 left side window right side window front window left side window front window right side window follow the lines on the body to cut out the shape using scissors. After painting...
Bag marked step27-32 24 © vbc racing firebolt rm m3x8 round head screw c-02-sc-ss-0308 x 2 firebolt dm rear wing spacer a-03-vbc-6037 x 2 32 installing the car body and rear wing 6° 2° 2° the rear wing angle is adjustable by adding or removing the rear wing spacer firebolt dm rear wing spacer body c...
Competition grade high performance radio control racing car chassis kit 1/10 rwd electric competition offroad buggy car kit instruction book p01-p-60762 vbc racing fireboltrm offroad car kit d-05-vbc-ck15 www.Vbcracing.Com.
