1. DL manuals
  2. VBC Racing
  3. Motorized Toy Car
  4. Lightning 10M 235
  5. Instruction Manual

VBC Racing Lightning 10M 235 Instruction Manual

Manual is about: 1/10 SCALE ELECTRIC COMPETITION CAR KIT

Summary of Lightning 10M 235

  • Page 1

    Competition grade high performance radio control racing car chassis kit 1/10 scale electric competition car kit e instructions manual 5 thank you for purchasing vbc racing product. This vbc racing kit is a high performance, racing grade car kit intended for experienced racers. The kit compose of vbc...

  • Page 2: Step1

    Bag marked step1 1 graphite edges protection procedure 01 © vbc racing lightning10m235 ca sand the chassis edges with #600 sand paper(not included) and apply ca glue(not included) to the edges of the chassis. Sand the below graphite edges with #600 sand paper and apply ca glue to the edges. *not inc...

  • Page 3: Step2-5

    Bag marked 02 © vbc racing lightning10m235 pivot brace d-05-vbc-0101 x 1 pivot brace cover d-05-vbc-0101 x 1 pivot balls a-03-vbc-1027 x 5 m3x6 flathead c-02-sc-f0306 x 5 pivot ball shoulder should be facing downwards pivot brace pivot brace cover m2x6 cap head use screws to adjust the play of the p...

  • Page 4: Step2-5

    Bag marked 03 © vbc racing lightning10m235 m3x10 flathead c-02-sc-f0310 x 2 m2x6 cap head c-02-sc-r2.0x6 x 4 pivot brace assembly part2 step2-5 lightning pod link set 2 rear bulkhead assembly part1 3 m3 locknut c-02-sc-nn03 x 2 tighten each side screw slowly, make sure the lower pod plate can rotate...

  • Page 5: Step2-5

    04 © vbc racing lightning10m235 bag marked step2-5 3 4 m3x6 flathead c-02-sc-f0306 x 2 chassis brace assembly 14mm aluminum standoff b-02-vbc-5073 x 2 side spring (medium/gold) a-03-vbc-1047 x 2 aluminium side spring retainer b-02-vbc-5074 x 2 m3x6 roundhead c-02-sc-r0306 x 2 m3x8 set screw c-02-sc-...

  • Page 6: Step2-5

    Bag marked step2-5 05 © vbc racing lightning10m235 4 05 step2-5 lightning 10m235 graphite rear shock mount a-01-p51397 x 1.

  • Page 7: Step2-5

    Bag marked step2-5 06 © vbc racing lightning10m235 5 06 m3x6 roundhead c-02-sc-r0306 x 2 m3x6 roundhead m3x6 roundhead.

  • Page 8: Step6

    Bag marked step6 07 © vbc racing lightning10m235 m2.5x4 roundhead c-02-sc-r2504 x 4 ball connector 4.7x12mm a-02-vbc-5015 x 2 lightning12 front axle b-02-vbc-5060 x 2 pivot ball b-02-vbc-5068 x 4 m3x15mm turnbuckle, black a-02-vbc-5053 x 2 lightning12 front upper arm eyelet a-02-vbc-5092 x 2 m3x10 r...

  • Page 9: Step6

    Bag marked step6 08 © vbc racing lightning10m235 lightning height adjust spacer, 1.5mm a-01-vbc-5045 x 2 front suspension assembly 6 1.80 1.2mm spacer 0.8mm spacer no spacer 3.25 6.15 caster adjustments m2x4 roundhead screw c-02-sc-r0204 x 2 2mm upper hinge pin c-02-vbc-5054 x 2 caster spacer, 0.8mm...

  • Page 10: Step7

    Bag marked step7 ball differential assembly 09 © vbc racing lightning10m235 differental drive ring b-02-vbc-1001 x 2 thrust cone b-02-vbc-5081 x 1 7 differential seal o-ring b-02-vbc-5082 x 2 ball bearing 3/8”x1/4” c-02-bb-3814 x 1 bevelled washer c-02-vbc-5076 x 3 64 pitch 88t spur gear a-03-p50232...

  • Page 11: Step7-8

    Bag marked step7-8 10 © vbc racing lightning10m235 m2.5x8 cap head screw c-02-sc-r2508 x 2 7 ball differential assembly lightning10 left rear wheel hub b-02-p50213 x 1 8 servo and top plate assembly m3x6x0.5mm spacer b-02-vbc-5093 x 4 m3x8 roundhead c-02-sc-r0308 x 4 3 difference servo adaptor for s...

  • Page 12: Step8

    Bag marked step8 servo and top plate assembly 11 © vbc racing lightning10m235 8 lightningf upper deck support mount b-02-vbc-5096 x 2 m3x6 flathead m3x6 flathead m3x6 flathead c-02-sc-f0306 x 4 firebolt center battery stopper a-03-vbc-6074 x 1 option :low cg brass weight 23.5gm c-02-g50222 m3x6 flat...

  • Page 13: Step9

    Bag marked step9 12 © vbc racing lightning10 9 shock assembly.

  • Page 14: Step10-12

    Bag marked step10-12 shock assembly 13 © vbc racing lightning10m235 9 10 front bumper assembly m2x12 shaft pin b-02-vbc-0022 x 2 body height adjuster support a-03-vbc-0015 x 2 front body post a-03-vbc-0013 x 2 body height adjuster support body height adjuster support front body post front body post ...

  • Page 15: Step18-20

    Bag marked step18-20 14 © vbc racing lightning10m235 11 installing front bumper 12 rear body post assembly m2x12 shaft pin b-02-vbc-0022 x 2 body height adjuster support a-03-vbc-0015 x 2 front body post a-03-vbc-0013 x 2 front body post m3 locknut c-02-sc-nn03 x 2 m3x10mm flat head screw c-02-sc-f0...

  • Page 16: Step18-20

    Bag marked step18-20 install wheels and motor 15 © vbc racing lightning10m235 4-40x5/16” cap head screw x 8 bearing 1/8x5/16, flanged c-02-bb-1856f x 4 m3 locknut c-02-sc-nn03 x 2 m3.3x0.4 kingpin shim c-02-vbc-5069 x 2 12 m3x8 roundhead c-02-sc-r0308 x 2 13 install motor and electronics 4-40x5/16” ...

  • Page 17: Step12

    Bag marked step12 16 © vbc racing lightning10m235 install electronics 15 install esc and receiver [items are not included] double side tape.

  • Page 18: Www.Vbcracing.Com

    Instruction book p-01-p51438 vbc racing lightning10m235 1/10 pan car kit d-05-vbc-ck28 www.Vbcracing.Com 1/10 scale electric competition pan car kit competition grade high performance radio control racing car chassis kit.

  • Page 19: Parts List

    Order number package descriptions parts number parts descriptions quantity in a pkg a-01-p51395 lightning10m graphite main chassis a-01-p51395 lightning10m graphite main chassis 1 a-03-vbc-5007 pivot brace (bottom) 1 a-03-vbc-5008 pivot brace (cover) 1 a-03-vbc-5009 pod link set a-03-vbc-5009 pod li...

  • Page 20: Parts List

    Parts list b-02-vbc-5057 aluminum upper arm mount b-02-vbc-5057 lightning12 aluminum upper arm mount 1 b-02-p50233 lightning10 alu7075 steering knuckle 2 c-02-p50259 m2.5x0.5 shim 2 b-02-vbc-5060 lightning front axles b-02-vbc-5060 lightning front axle 2 b-02-vbc-5065 alum front bulkhead l b-02-vbc-...