- DL manuals
- VBC Racing
- Automobile
- Lightning FX
- Instruction Manual
VBC Racing Lightning FX Instruction Manual - Step18-19
BAG MARKED
STEP18-19
17
© VBC Racing LIGHTNING FX
18
Wheels and Antenna Holder Assembly
Antenna Mount A-03-VBC-1043 x 1
M3x6 Flathead C-02-SC-F0306 x 1
M4 Aluminum Lock Nut A-03-VBC-1024 x 2
5x10 Ball Bearing C-02-BB-1005-B x 4
Wheel Spacer B-02-VBC-0019-575 x 2
M4 Flanged Wheel Nut B-02-VBC-0086 x 2
Antenna Mount
*Tires, wheels and tire inserts are not included in this kit
Wheel Spacer
M3x6 Flathead
5x10 Ball Bearing
5x10 Ball Bearing
M4 Aluminum Lock Nut
M4 Flanged Wheel Nut
Summary of Lightning FX
Page 1
Competition grade high performance radio control racing car chassis kit 1/10 scale electric competition formula car kit e instructions manual 5 thank you for purchasing vbc racing product. This vbc racing kit is a high performance, racing grade car kit intended for experienced racers. The kit compos...
Page 2: Step1
Bag marked step1 1 graphite edges protection procedure 01 © vbc racing lightning fx ca sand the chassis edges with #600 sand paper(not included) and apply ca glue(not included) to the edges of the chassis. Sand the below graphite edges with #600 sand paper and apply ca glue to the edges. *not includ...
Page 3: Step2-3
Bag marked 2 02 © vbc racing lightning fx pivot brace (bottom) a-03-vbc-5007 x 1 pivot brace (cover) a-03-vbc-5008 x 1 pivot balls a-03-vbc-1027 x 5 m3x6 flathead c-02-sc-f0306 x 5 pivot ball shoulder should be facing downwards pivot brace assembly part1 step2-3 pivot brace (bottom) pivot brace (cov...
Page 4: Step2-3
Bag marked 03 © vbc racing lightning fx m2x6 cap head c-02-sc-r2.0x6 x 4 pivot brace assembly part2 step2-3 2 03 tighten each side screw slowly, make sure the lower pod plate can rotate freely. Lightning pod link set a-03-vbc-5009 x 2 lightningf al7075 motor mount b-02-vbc-5128 lightningf al7075 lef...
Page 5: Step2-3
04 © vbc racing lightning fx bag marked step2-3 rear bulkhead assembly part2 m3x6 roundhead c-02-sc-r0306 x 6 rear wing mount b-02-vbc-5132 x 2 lightningf rear motor mount brace a-01-vbc-5130 x 1 rear wing mount b-02-vbc-5132 rear wing mount b-02-vbc-5132 lightningf rear motor mount brace a-01-vbc-5...
Page 6: Step4-5
Bag marked step4-5 05 © vbc racing lightning fx side spring (soft/silver) a-03-vbc-1047 x 2 4.7mm ball nuts b-02-vbc-5020 x 2 aluminum side spring retainer b-02-vbc-5074 x 2 m3x8 set screw c-02-sc-ss-0308 x 2 m3x6 roundhead c-02-sc-r0306 x 6 4 05 17mm aluminum standoff b-02-vbc-5005 x 2 lightning fx...
Page 7: Step4-5
Bag marked step4-5 side damper tube assembly 06 © vbc racing lightning fx t2 7075 spacer b-02-vbc-0019-20 x 1 m3x6 roundhead c-02-sc-r0306 x 4 lightning damper tube shaft b-02-vbc-5018 x 2 turnnuckle cup (short) a-03-vbc-5021 x 4 lightning damper tube b-02-vbc-5019 x 2 lightning damper tube shaft se...
Page 8: Step6-7
Bag marked step6-7 ball differential assembly 07 © vbc racing lightning fx differental drive ring b-02-vbc-1001 x 2 lightning12 axle height adjuster d-05-vbc-0114 6 differential seal o-ring b-02-vbc-5082 x 2 ball bearing 3/8”x1/4” c-02-bb-3814 x 1 bevelled washer c-02-vbc-5076 x 2 64 pitch 93t spur ...
Page 9: Step6-7
Bag marked step6-7 ball differential assembly 08 © vbc racing lightning fx 7 aluminum wheel hub, left b-02-vbc-5122 x 1 m2.5x8mm cap head screw c-02-sc-r2508 x 2 m2.5x8mm cap head screw m2.5x8mm cap head screw aluminum wheel hub, left.
Page 10: Step8-10
Bag marked step8-10 steering blocks 09 © vbc racing lightning fx 8 flash04 steering block & shaft d-05-vbc-1003 x 2 ball connector 4.7x12mm b-02-vbc-5015 x 2 9 front end assembly front lower arm pivot ball mount (right) d-05-vbc-1006 x 1 front lower arm pivot ball mount (left) d-05-vbc-1006 x 1 stee...
Page 11: Step8-10
Bag marked step8-10 10 © vbc racing lightning fx 10 front end assembly continue ride height 1.5mm adjustment spacer x 2 d-05-vbc-1018 m3x8 roundhead c-02-sc-r0308 x 4 m3x8 roundhead front springs (soft) c-02-vbc-5041 x 2 front springs (soft) m2.5 e-clip spacer t1 composite lower arm support a-03-vbc...
Page 12: Step11-15
Bag marked step11-15 11 © vbc racing lightning fx 11 installing front caster mount standard 0 deg active caster 5 deg active caster m3x8 roundhead c-02-sc-r0308 x 4 lightning f active caster mount base b-02-p50784 x 1 lightning f active caster mount b-02-p50785 x 2 lightning f active caster shim 2.5...
Page 13: Step11-15
Bag marked step11-15 12 © vbc racing lightning fx 12 installing front upper arm m4x28 flathead screw c-02-sc-f0428 x 1 m4x28 flathead m3 e-clip b-02-vbc-0044 x 2 13 installing steering system adjust by 1mm increasement default setting lightning fx steering arm_a b-02-p50609 x 1 lightning fx steering...
Page 14: Step11-15
Bag marked step11-15 13 © vbc racing lightning fx 14 alum servo mount for low profile servo b-02-p50262 m3x6x0.5mm spacer b-02-vbc-5093 x 4 servo horn type f (futaba) a-03-vbc-0053 x 1 servo horn type a (airtronics/ko) a-03-vbc-0054 x 1 m3x8mm round head screw c-02-sc-r0308 x 4 m3x6 flathead c-02-sc...
Page 15: Step11-15
Bag marked step11-15 14 © vbc racing lightning fx 15 install battery inline battery position transversal battery position (default setting) firebolt center battery stopper a-03-vbc-6074 x 1 firebolt side battery stopper x a-03-vbc-6075 x 1 firebolt side battery stopper y a-03-vbc-6076 x 1 m3x6 flath...
Page 16: Step16-17
Bag marked step16-17 15 © vbc racing lightning fx 16 shock assembly shock body b-02-vbc-0039 x 1 shock height adjuster b-02-p30350 x 1 shock bottom cap b-02-p30351 x 1 shock piston (3 holes) a-03-vbc-0045w x 1 shaft cap a-03-vbc-0046w x 1 shaft guide a-03-vbc-0058w x 1 shock shaft b-02-vbc-0127 x 1 ...
Page 17: Step16-17
Bag marked step16-17 16 © vbc racing lightning fx 17 installing shock to chassis m3x14 roundhead screw c-02-sc-r0314 x 1 m3x14 roundhead.
Page 18: Step18-19
Bag marked step18-19 17 © vbc racing lightning fx 18 wheels and antenna holder assembly antenna mount a-03-vbc-1043 x 1 m3x6 flathead c-02-sc-f0306 x 1 m4 aluminum lock nut a-03-vbc-1024 x 2 5x10 ball bearing c-02-bb-1005-b x 4 wheel spacer b-02-vbc-0019-575 x 2 m4 flanged wheel nut b-02-vbc-0086 x ...
Page 19: Step18-19
Bag marked step18-19 18 © vbc racing lightning fx 19 front and rear wings assembly m3x6 roundhead c-02-sc-r0306 x 3 rear wing not included fits all f103/f104 rear diffusers front wing not included fits all f103/f104 front diffusers install electronics m3x8 roundhead c-02-sc-r0308 x 2 m3x6 spacer b-0...
Page 20
19 © vbc racing lightning fx installation for lightning f front end conversion (not included) m3x6x0.5mm spacer b-02-vbc-5093 x 2 m3x6x0.5mm spacer m4x22 flathead screw c-02-sc-f0422 x 1 m4x22 flathead m3x6 flathead screw c-02-sc-f0306 x 4 m3x6 flathead original lightning f parts original lightning ...
Page 21
Competition grade high performance radio control racing car chassis kit 1/10 scale electric competition formula car kit instruction book p01-p50824 vbc racing lightning fx car kit d-05-vbc-ck16 www.Vbcracing.Com.