Set top box v3.7.3b quick start guide september 14, 2006 4410-0134-0005 ethernetv-stb set top box.
Copyright © 2006 vbrick systems, inc. All rights reserved. 12 beaumont road wallingford, connecticut 06492, usa www.Vbrick.Com this publication contains confidential, proprietary, and trade secret information. No part of this document may be copied, photocopied, reproduced, translated, or reduced to...
Stb quick start guide 1 stb v3.7.3b quick start guide this guide explains how to get your ethernetv set top box up and running in a few easy steps as shown below. For more detailed installation and configuration instructions, see the set top box admin guide. Step 1. Choose a start mode . . . . . . ....
2 ethernetv media distribution system table 1. Front panel – left to right table 2. Rear panel – left to right step 3. Set the ip address you need to know the ip address in order to run the web-based stb admin configuration application. By default, the set top box is configured for dhcp (dynamic hos...
Stb v3.7.3b quick start guide stb quick start guide 3 present. If a dhcp server is not available, you can configure the set top box with a static ip address. The stb is set to a default ip address of 172.17.11.111 as a convenience. In most cases, this should be changed to avoid conflicts. You can fi...
4 ethernetv media distribution system 12. Select and enter the netmask , gateway addresses, and hostname using the same procedure as selecting the ip address above. 13. Leave the ethernet interface mode of operation at the default auto (auto-negotiate). (other options are selectable but in most netw...
Stb v3.7.3b quick start guide stb quick start guide 5 navigating in mcs mode setup for local mode t to configure the stb for local (standalone) mode: 1. On your pc, open internet explorer and enter the ip address of the stb in the url address window. 2. Log in as root . 3. Password admin . 4. Click ...
6 ethernetv media distribution system modifying the local mode xml file this file is edited for local mode installations only and does not apply when operating in mcs or local-fullscreen mode. Below is an excerpt of the local xml file that contains local mode program information. This file will need...
Stb v3.7.3b quick start guide stb quick start guide 7 sample mpeg2 stream this is cnn. 2 239.16.120.3 4444 ftping files to the set top box use this method when moving xml files in local mode or running mpeg-4 multicast with an sdp file. T to decode multicast mpeg-4 in local mode, one method is to pl...
8 ethernetv media distribution system watching tv in local-fullscreen mode in this mode the stb will display the stream you selected in step 8 above. It covers the entire screen and there are no user controls available. Volume and mute are the only controls available from either the wireless keyboar...
Vbrick systems, inc. 12 beaumont road wallingford, connecticut 06492, usa.
