1. DL manuals
  2. VDO
  3. Radio
  4. CD 3100 -
  5. User Instructions

VDO CD 3100 - User Instructions

Other manuals for CD 3100 -: Datasheet

Summary of CD 3100 -

  • Page 1

    Installation preparation ....................................................................................................................................................................... 2 mounting ...................................................................................................

  • Page 2

    Gb 3 connector a (fig. 2) ■ power supply connections • brown wire a8: connect to an earthing point on the car body. • red wire a7: connect to a permanent 12 v supply. This is the main power supply. Ensure this connection can handle a current of 10 a. • yellow/red wire a4: connect to the switched 12 ...

  • Page 3

    4 other connections ■ yellow connector c1 for line-output (fig. 4) you can connect a power amplifier with additional loudspeakers to this set: • black wire: connect to front left (white) and front right (red) channel on amplifier. • black wire: connect to rear left (white) and rear right (red) chann...

  • Page 4

    5 gb * depending on version metal sleeve insert metal sleeve into the opening (182 x 53 mm) in the car dashboard or console (fig. 7). See separate installation card. For optimal performance of the cd player*, the metal sleeve should be positioned within the limits shown (between -10° and +30°). Fix ...

  • Page 5

    6 for theft protection this set is provided with the following security features: detachable front take the detachable front with you when leaving the car if not, the set will emit a warning beep 10 seconds after the removal of the ignition key as a reminder. Keep it in its protective cover. Always ...

  • Page 6

    7 gb on / off • switch the set on or off. You can use the set even when the car ignition is switched off. See ‘installation’. Volume please make sure you can still hear the traffic (horns, sirens, etc.). • adjust the volume. Be aware that the volume will automatically increase and decrease if the sd...

  • Page 7

    8 audio settings enter the audio menu. Select the desired audio settings: bass (low notes) bass treble (high notes) treble balance (left-right) balance fader (front-rear) fader volume volume adjust the selected audio setting. After 5 seconds the display goes back to the normal play mode. Loudness th...

  • Page 8

    9 gb waveband select the menu containing band . Select the desired waveband. Fm fm mw mw if activated lw sw fm and fm ast cover the same frequencies. The same is true for mw and mw ast. Search tuning use search tuning to automatically search for a station. • select the desired frequency. If you have...

  • Page 9

    10 presets use manually-stored presets for the stations you listen to often. Use automatically-stored presets to quickly find the strongest stations, for example when travelling through different reception areas. ■ manually storing stations on a preset you can manually store 20 fm stations on the fm...

  • Page 10

    11 gb many fm stations broadcast rds information. This set uses the rds information to offer you many advantages including: display of station name the set displays the station name instead of its frequency. Alternative frequency (af) when activated this ensures that the set remains tuned to the cur...

  • Page 11

    12 it is possible to store up to 50 stations in alphabetical order on this set in a separate fm memory. You can then select them by name. Loading rds memory to load all the receivable rds stations of the current reception area into the rds memory. Select the fm waveband. Select the menu containing m...

  • Page 12

    13 gb * depending on version playback open the front. Slide a cassette with the open side to the right into the cassette opening. Close the front. The display briefly shows tape cr if a metal or chromium cassette is inserted. Playback starts. If a cassette is already inserted : • select cassette as ...

  • Page 13

    14 fast rewind / fast forward select the menu containing frw and ffw . Activate ✔ / deactivate fast rewind fast forward you hear the radio during this operation. Cassette eject care of cassettes - only use good quality cassettes of 60 or 90 minutes preferably, chrome type cassettes. - put cassettes ...

  • Page 14

    15 gb cd playback (cd player) this cd player is suitable for 12 cm discs. Do not use unusually shaped cds. Open the front. Slide the disc into the slot with the label facing upwards. Close the front. Playback starts. If a disc is already inserted: • select cd as source. Playback starts. The display ...

  • Page 15

    16 * depending on version if the display shows: no magazine , no discs , d 2 error or cdc no front . Check that the magazine has been inserted in the cd changer. Check that the magazine has been loaded with discs (at least one). Check that the discs have been inserted the correct way up and that you...

  • Page 16

    17 gb further options • select the menu containing comp and name . ■ compression • activate ✔ / deactivate compression. This function reduces the volume of the loud sections and increases the volume of the quiet sections. See initial settings to select the amount of compression. ■ title entry • cd t...

  • Page 17

    18 temperature warning you can connect a temperature sensor to this set to give a visible and audible warning automatically when the outside temperature becomes lower than 3°c. See ‘installation’ then ‘initial settings’ option ‘temp’. Activate / deactivate temperature warning. Now when the outside t...

  • Page 18

    19 gb * depending on version choose what the display shows; in radio mode: display options display display display display display display display display in cassette* mode: in cd* mode: in cd changer* mode (if connected): during a telephone mute (if connected): current track and track time. Station...

  • Page 19

    20 it is possible to modify many of the set’s initial settings according to your preferences. Enter the initial settings menu. Select one of the options you want to modify. Alter the chosen option. - select the temperature format temp [no, celsius, fahrenh] (when a temperature sensor is connected). ...

  • Page 20

    21 gb * depending on version - select the type of confirmation beep. Beep type [1, 2, 3, 4] beep is only emitted from the front speakers. - select the confirmation beep level. Beep level [1, 2, 3, 4, 5] - select the compression level for cd playback* cd comp [low, high] (low retains the peaks in the...

  • Page 21

    22 notes and troubleshooting environment this booklet is printed on low-chlorine recyclable paper that can be used for recycling. Checks before requesting service there may be times when you suspect that your car radio is not functioning as you expect it to. Before calling for service please read th...

  • Page 22

    23 gb * depending on version symptoms possible cause / remedy radio display shows frequency (not station name). Set is tuned to non-rds station or rds is not active, see ‘initial setting’ option ‘rds’. Display shows ‘alarm’. Emergency announcement is being broadcast. Unable to tune to desired statio...