VDO Cyclecomputing M3 WR Manual
Summary of M3 WR
Page 1
Www.Vdocyclecomputing.Com/service english installation video operating video settings video.
Page 2: M3 Wr
2 m3 wr preface pack contents congratulations in choosing a vdo computer, you have opted for high-quality device with first rate technology. To optimally use the computer, we recommend that you read this manual carefully. It contains full operating instructions and many useful tips. We hope you enjo...
Page 3: M3 Wr
3 m3 wr table of contents display .................................................................. 04 buttons ................................................................. 06 functions .............................................................. 07 accessing the total values ...................
Page 4: M3 Wr
4 m3 wr display the vdo m3 has a large, easy-to-read display that can be divided into three areas. Area 1: the top line of the display permanently indicates the current speed. Area 2: the middle line uses clear text to display a description of the selected indicator function. Area 3: the bottom line...
Page 5: M3 Wr
5 m3 wr display on the left of the display, next to the speed indicator, you will find the icons: “ ”: the icon is on if the trip section counter has been started. A more detailed description of the trip section counter can be found on page 31. “up/down arrow” the arrows indicate whether you are cur...
Page 6: M3 Wr
6 m3 wr buttons the vdo m3 has two buttons. Set in function mode: – scroll backwards through the functions – open the setting mode (press and hold) – access the total values for distance and ride time (press and hold) in setting mode: – open the setting – confirm the setting once ready – exit settin...
Page 7: M3 Wr
7 m3 wr functions the vdo m3 has the following functions: current speed the current speed is permanently shown on the display. With a wheel circumference of 2,155 mm, the maximum possible speed is 199 kmh or 124 mph. Current distance the current distance (distance for the current trip) counts up to ...
Page 8: M3 Wr
8 m3 wr functions section time the vdo m3 has a trip section counter. The trip section counter is like a stopwatch. If the trip section counter is running, the section time is recorded, as on a stopwatch. When the trip section counter is running, the section distance is also recorded. The trip secti...
Page 9: M3 Wr
9 m3 wr functions navigator the navigator is a second, completely independent trip distance counter. The navigator is used to measure trip sections. The navigator is particularly helpful when riding a route shown in a road book. The navigator can: – be reset to zero as often as desired and independe...
Page 10: M3 Wr
10 m3 wr accessing the total values the total values for the distance travelled and the ride time are accessed separately from the data for the current trip. To access the totals, press and hold the set button until the menu opens. Press the set button to open the totals (total values) screen. Press...
Page 11: M3 Wr
11 m3 wr accessing the total values if you have also used bike 2, when continuing scrolling by pressing the bike button, the values for bike 2 are also displayed here. Press the bike button to scroll on to total distance bike 2 press the bike button to scroll on to total ride time bike 2 pressing th...
Page 12: M3 Wr
12 m3 wr bike set operation while cycling while cycling, the display functions can be accessed by pressing the bike button (scroll forwards through the functions ). Pressing the bike button shows the next function on the display. By pressing the set button you can also scroll backwards through the f...
Page 13: M3 Wr
13 m3 wr 90° 1–5 mm 1 2 3 4 5 7 – attaching the bracket and the sensor start by attaching the sensor and the magnet. Step 1 place the rubber shim under the sensor. Attach the sensor to the fork side that corresponds to the side on which you later want to attach the computer to the handlebars (right ...
Page 14: M3 Wr
14 m3 wr 1. Lock 2. Click 2. Unlock unlock lock inserting the computer into the bracket the vdo twist-click system securely connects the computer to the handlebar bracket. How to insert the computer: step 1 place the computer into the bracket in a 10 o’clock position. Step 2 rotate the computer to t...
Page 15: M3 Wr
15 m3 wr settings – language the following display languages can be selected for the vdo m3: – german – english – french – italian – spanish – dutch – polish how to select the language: press and hold the set button until the settings menu opens. The totals (total values) first appear on the display...
Page 16: M3 Wr
16 m3 wr settings – language you can now press the bike button to select a different language. Press the set button to confirm your language setting. The response “set ok” appears on the display. If you want to configure further settings, press the bike button to access these. If you do not want to ...
Page 17: M3 Wr
17 m3 wr settings – unit use the unit settings to specify the measurement formats for: – speed (kmh or mph) – temperature (c or f) – clock (24-hour or 12-hour with am/pm) how to set the unit: press and hold the set button until the settings menu opens. Press the bike button to scroll from totals to ...
Page 18: M3 Wr
18 m3 wr settings – unit the setting for the time format now appears on the display. Here, you can select a 24-hour format or a 12-hour format with am/pm. Press the bike button to make the selection. Press the set button to confirm the selection. The response “set ok” appears on the display. If you ...
Page 19: M3 Wr
19 m3 wr 1x you can set the roll circumference of your wheel in millimetres on the vdo m3 or select the applicable tyres from a tyre table. The more accurate this setting, the more accurate your speed indicator and the measurement of the distance you have travelled. You can find the values for your ...
Page 20: M3 Wr
20 m3 wr settings – wheel circumference/wheel size how to set your wheel circumference: press and hold the set button until the settings menu opens. Press the bike button to switch from totals to settings. Press the set button to open the settings. “language” appears on the display. Press the bike b...
Page 21: M3 Wr
21 m3 wr settings – wheel circumference/wheel size manual setting by entering the roll circumference in millimetres/inch for mm: the first two digits (in the example “21”) flash. Press the bike button to set these digits to the desired value. For inch: the inch value is flashing. Press the bike butt...
Page 22: M3 Wr
22 m3 wr settings – wheel circumference/wheel size setting the wheel size using the tyre list open the wheel size settings via the tyre list by pressing the set button (see page 20). Select appears on the display. Press the bike button to scroll through the tyre list until your tyre is displayed (in...
Page 23: M3 Wr
23 m3 wr settings – clock in the vdo m3, you can set the clock in 12-hour am/pm format or 24-hour format. Specify the desired time format in the unit settings (see page 17). How to set the time: press and hold the set button until the settings menu opens. Press the bike button to move from totals to...
Page 24: M3 Wr
24 m3 wr settings – time the minute digits now flash on the display. Press the bike button to set the minutes. Press the set button to confirm your setting. The response “set ok” appears on the display. If you want to configure further settings, press the bike button to access these. If you do not w...
Page 25: M3 Wr
25 m3 wr settings – total values – total distance you can set the total distance ridden on the vdo m3. For example, you can enter your data here at the start of a new cycling season. You can set the total distance separately for bike 1 and bike 2. Attention: the m3 has a data memory. No data is lost...
Page 26: M3 Wr
26 m3 wr settings – total values – total distance the left digit flashes. Press the bike button to change the digit. Once this digit has been set, confirm the setting by pressing the set button. The next digit starts to flash and is ready to be set. Press the bike button to change this digit. Once t...
Page 27: M3 Wr
27 m3 wr settings – total values – total ride time you can set the total ride time on the vdo m3. E.G. You can set your total ride time (cumulative ride time for all trips) at the start of the new cycling season). You can set the values separately for bike 1 and bike 2. Attention: the m3 has a data ...
Page 28: M3 Wr
28 m3 wr settings – total values – total ride time the next digit on the left starts to flash and is ready to be set. Press the bike button to set the value for this digit. Press the set button to confirm your setting. Once you have set all four digits, confirm the setting again by pressing the set ...
Page 29: M3 Wr
29 m3 wr setting the navigator the navigator is a second, completely independent trip distance counter. The navigator can: – be reset to zero any number of desired times during a trip – be set to a distance value – count forwards or backwards from the set distance value. How to set the navigator: pr...
Page 30: M3 Wr
30 m3 wr setting the navigator the second digit on the left flashes. Press the bike button to change the digit. Press the set button to confirm the entry. Once all the digits have been set, confirm the entry by pressing the set button. The response “set ok” appears on the display. The vdo m3 returns...
Page 31: M3 Wr
31 m3 wr trip section counter the vdo m3 has a time and distance counter that works similarly to a stopwatch. When the trip section counter is running, the time and distance covered in this time are recorded. Starting the trip section counter simultaneously press the bike and set buttons. The sectio...
Page 32: M3 Wr
32 m3 wr resetting the trip section counter to zero to reset the counter either the section time or the section distance must be shown on the display. Press and hold the bike button. The text trip section reset appears on the display. If you continue to hold down the bike button, the trip section da...
Page 33: M3 Wr
33 m3 wr bike selection: bike 1 or bike 2 the vdo m3 can be used on two bikes. The data is separately recorded and saved for each bike. This menu area can be used to select which bike you want to ride. How to select a bike: press and hold the bike and set buttons simultaneously for a few seconds. Th...
Page 34: M3 Wr
34 m3 wr ! Open close new old 10 sec. 1 2 3 replacing the battery in the computer to ensure your cycle computer is fully functional, we recommend replacing the battery annually. Attention: your settings as well as your total distance, total ride time and altitude gain/loss for the year remain stored...
Page 35: M3 Wr
35 m3 wr terms of guarantee vdo cycle parts offers a two-year guarantee on your vdo computer, starting from the date of purchase. This guarantee covers material and processing defects on the computer itself, the sensor/transmitter and the handlebar bracket. Cables, batteries and mounting materials a...
Page 36: M3 Wr
36 m3 wr troubleshooting error possible cause correction half segments on the display (e.G. After a battery change) computer software not running correctly after battery change remove and re-insert the battery no speed displayed distance from sensor to magnet too great correct the sensor and magnet ...
Page 37: M3 Wr
37 m3 wr technical specifications computer: approx. 49 h x 33 b x 12 d mm computer weight: approx. 30 g handlebar bracket weight: approx. 10 g computer battery: 3v, type 2032 computer battery service life: approx. 1 year (approx. 400 ride hours, approx. 8,000 km (5,000 mi)) temperature indicator ran...
Page 38: M3 Wr
38 m3 wr correct disposal of this product (electrical waste) (to be used in eu countries and other european countries with a separate collection system). The labelling on the product and the relevant literature indicates that it must not be disposed of with normal house- hold waste at the end of its...
Page 39: Www.Vdocyclecomputing.Com
Www.Vdocyclecomputing.Com cycle parts gmbh le quartier hornbach 13 67433 neustadt/weinstrasse (germany) +49 (0) 63 21- 95 82 7 - 0