1. DL manuals
  2. VDO Cyclecomputing
  3. Bicycle Accessories
  4. MC1.0
  5. Instruction Manual

VDO Cyclecomputing MC1.0 Instruction Manual

Summary of MC1.0

  • Page 1

    Cyclecomputing instruction manual bedienungsanleitung manuel d´installation et d´utilisation manuale d´installazione e funzionamento instalacion y operaciÓn manual handleiding mc1.0

  • Page 2: Screw

    P1 screw.

  • Page 3

    P1 p2.

  • Page 4

    P4 1.Lock 2.Click 2.Unlock lock unlock.

  • Page 5

    P5 open close.

  • Page 6

    P6.

  • Page 7

    P7 press mode 2 for next press mode 1 to select press ac-button to begin or install battery (p6) • • • • • • • automatic press mode 2 for next press mode 1 to select press mode 2 for next press mode 1 to select press mode 2 for next press mode 1 to select press mode 2 for next press mode 1 to select...

  • Page 8

    P8 ws in mm / inch 1x.

  • Page 9

    P9 etrto ws in mm kmh ws in inch mph 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2070 81,5 50-559 26x1,9 2089 82,2 54-559 26x2,00 2114 83,2 57-559 26x2,125 21...

  • Page 10

    P10 press mode 2 to select between kmh and mph • • • • • • • • • • • • start at trip dist press mode 1 for 3 sec. Press mode 1 to set ws1 press mode 2 to increase press mode 1 to switch and mode 2 to increase continue for all 4 digits press mode 2 to increase press mode 1 to switch • • • • • press m...

  • Page 11

    P11 press mode 1 3sec.To start mode 2 to increase the hours press mode 2 to switch between 24h or 12h press mode 1 to set the hours press mode 1 3 sec. To end press mode 2 to increase the minutes press mode 1 to set the minutes set clock.

  • Page 12

    P13 p12 • • • • • • • • • • • • • • set navigator press mode 1 3sec.To start press mode1 3 sec. To end after you set the navigator reset navigator press mode 2 to increase press mode 1 to switch •••••••••••••••••••••••••• important: navigator in display press mode 2 to reset.

  • Page 13

    P14 press mode 1 3sec.To start press mode1 3 sec. To end after you set the odometer set odometer press mode 2 to increase press mode 1 to switch •••••••••• • • • • • • •.

  • Page 14

    P15 press any button bike check disappears the service icon will remain flashing. Another 50 km/35 mi. Then the service interval icon will also disappear bike check.

  • Page 15

    P16 p17 set home altitude press mode 1 3sec.To enter home altitude press mode 2 to increase privious value hold down to quickly scroll press mode 1 to decrease privious value hold down to quickly scroll press alti 3sec. To end •• re-calibrating altimeter press mode 1 3sec.To enter home altitude pres...

  • Page 16

    P18 press alti 3sec.To enter real altitude correction of actual altitude press mode 1 to decrease privious value hold down to quickly scroll press alti 3sec. To end press mode 2 to increase privious value hold down to quickly scroll.

  • Page 17

    1 gb mc 1.0 installation and operation manual - vdo mc 1.0 index preface important information about the altimeter 1. Mounting 2.7.1 presetting the navigator 1.1 mounting cable sensor and magnet 2.7.2 resetting the navigator to zero 1.2 mounting wire and vdo “any-size” handlebar holder 2.8 presettin...

  • Page 18

    Gb mc 1.0 2 preface thank you very much for buying a vdo mc 1.0 bicycle computer featuring an altimeter. The more familiar you get with this model, the more enjoyable your trips are going to be. Hence, our urgent request: please read thoroughly all the information provided in this manual. You are ge...

  • Page 19

    3 gb mc 1.0 1.Mounting 1.1 mounting cable sensor and magnet important: mount the sensor first, then mount the wired handlebar holder as described under 1.2 check the following while mounting: a. Distance between the sensor and magnet: 1 to 5 mm b. When mounting the sensor on a suspension fork, don’t...

  • Page 20

    Gb mc 1.0 4 1.3 twist-click mounting of computer on to holder the twist-click mounting has been exclusively developed for the new line of vdo cytec computers. The vdo mc 1.0 also features the twist-click-system. The computerhead is put onto the handlebar and by a right turn of the computerhead (twis...

  • Page 21

    5 gb mc 1.0 2. Initial set-up of your vdo mc 1.0 2.1 basic information on how to operate your vdo mc 1.0 make sure you are familiar with the computers basic operating instructions before the initial set-up and use. Your vdo mc 1.0 features 3 keys / buttons left ...... Center......Right mode1..... Al...

  • Page 22

    Gb mc 1.0 6 2.2 interrogating information with the mode1 button you call up following information: trip dist - ride time - avg speed - stop watch - max speed trip dist trip counter for your individual trip, counting to 999.99 km or mi ride time trip timer featuring automatic start/stop function up t...

  • Page 23

    7 gb mc 1.0 2.3 calling up set-up modes for computer / speedometer functions other than calling up various functions and informations, the mode 1 key calls up any set-up mode. Calling up the set-up modes requires a 3 sec pressing of the mode 1 key. Set-up modes can be entered from various informatio...

  • Page 24

    Gb mc 1.0 8 2.4 selecting your language after installing the battery or pressing the ac-button your vdo mc 1.0 automatically requests a display language to be selected. After installing the battery, your vdo mc 1.0 first greets you in english (by default) displaying "enjoy your mc1.0" the vdo mc 1.0...

  • Page 25

    9 gb mc 1.0 2.5 selecting the wheel circumference (wheelsize) your computer vdo mc 1.0 indicates your wheel size as ws (wheelsize) = wheel circumference. Your vdo mc 1.0 is able to process two different wheelsizes for two different bikes (i.E. Road bike and mountainbike) the following default values...

  • Page 26

    Gb mc 1.0 10 2.5.2 entering (programming) the wheelsize(s) step 1: by pressing mode 1 call trip dist in your display. Step 2: press mode 1 for 3 sec. In the upper part of the display you see "ws1" and "kmh" or "mph" flashing. The lower part of the display alternately shows "enter mtric systm" and "k...

  • Page 27

    11 gb mc 1.0 2.5.3 switching wheelsizes (changing from ws1 to ws2) to change from wheelsize 1 to wheelsize 2 and vice versa press and hold mode1 and mode2 simultaneously for 3 sec. Warning: once you have switched from wheelsize 1 to wheelsize 2 or vice versa following tripdata of wheelsize 1 or 2 is...

  • Page 28

    Gb mc 1.0 12 2.7 the navigator the navigator is a second, individual trip distance counter that can be: • manually reset to zero • preset to a certain value, the trip distance is then counted from this value. The navigator is very helpful following road book instructions or tour suggestions of bike ...

  • Page 29

    13 gb mc 1.0 2.7.2 resetting the navigator to zero step 1: mode 2 calls navigator into display step 2: press mode 2 for 3 sec., the value indicated is being reset to zero. Your vdo mc 1.0 will be counting on from zero. Warning: before resetting to zero, make sure the information navigator is called ...

  • Page 30

    Gb mc 1.0 14 2.9 manual operation of the stopwatch your vdo mc 1.0 features a manual stopwatch in addition to the ride-timer with automatic start/stop function. The manual stopwatch is counting up to 19:59:59 hh:mm:ss there are two ways to call in the stopwatch and simultaneously start it: direct st...

  • Page 31

    15 gb mc 1.0 4. Service interval indicator your vdo mc 1.0 features a service interval indicator to remind you to have your bike serviced at your trusted bike shop. The service interval reminder is indicated separately for both your bikes. Every 750 km / 468 mi, the service icon is activated. The se...

  • Page 32

    Gb mc 1.0 16 6. Altimeter information of your vdo mc 1.0 your vdo mc 1.0 does permanentely display following altimeter-information: • current altitude in meters of feet • current incline or grade in % • current temperature in ° c or ° f important: current incline or grade is displayed in increments ...

  • Page 33

    17 gb mc 1.0 6.1. The home altitude or basis altitude of choice 6.1.1. Significance of the home or basis altitude the altitude calculation works by measuring barometric pressure. Your vdo mc 1.0 converts the data of current barometric pressure into the respective altitude. In order for your vdo mc 1...

  • Page 34

    Gb mc 1.0 18 6.1.2. Setting up / entering your home or basis altitude step 1: by pressing alti call trip alti in the display. Push mode1 for 3 sec enter home alti tude and its previous value will be displayed. Step 2: by pressing mode2 the previous value is increased. Hold down the button to quickly...

  • Page 35

    19 gb mc 1.0 6.2 correction of actual altitude while you ride, the airpressure changes due to your gain in altitude as well as due to a wether change.To correct that influence of the wether change you can also adjust the actual altitude display at your mc 1.0.Should you see a sign indicating actual ...

  • Page 36

    Gb mc 1.0 20 8. Warranty we warranty vdo mc 1.0 (sensor, computer head and handlebar holder) to the original purchaser for five years from date of purchase against defects in material and workmanship. This does not cover the batteries and defects resulting from normal wear and tear, improper care, a...

  • Page 37

    21 gb mc 1.0 9. Technical data computer 45 x 52 x 16 mm 45 g handlebar holder 15 g batteries computer 3v, type 2032 operating temperatures lcd-display -15 ° c to +80 ° c speed range min 2.5 km/h max 120 km/h trip distance counter up to 999.99 km or mi navigator up to 999.99 km or mi odometers 1 and ...