1. DL manuals
  2. VDO Cyclecomputing
  3. Bicycle Accessories
  4. Z1
  5. Instruction Manual

VDO Cyclecomputing Z1 Instruction Manual

Manual is about: VDO SERIES-Z

Summary of Z1

  • Page 1

    I n s t r u c t i o n m a n u a l / b e d i e n u n g s a n l e i t u n g / m a n u e l d ´ i n s ta l l at i o n e t d ´ u t i l i s at i o n / h a n d l e i d i n g / m a n u a l e d ´ i n s ta l l a z i o n e e f u n z i o n a m e n t o i n s t r u k c j a o b s l u g i l i c z n i k a / i n s ta...

  • Page 2

    My settings ✍ age: weight: limit 1: low: high: limit 2: low: high: limit 3: low: high: recovery pulse: recovery time: bike 1 weight: bike 2 weight: bike 2 wheelsize: bike 1 wheelsize: home altitude: bike 1 service intervall: bike 2 service intervall: max heartrate: further settings:.

  • Page 3

    Picturebook * watch out: old batteries require special disposal please read instructions for end-off-life disposal treatment p01 8x * cd-rom pc-sport only for models z2 pc-link / z3 pc-link.

  • Page 4

    Picturebook picturebook open close open close ! Open close ! P02.

  • Page 5

    Picturebook open close ! P03 only for models z2/z2 pc-link z3/z3 pc-link.

  • Page 6

    Picturebook 90° p04/05.

  • Page 7

    Picturebook p06 unlock lock 1.Lock 2.Click 2.Unlock.

  • Page 8

    Picturebook p07 1-5 mm.

  • Page 9

    Picturebook p08 only for models z2/z2 pc-link z3/z3 pc-link.

  • Page 10

    Picturebook open close p09 p09-2.

  • Page 11

    Picturebook ws in mm / inch 1x tire size ws in mm kmh ws in inch mph 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2055 80,9 50-559 26x1,9 2060 81,1 n/a 26 x 1,...

  • Page 12

    Picturebook p11 only for models z2 pc-link z3 pc-link.

  • Page 13

    4 en congratulations with your selection of a vdo z1 you have opted for high-quality sports information computer. In order to fully benefit from the potential of the computer, we recommend that you carefully read this manual. It contains all operating instructions and many useful tips. We extend our...

  • Page 14

    5 instruction manual table of contents 1.1. General 1.2. Important instructions for the digital wireless system 1.3. Control system - operation 1.3.1. Operating mode 1.3.2. Setting mode 1.4. The display 1.5. Extension options & accessories 2. Installation 2.1. Battery installation 2.1.1. Battery ins...

  • Page 15

    6 en 10. Operation mode selection selecting the operation mode: bike mode or walk mode 11. Operation mode 11.1. Function overview 11.2. Fast pairing after interruption > 15 minutes 11.3. Getting started 11.3.0. The permanent functions in the display 11.3.1. To 11.3.28. Quick overview - functions/ope...

  • Page 16

    7 instruction manual 1.1. General 1.2. Important instructions for the digital wireless system your vdo series z1 works entirely without cable; it works with double digital wireless transmission based on well-established ant+sport® wireless protocol. The ant+sport® wireless protocol has already been ...

  • Page 17

    8 en k 1.3.1. Operation mode - use this mode to display all information button assignment is shown on the housing. Operation mode z1 alti up dist up trip max avg climb max climb total up (1 or 2) alti max (1 or 2) alti down dist down avg down max down total down (1/2) trip dist ride time avg speed m...

  • Page 18

    9 instruction manual 1.3.2. Setting mode - use this mode to make all settings. The assignment of buttons is on the buttons to go to setting mode: press button ç for 3 seconds setting mode z1 or chap. 8.1. Chap. 8.2. Chap. 8.3. Chap. 8.4. Chap. 6.1. Chap. 10. Chap. 5.4. Chap. 7.5. Chap. 3.3. Language...

  • Page 19

    10 en 1.4. The display the display of your vdo computer is comprised of three large areas. The following information is displayed in operation mode: 3. Footer: dot matrix full-text - display of the selected/displayed function - in setting mode menu prompting (chapter 5-8) provides informa- tion abou...

  • Page 20

    11 instruction manual 1.5. Extension options & accessories extension option: you have the possibility of extending your computer with the cadence extension set in this case the following cadence functions are available to you: actual cadence average cadence maximum cadence in addition you can also g...

  • Page 21

    12 en 2.2. Installation - holder/computer/transmitter/magnet a. Holder >>> p04 / 05 : your vdo computer is shipped with a universal handlebar holder. Step 1 you can mount the holder either on the handlebar or the stem. If you are installing the holder on the handlebar decide whether you want it on t...

  • Page 22

    13 instruction manual step 2 ‚ confirm language select with m step 3 ∂ ƒ press the up or down button until the desired langu- age appears step 4 ‚ confirm your language selection with m 3.3.1. Manual pairing - initial operation wireless system for initial operation of the digital wireless system man...

  • Page 23

    14 en important note / re-open of transmitter search for the receive channel after interruption if no signal is received from an already paired transmitter after 15 minutes (for example riding without chest belt for z2 and z3, also pc-link models), the receive channel will be closed for this transmi...

  • Page 24

    15 instruction manual then all values calculated on the basis of this value, such as speed, trip, etc. Will be wrong. To use your vdo computer on two different bikes e.G. Mountain bike and road bike you can enter two different wheel sizes. Measuring the wheel circumference: step 1 align the valve of...

  • Page 25

    16 en wheel size set done display of the actual wheel size in the center bar of the display, right bottom (1 or 2) 5.3. Setting total kilometers you can program the total distances into your vdo computer that get lost when changing batteries or that you have previously counted with a different devic...

  • Page 26

    17 instruction manual ∂ ƒ setting weight ‚ set sex ?Continue? ∂ ƒ setting sex (m = male, f = female) ‚ person data ?Set ok? ‚ person data set done automatic return to operation mode for the selected timer. 7.Power calculation in watt 7.1 setting the basic values for power calculation in watt (option...

  • Page 27

    18 en different weather conditions at the various points of the trip. You should make corrections so that the measurement is as accurate as possible. Tip home altitude: you can obtain the correct information for the altitude of your home lo- cation or your usual trip starting point from your local w...

  • Page 28

    19 instruction manual ∂ ƒ setting the first digit ‚ alti up 1 set done / alti up 2 set done / walk up set done automatic return to the operation mode for total up. Annual uphill altitude gain set done. 8.4. Annual downhill altitude loss bike 1 and bike 2 and walk mode setting the annual downhill alt...

  • Page 29

    20 en ‚ trip data reset done automatic return to operation mode for trip dist 9.2 reset total ride time attention: when resetting total ride time the following data is deleted: - total ride time - total ride time bike 1 - total ride time bike 2 3 sec. √ trip data ?Reset? ∂ ƒ total time ?Reset? ‚ tot...

  • Page 30

    21 instruction manual select operation mode: 3 sec. ç setting mode language select ∂ ƒ op mode select ‚ cycle mode ?Set ok? ∂ to change to walk mode ?Set ok? ‚ automatic return to the operation mode for trip dist (in cycle mode), or alti up (in walk mode) 11. Operation mode 11.1. An overview of mode...

  • Page 31

    22 en this resets all data of the functions marked by l automatic return to operation mode for trip dist note: the minimum altitude change for the correct distance measure- ment must be 1 m 11.3.3. ¬ £ trip max = maximum altitude of the actual trip display ¥ trip max reset: 3 sec. √ trip data ?Reset...

  • Page 32

    23 instruction manual display ¥ „dschn down“ reset: 3 sec. √ trip data ?Reset? ‚ trip data ?Reset? > flashing ‚ trip data reset done this resets all data of the functions marked by l automatic return to operation mode for trip dist 11.3.11. ¬ max down = maximum downhill gradient in percent display ¥...

  • Page 33

    24 en reset: 3 sec. √ trip data ?Reset? ‚ trip data ?Reset? > flashing ‚ trip data reset done l automatic return to operation mode for trip dist maximum value 120 km/h or mph. Accuracy 2 decimal places. Not suitable for motorcycles. Option only with cadence extension 11.T1. ¬ cad avg = average caden...

  • Page 34

    25 instruction manual display √ odototal maximum value 199,999 km or mi 11.3.22. ¬ time bike 1 = total time bike 1 shows the total time of all day trips ridden with bike 1 in hhh:mm display √ time bike 1 maximum value 999:59 hhh:mm 11.3.23. ¬ time bike 2 = total ride time bike 2 shows the total time...

  • Page 35

    26 en 12. Riding with the navigator with the vdo navigator you can complete trips according to roadbooks (e.G. Moser guide). Roadbooks are offered by many publishing houses for fantastic trips (for road bikes as well as mountain bikes) by many publishing houses. Taking a specified trip is facilitate...

  • Page 36

    27 instruction manual training. Timer 2 counts from zero forward. At the end of timer 2 there are two beeps. Timer 2 only functions if you have set a time. If you have forgotten to set a time your vdo computer displays timer error timer 1+2 runs until you stop these functions. Timers 1 + 2 only func...

  • Page 37

    28 en ‚ timer ?Set ok? ‚ timer set done automatic return to the operation mode for timer 1/2. If you have not yet set any values for timer 1, and/or timer 2, then your vdo computer will now show error in the display. 13.3. Setting timer 1 + 2 repeats (when selecting timer 1 + 2) 3 sec. ç setting mod...

  • Page 38

    29 instruction manual now the display shows temperature, time, date, and day of the week. .After an additional 10 minutes the second phase of sleep mode will be activated, the receiver will be switched off. For wake up press any button. 15. Troubleshooting here is a list of possible errors, their ca...

  • Page 39

    30 en no cadence display - check the magnet position (distance between magnet and transmitter, position of the magnet to the transmitter point on the transmitter) - check the battery in the transmitter - check the battery in the computer (if battery voltage is insufficient then the receiver cannot r...

  • Page 40

    31 instruction manual 16. Guarantee conditions vdo cycle parts offers a 5-year guarantee on your vdo computer, starting from date of purchase. The guarantee extends to material and manufacturing defects on the computer itself, on the docking station, on the transmitters and on the handlebar and wris...

  • Page 41

    #56'.'%64+%#..'%6410+%37+2/'06 22.+%#$.'+06*'7412'#00+10#0&16*'47412'#0%17064+'59+6*5'2#4#6'%1..'%6+105;56'/5*+5/#4-+0)5*190106*' 241&7%614+65.+6'4#674'+0&+%#6'56*#6+65*17.&016$'&+5215'&9+6*16*'4*175'*1.&9#56'5#66*''0&1(+65914-+0).+(' 124'8'062155+$.'*#4/616*''08+410/'0614*7/#0*'#.6*(41/70%10641..'&...

  • Page 42

    24' #4%#,'.'&'2'#%'56241&755#7/'0g+10#6'o0+05647%g+70+.'5#.'&'(1.15+4'+0&+%i(#267.%i241&757.0764'$7+'#470%#6 o/24'70i%7#.6'4' &i70i61#4'#5724#/'&+7.7+o0%10,74i6145#7#5i0i6ig++1#/'0+.14ɦ#6''8#%7i4++0'%10641.#6'#4' 5'2#4#g+#%'56241&75&'#.6'6+274+&'4' 6+.+ #24+/++0(14/#g++%724+8+4'.#.1%7.H+/1&7.O0%#4'2...

  • Page 43

    4+=76+'.'664+%+'&'.'66410+%+ 22.+%#$+.'+0+2#'5+&'.."0+10'7412'#'+037'..+%105+56'/#&+4#%%1.6#&+(('4'0 57#&1%7/'06# '8+6#4''8'067#.++#.."#/$+'06'1#..#5#.76'%#75#6+.."+01221467015/#.6+/'061&'+4+=76+5++08+6#."76'06'#5'2#4#4' 37'561241&1661#.64+6+2+&+4+=76+'&+4+%+%.#4.1+0/#0+'4#4'52105#$+.'2'4(#814+4'+.4...

  • Page 44

    % ', '.'-64+.+56',#'.'-64110+.+56'5'#&/'6',ff6/'& '..+0'6f*+56756116'.8t+5'..'&1-7/'06+&'.0f+6#$'6611&'6'+61*+-#57675#,#.T22'/+5'.-t48#.-115/77&'1./',ff6 /'6')#'..'-5'68f.6+,ff6/'6'-10641..+/#67-t48#./+5')#5'167&8t+/#.+-7-#*,76'-+6#/+56-'5--100#.'8t++0+/'56' 6'48+5'.'0+0)'&'0/#6'4+##.5'6'8#*'0&+6'5f...

  • Page 45

    #11# 0-01.+'616#5'.'-64+5-c570'.'-6410+5-c5+'4b%'5 #6-4+67/+'/2`%6c'-52.7#6c%+,#5.#+-##+0'8`45678+&'+70%+.8`-78'5'.B$#++'52`,#/1-#+6`,7/7-#5+45#+56b65#4 0'-10641.`,#/7#6-4+67/7.+-8+&`u#076#5,c01ua+401%+6+'/#6-4+67/+'/70,c2c4564c&c.#+5'-/`67/#6'4+c.14'57457 #6$+.&b)7#6-c46167.+'61u#07c,5#+/0+'%b$#5.+...

  • Page 46

    )('5n&71&'37+2#/'0615.K%64+%15'.'%64q0+%15 56#/#4%##24'5'06#ә&761170#57#.+6'4#674#+0&+%#37''.'0i1&'8'4d5'4'.+/+0#&1,706#/'06'%1/154'5n&715 &1/k56+%15+0&+('4'0%+#&1501=0#.&15'72'4n1&1&'8+v6+.#4#+/2'&+4#1#/$+'06''g5#v&'*7/#0#%#75#&15 2'.#'.+/+0#ji1+0%10641.#&'4'5n&715&'8'4d5'2#4#4'56''37+2#/'061&'1764...

  • Page 47

    # #1&2#&0#'.'-64+u0#+0'.'-64105-#124'/# 1&564#0,'8#0,#1&2#&-18+ 21018017214#$1/#6'4+#.0+*8+418214#$0+-+8)1521&+0,568+*0#, 1-1.,78#4014'%+-.+4#0,'21-.+u',164)18+01-,'451+ 21)1,'0#$#80'21)1&$'')#+ .&4'#.#/*'+%64'#%*#)75'+%64'10#%*4#/*#n1.# k+4n100#0/*#4%d+.5'1#6d#4#06d+4)'0q5#.+64n1%*6#6*#)#00.'+50d4%...

  • Page 48

    D eu-konformitätserklärung wir, cycle parts gmbh, grosse ahlmuehle 33, d-76865 rohrbach erklären, dass die vdo fahrradcompu- ter mit funkübertragung vdo z1, z2, z3, z2 pc-link, z3 pc-link und alle sender z-cad, z-pulse, z-sender, dockingstation bei bestimmungsgemäßer verwendung den grundlegenden anf...

  • Page 49

    66023 66023 addendum to user manual usa cdn notice: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...

  • Page 50

    6604 6604 addendum to user manual usa cdn notice: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...

  • Page 51

    F o r r u n n i n g / h i k i n g v d o s e r i e s - z w w w. V d o c y c l e c o m p u t i n g . C o m cyclecomputing.