1. DL manuals
  2. VDO Cyclecomputing
  3. Bicycle Accessories
  4. Z2
  5. Instruction Manual

VDO Cyclecomputing Z2 Instruction Manual

Other manuals for Z2: Instruction Manual
Manual is about: VDO SERIES-Z

Summary of Z2

  • Page 1

    I n s t r u c t i o n m a n u a l / b e d i e n u n g s a n l e i t u n g / m a n u e l d ´ i n s ta l l at i o n e t d ´ u t i l i s at i o n / h a n d l e i d i n g / m a n u a l e d ´ i n s ta l l a z i o n e e f u n z i o n a m e n t o i n s t r u k c j a o b s l u g i l i c z n i k a / i n s ta...

  • Page 2

    My settings ✍ age: weight: limit 1: low: high: limit 2: low: high: limit 3: low: high: recovery pulse: recovery time: bike 1 weight: bike 2 weight: bike 2 wheelsize: bike 1 wheelsize: home altitude: bike 1 service intervall: bike 2 service intervall: max heartrate: further settings:.

  • Page 3

    Picturebook * watch out: old batteries require special disposal please read instructions for end-off-life disposal treatment p01 8x * cd-rom pc-sport only for models z2 pc-link / z3 pc-link.

  • Page 4

    Picturebook picturebook open close open close ! Open close ! P02.

  • Page 5

    Picturebook open close ! P03 only for models z2/z2 pc-link z3/z3 pc-link.

  • Page 6

    Picturebook 90° p04/05.

  • Page 7

    Picturebook p06 unlock lock 1.Lock 2.Click 2.Unlock.

  • Page 8

    Picturebook p07 1-5 mm.

  • Page 9

    Picturebook p08 only for models z2/z2 pc-link z3/z3 pc-link.

  • Page 10

    Picturebook open close p09 p09-2.

  • Page 11

    Picturebook ws in mm / inch 1x tire size ws in mm kmh ws in inch mph 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2055 80,9 50-559 26x1,9 2060 81,1 n/a 26 x 1,...

  • Page 12

    Picturebook p11 only for models z2 pc-link z3 pc-link.

  • Page 13

    4 en congratulations with your selection of a vdo z2 pc-link you have opted for high-quality sports information computer. In order to fully benefit from the potential of the computer, we recommend that you carefully read this manual. It contains all operating instructions and many useful tips. We ex...

  • Page 14

    5 instruction manual table of contents 1.1. General 1.2. Important instructions for the digital wireless system 1.3. Control system - operation 1.3.1. Operating mode 1.3.2. Setting mode 1.4. The display 1.5. Extension options & accessories 2. Installation 2.1. Battery installation 2.1.1. Battery ins...

  • Page 15

    6 en 8. Reset mode 8.1. Resetting trip data 8.2. Reset total ride time 8.3. Resetting the total distance meter 8.4. Resetting the navigator 8.5. Resetting to factory settings (ac button) 9. Operation mode selection selecting the operation mode: bike mode or walk mode 10. Operation mode 10.1. Functio...

  • Page 16

    7 instruction manual 1.1. General 1.2 important instructions for the digital wireless system your vdo z2 pc-link works entirely without cable; it works with triple digital wireless transmission based on well-established ant+sport® wireless protocol. The ant+sport® wireless protocol has already been ...

  • Page 17

    8 en k 1.3.1. Operation mode - use this mode to display all information button assignment is shown on the housing. Operation mode z2 pc-link trip dist ride time avg speed max speed cad avg cad max clock navigator odo bike 1 odo bike 2 odototal time bike1 time bike2 totaltime timer avg pulse max puls...

  • Page 18

    9 instruction manual 1.3.2. Setting mode - use this mode to make all settings. The assignment of buttons is on the buttons to go to setting mode: press button ç for 3 seconds setting mode z2 pc-link or chap. 6.1. Chap. 9. Chap. 5.4. Chap. 3.3. Chap. 14.1. Language select navigator set wheelsize set ...

  • Page 19

    10 en 1.4. The display the display of your vdo computer is comprised of three large areas. The following information is displayed in operation mode: 3. Footer: dot matrix full-text - display of the selected/displayed function - in setting mode menu prompting (chapter 5-11) provides informa- tion abo...

  • Page 20

    11 instruction manual 1.5. Extension options & accessories extension option: you have the possibility of extending your computer with the cadence extension set in this case the following cadence functions are available to you: actual cadence average cadence maximum cadence in addition you can also g...

  • Page 21

    12 en 2, and the altitude difference walked. Reprogram this information after inserting the new batteries. 2.1.2 battery installation pulse-chest belt >>> p03 your vdo is shipped with the battery installed in the pulse-chest belt. Proceed as follows when later inserting a replacement battery: step 1...

  • Page 22

    13 instruction manual 2.3. Putting on the pulse-chest belt >>> p08 step 1 first connect the one side of the pulse transmitter with the elastic strap, as shown. Press the ends of the pulse-chest belt into the plastic holder of the elastic strap step 2 place the pulse transmitter just below your chest...

  • Page 23

    14 en ensure that the electrodes of the pulse transmitter belt are wet, or that the distance between the magnets and the speed/cadence transmitter is not greater than 5 mm. Attention: your computer can save the codes of up to 5 transmitters 1. Speed transmitter of bike 1 2. Speed transmitter of bike...

  • Page 24

    15 instruction manual important note / re-open of transmitter search for the receive channel after interruption if no signal is received from an already paired transmitter after 15 minutes (for example riding without chest belt for z2 and z3, also pc-link models), the receive channel will be closed ...

  • Page 25

    16 en etc. Will be wrong. To use your vdo computer on two different bikes e.G. Mountain bike and road bike you can enter two different wheel sizes. Measuring the wheel circumference: step 1 align the valve of the front wheel so that it is precisely vertical to the ground step 2 mark this point on th...

  • Page 26

    17 instruction manual wheel size set done display of the actual wheel size in the center bar of the display, right bottom (1 or 2) 5.3. Setting total kilometers you can program the total distances into your vdo computer that get lost when changing batteries or that you have previously counted with a...

  • Page 27

    18 en if you know it from earlier measurements (e.G. At the doctor‘s office or from a performance test). If you do not know it then you can select automatic calculation of your maximum pulse. Warning: automatic calculation is based on average values for people that are athletic and healthy. The actu...

  • Page 28

    19 instruction manual 7.Pulse function settings the pulse functions of your vdo computer are based on the specifica- tion of three training programs each with 3 training ranges. Limit 1 = program 1: for recovery training (high 70%, low 50% of max. Pulse) limit 2 = program 2: program for endurance tr...

  • Page 29

    20 en 7.3. Select training program 3 sec. ç setting mode language select ∂ ƒ pulse limit settings ‚ pulse limit ?Set? ∂ pulse limit ?Select? ‚ limit 1 ?Select? Or ∂ limit 2 ?Select? Or ∂ limit 3 ?Select? ‚ limit 1/2/3 set done automatic return to operation mode for the selected timer. The selected t...

  • Page 30

    21 instruction manual 8.1 trip data attention: when resetting the trip data the following day trip data will be deleted: - daily distance - trip ride time - average speed - maximum speed if the cadence option is mounted then the cadence data will also be reset. - average cadence - maximum cadence 3 ...

  • Page 31

    22 en step 1 use a sharp pencil step 2 press the ac button on the back of the computer for 2 sec reset to factory settings done. 9. Operation mode selection your vdo computer uses different measuring and analysis programs for different sport types. Certain functions are not available depending on th...

  • Page 32

    23 instruction manual bicycle functions (button ç ) with the exception of the clock function no bicycle functions are available in walk mode. The ç button has no function in walk mode. 10.3.1. ¬ trip distance = distance of the actual trip display ç trip distance reset: 3 sec. √ trip data ?Reset? ‚ t...

  • Page 33

    24 en bicycle functions (button √ ) important note: no bicycle functions except the clock function are available in walk mode. The √ button in walk mode automatically shows the actual time. 10.3.5. Clock setting, see chapter 4.2. (either in 12h or 24h format; in 12h format am/pm will be shown as wel...

  • Page 34

    25 instruction manual 10.3.13. ¬ £ stopwatch = manual stopwatch prerequisite: only after selecting stopwatch, chapter 12.1. Display ≈ stopwatch start measuring ∫ press stop measuring ∫ press display pulse data ≈ limit lo hi (values run sequen- tially, automatically in 2 second rhythm) reset: ∫ press...

  • Page 35

    26 en 10.3.18. ¬ £ max pulse = maximum pulse of the actual timing period prerequisite: capture only with running or stopped and not deleted stopwatch/timer/countdown/lap timer function displaying the information ≈ max pulse reset: ∫ press button for 4 sec. 10.3.19. ¬ £ pulse max % = pulse as a perce...

  • Page 36

    27 instruction manual 11. Riding with the navigator with the vdo navigator you can complete trips according to roadbooks (e.G. Moser guide). Roadbooks are offered by many publishing houses for fantastic trips (for road bikes as well as mountain bikes) by many publishing houses. Taking a specified tr...

  • Page 37

    28 en timer 1: you can program a time e.G. For interval training. Timer 1 counts from zero forward. At the end of timer 1 there is a single beep. Timer 1 only functions if you have set a time. If you have forgotten to set a time your vdo computer displays timer error timer 2: you can program a time,...

  • Page 38

    29 instruction manual ‚ timer ?Select? ∂ timer ?Set? ‚ timer 1 ?Set? ∂ timer 2 ?Set? Select ‚ timer ?Set? ‚ set hour ?Continue? ∂ ƒ setting hours (keep button depressed for fast run- through) ‚ set minutes ?Continue? ∂ ƒ setting minutes (keep button depressed for fast run- through) ‚ set seconds ?Co...

  • Page 39

    30 en 12.5. Lap-timer the lap timer must first be started with the ∫ button. To save the lap data press buttons ≈ + ¥ at the same time on the desired points of the training unit. In this process the following values will be saved: - duration of the lap - average heart rate on the lap - average speed...

  • Page 40

    31 instruction manual tip: at the end of the training unit measure the recovery time or the recovery pulse to determine your training status. See 7.4. Recovery time and recovery pulse note: all bicycle altitude and pulse function can also be called up during timer operation via the ç √ ¥ ≈ buttons. ...

  • Page 41

    32 en 13.3. Training with the countdown timer: the countdown timer is a programmable timer with reverse counting. This is particularly well-suited for use in time trials. At the end of the countdown time there is a single beep. Important: during countdown operation the residence periods of the pulse...

  • Page 42

    33 instruction manual display in recall mode after concluding the measurement. 2. If the lap timer is running the residence period of the pulse frequency in the selected training ranges is recorded (compare 12.1) step 1 preparing the recording: - set the training ranges automatically chapter 7.1, or...

  • Page 43

    34 en 14. The data recording function & transfer of data to the pc your vdo computer is designed for recording data and transferring data to your pc. The recorded and transferred data can be analyzed on the pc. With the „pc-sport“ software you can keep a training journal, track developments over cer...

  • Page 44

    35 instruction manual tip: leave your vdo computer on the handlebar holder so that sleep mode is activated and recording is interrupted automatically after 5 minutes (see chapter 15 sleep mode). Attention: if you manually interrupt data recording, for a break for ex- ample by pressing ≈ + ç , then a...

  • Page 45

    36 en 15. Sleep mode your vdo computer has a two-stage sleep mode. Sleep mode is activa- ted automatically if the computer no longer receives data. Phase 1 after 5 minutes: - the display goes into sleep mode - data recording is interrupted now the display shows time, date, and day of the week. For w...

  • Page 46

    37 instruction manual no speed display - check the magnet position (distance between magnet and transmitter, position of the magnet to the transmitter point on the transmitter) - check the battery in the transmitter - check the battery in the computer (if battery voltage is insufficient then the rec...

  • Page 47

    38 en no pulse percentage of the personal maximum pulse personal data has not been set, timer has not been started no data relative to training times is in the set training ranges timer has not been started. Start timer calorie display does not function personal data has not been set, timer has not ...

  • Page 48

    39 instruction manual 17. Guarantee conditions vdo cycle parts offers a 5-year guarantee on your vdo computer, starting from date of purchase. The guarantee extends to material and manufacturing defects on the computer itself, on the docking station, on the transmitters and on the handlebar and wris...

  • Page 49

    269 instalacion y operaciÓn manual 18. Especificaciones tecnicas ciclocomputador: aproximadamente 49,6 x 46,6 x 16,5mm, peso: aproximadamente 45g soporte manillar: peso aproximado 15g transmisor de velocidad: peso aproximado 20g transmisor de pulso: peso aproximado 80 g baterías: 3v, tipo 2032 (cicl...

  • Page 50

    #56'.'%64+%#..'%6410+%37+2/'06 22.+%#$.'+06*'7412'#00+10#0&16*'47412'#0%17064+'59+6*5'2#4#6'%1..'%6+105;56'/5*+5/#4-+0)5*190106*' 241&7%614+65.+6'4#674'+0&+%#6'56*#6+65*17.&016$'&+5215'&9+6*16*'4*175'*1.&9#56'5#66*''0&1(+65914-+0).+(' 124'8'062155+$.'*#4/616*''08+410/'0614*7/#0*'#.6*(41/70%10641..'&...

  • Page 51

    24' #4%#,'.'&'2'#%'56241&755#7/'0g+10#6'o0+05647%g+70+.'5#.'&'(1.15+4'+0&+%i(#267.%i241&757.0764'$7+'#470%#6 o/24'70i%7#.6'4' &i70i61#4'#5724#/'&+7.7+o0%10,74i6145#7#5i0i6ig++1#/'0+.14ɦ#6''8#%7i4++0'%10641.#6'#4' 5'2#4#g+#%'56241&75&'#.6'6+274+&'4' 6+.+ #24+/++0(14/#g++%724+8+4'.#.1%7.H+/1&7.O0%#4'2...

  • Page 52

    4+=76+'.'664+%+'&'.'66410+%+ 22.+%#$+.'+0+2#'5+&'.."0+10'7412'#'+037'..+%105+56'/#&+4#%%1.6#&+(('4'0 57#&1%7/'06# '8+6#4''8'067#.++#.."#/$+'06'1#..#5#.76'%#75#6+.."+01221467015/#.6+/'061&'+4+=76+5++08+6#."76'06'#5'2#4#4' 37'561241&1661#.64+6+2+&+4+=76+'&+4+%+%.#4.1+0/#0+'4#4'52105#$+.'2'4(#814+4'+.4...

  • Page 53

    % ', '.'-64+.+56',#'.'-64110+.+56'5'#&/'6',ff6/'& '..+0'6f*+56756116'.8t+5'..'&1-7/'06+&'.0f+6#$'6611&'6'+61*+-#57675#,#.T22'/+5'.-t48#.-115/77&'1./',ff6 /'6')#'..'-5'68f.6+,ff6/'6'-10641..+/#67-t48#./+5')#5'167&8t+/#.+-7-#*,76'-+6#/+56-'5--100#.'8t++0+/'56' 6'48+5'.'0+0)'&'0/#6'4+##.5'6'8#*'0&+6'5f...

  • Page 54

    #11# 0-01.+'616#5'.'-64+5-c570'.'-6410+5-c5+'4b%'5 #6-4+67/+'/2`%6c'-52.7#6c%+,#5.#+-##+0'8`45678+&'+70%+.8`-78'5'.B$#++'52`,#/1-#+6`,7/7-#5+45#+56b65#4 0'-10641.`,#/7#6-4+67/7.+-8+&`u#076#5,c01ua+401%+6+'/#6-4+67/+'/70,c2c4564c&c.#+5'-/`67/#6'4+c.14'57457 #6$+.&b)7#6-c46167.+'61u#07c,5#+/0+'%b$#5.+...

  • Page 55

    )('5n&71&'37+2#/'0615.K%64+%15'.'%64q0+%15 56#/#4%##24'5'06#ә&761170#57#.+6'4#674#+0&+%#37''.'0i1&'8'4d5'4'.+/+0#&1,706#/'06'%1/154'5n&715 &1/k56+%15+0&+('4'0%+#&1501=0#.&15'72'4n1&1&'8+v6+.#4#+/2'&+4#1#/$+'06''g5#v&'*7/#0#%#75#&15 2'.#'.+/+0#ji1+0%10641.#&'4'5n&715&'8'4d5'2#4#4'56''37+2#/'061&'1764...

  • Page 56

    # #1&2#&0#'.'-64+u0#+0'.'-64105-#124'/# 1&564#0,'8#0,#1&2#&-18+ 21018017214#$1/#6'4+#.0+*8+418214#$0+-+8)1521&+0,568+*0#, 1-1.,78#4014'%+-.+4#0,'21-.+u',164)18+01-,'451+ 21)1,'0#$#80'21)1&$'')#+ .&4'#.#/*'+%64'#%*#)75'+%64'10#%*4#/*#n1.# k+4n100#0/*#4%d+.5'1#6d#4#06d+4)'0q5#.+64n1%*6#6*#)#00.'+50d4%...

  • Page 57

    D eu-konformitätserklärung wir, cycle parts gmbh, grosse ahlmuehle 33, d-76865 rohrbach erklären, dass die vdo fahrradcompu- ter mit funkübertragung vdo z1, z2, z3, z2 pc-link, z3 pc-link und alle sender z-cad, z-pulse, z-sender, dockingstation bei bestimmungsgemäßer verwendung den grundlegenden anf...

  • Page 58

    66023 66023 addendum to user manual usa cdn notice: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...

  • Page 59

    6604 6604 addendum to user manual usa cdn notice: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...

  • Page 60

    F o r r u n n i n g / h i k i n g v d o s e r i e s - z w w w. V d o c y c l e c o m p u t i n g . C o m cyclecomputing.