1. DL manuals
  2. VDO CYTEC
  3. Bicycle Accessories
  4. C 15
  5. Installation And Operation Manual

VDO CYTEC C 15 Installation And Operation Manual

Summary of C 15

  • Page 1

    English page 1-20 deutsch seite 21-40 français page 41-60 italiano pagine 61-80 español pagina 81-100 nederlands pagina 101-120 gb c15 d c15 f c15 i c15 e c15 nl c15.

  • Page 2

    Etrto ws in mm kmh ws in inch mph 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2070 81,5 50-559 26x1,9 2089 82,2 54-559 26x2,00 2114 83,2 57-559 26x2,125 2133 ...

  • Page 3

    Screw gb c 15 1 installation and operation manual - vdo cytec c 15 preface thank you for buying a vdo cytec bicycle computer. The more familiar you get with this model, the more enjoyable your trips are going to be. Please read thoroughly all the information provided in this manual. You are getting ...

  • Page 4

    Gb c 15 2 2. Mounting the speed transmitter the sensor should be mounted on the same side of the fork as the holder is on the handlebar. Watch out: do not tighten the cable ties yet! Accurately position the spoke magnet and the sensor first, then tighten the cable ties. 3. Mounting the spoke magnet ...

  • Page 5

    1-5mm 1-5mm 1.Lock 2.Click 1.Press 2.Unlock lock unlock gb c 15 3 in case this distance is not achievable in the current positioning, slide the sensor and the magnet on the fork or spoke accordingly. 4. Twist-click mounting of computer onto holder the twist-click mounting has been exclusively develo...

  • Page 6

    Open close gb c 15 4 5. Installing battery into computer head to save battery power, your vdo cytec comes with the battery not yet fitted. Prior to initial use you have to install the battery first. If you find the computer is not functioning properly after a battery change, push the ac-button (auto...

  • Page 7

    Gb c 15 5 6. Information features of your vdo cytec c 15 your vdo cytec c 15 provides you with following information: kmh-mph current speed indicated in either kmh or mph, featuring automatic conversion into mph trp trip counter, counts your trip distance up to 999,99 km or miles. Rid trip timer, ke...

  • Page 8: Function

    Function trp rid avs stp max mode 1 function tcnt clk tot odo1 odo2 totodo mode 2 ss function stp-start/stop gb c 15 6 7. Operating your vdo cytec c 15 button / key covering your vdo cytec c 15 has 3 buttons / keys mode 1, mode 2 and ss.

  • Page 9

    Gb c 15 7 these buttons / keys have several functions. All functions of the respective buttons / keys outlined in the following chart below. Your display in button / key length of what is going on? Dicates following to be pushed pushing the information button / key trp-avs-rid- mode 1 brief (0.1 sec...

  • Page 10

    Scroll press mode 1 1,5 sec. Start scroll press mode 2 5sec. Reset gb c 15 8 8. Scroll function to provide any information at a glance, your vdo cytec c 15 features a scroll function. Calling up the scroll function automatically displays information for a period of 1.5 sec. Scroll function may be ca...

  • Page 11

    Ss start/stop press mode 2 5sec. Reset gb c 15 9 10. Manual stop-watch stp your vdo cytec c 15 features a manual stop-watch.With information stp being displayed, you may operate your stop-watch with the ss-button. Ss press when stp is displayed = starting the stop-watch ss press again = interrupt th...

  • Page 12

    To aktivate to deactivate mode 1 +mode 2 your current speed is faster than your average speed. Accuracy +/- 1 kmh/mph you are currently riding as fast as your average speed. Accuracy +/- 1 kmh/mph your current speed is slower than your average speed. Accuracy +/- 1 kmh/mph activating the freeze-func...

  • Page 13

    Gb c 15 11 13. Set-up mode your vdo cytec c 15 features the following set-up procedures wheelsize 1 = ws1 set-up starts out of trp in display wheelsize 2 = ws2 set-up starts out of trp in display clock = clk set-up starts out of clk in display odometers = odo1,odo2 set-up starts out of odo1, odo2 in...

  • Page 14

    Ws in mm / inch 1x gb c 15 12 15. Entering your wheelsize you may enter two different wheelsizes into your vdo cytec c 15, i.E. One wheelsize for your street bike and another one for your mountain bike. Your vdo cytec identifies different wheelsizes as ws 1 = wheelsize 1 and ws 2 = wheelsize 2. Foll...

  • Page 15

    Gb c 15 13 programming (setting up) your wheelsize step 1: call trp information in your display. Step 2: press mode 1 button for 5 sec. "ws1" is displayed along with an alternating flashing symbol for kmh and mph. Step 3: by pressing the mode 2 button you can choose whether you want mph or kmh reado...

  • Page 16

    Mode 2 0,1sec. To change from kmh to mph mode 2 0,1sec. To increase mode 1 5sec. Mode 1 5sec. To quit mode 1 0,1sec. Switch to next mode 1 0,1sec. Switch to next mode 1 0,1sec. Switch to next mode 1 0,1sec. Switch to next mode 2 to increase to change from kmh to mph mode 1 to start to switch to quit...

  • Page 17

    Mode 2 0,1sec. Mode 2 mode 1 0,1sec. Switch to next mode 2 0,1sec. To increase mode 1 0,1sec. Switch to next mode 1 5sec. To quit mode 1 5sec. To start mode 1 0,1sec. Switch to next gb c 15 15 16. Setting the clock clk your vdo cytec c 15 features a clock with hour and minute display. 12 h or 24 h d...

  • Page 18

    Mode 1 5sec. To quit mode 1 0,1sec. Switch to next mode 2 0,1sec. To increase start mode 1 5sec. Gb c 15 16 17. Programming (setting-up) your odometers odo1 / odo2 you can enter individual odometer values into your vdo cytec c 15 at any time, i.E. Transferring data from your old computer into your n...

  • Page 19

    Gb c 15 17 18. Resetting information to zero the following information may be reset to zero with your vdo cytec c 15. Trp-rid-avs-max these information here is simultaneously reset to zero. Tcnt this information is singly reset to zero. Tot this information is singly reset to zero. Stp this informat...

  • Page 20

    Hg gb c 15 18 malfunction possible cause solutions irregular lcd readout (i.E. After battery change) speed display does not appear check for proper distance between sensor and magnet cable from sensor to computer broken check cable and replace if necessary computerhead is incorrectly twisted on plac...

  • Page 21

    Gb c 15 19 22. Warranty we warrant vdo cytec models (sensor, computer head and handlebar holder) to the original purchaser for five years from date of purchase against defects in material and workmanship. This does not cover the batteries and defects resulting from normal wear and tear, improper car...

  • Page 22

    20