1. DL manuals
  2. Vdwall
  3. Processor
  4. ledsync820h
  5. User Manual

Vdwall ledsync820h User Manual

Manual is about: LED HD Video Processor

Summary of ledsync820h

  • Page 1

    Lvp615u led hd video processor user manual v1.0

  • Page 2

    Lvp615u 使用说明 2 contents chapter 1: safety precautions -------------------------------------------------- 4 chapter 2: item list -------------------------------------------------------------------- 5 chapter 3: hardware connection 3.1 rear view-------------------- ------------------------------------...

  • Page 3

    Lvp615u 使用说明 3 chapter 7: remote control instructions 7.1 hardware communication-------------------------------------------------- 48 7.1.1 rs232 and usb-------------------------------------------------------------- 49 7.1.2 wired network--------------------------------------------------------------...

  • Page 4

    Lvp615u 使用说明 4 chapter 1: safety precautions ！ danger there is high voltage in the processor, to prevent any unexpected hazard, unless you are maintenance, please do not open the cover of the device. ！ warning 1. This device shall not encounter water sprinkle or splash, please do not place anything ...

  • Page 5

    Lvp615u 使用说明 5 8. Please immediately unplug power cord and have the device repaired, when 1) liquid splashes to the device. 2) the device is dropped down or cabinet is damaged. 3) obvious malpractice is found or performance degrades. Chapter 2 item list please unpack the product carefully, then chec...

  • Page 6

    Lvp615u 使用说明 6 chapter 3 hardware connection 3.1 rear view 1 3 5 2 4 4 3.2 ports description 3.2.1 video signal inputs (input) lvp615u supports 8 video signals input as follows: port description.

  • Page 7

    Lvp615u 使用说明 7 v1 1*composite video (pal/ ntsc) v2 / ypbpr 1* composite video (pal/ ntsc) or analog component video input vga1~vga2 2 * pc analog signal dvi 1* dvi ( pc digital signal) hdmi 1*hdmi (hd digital signal) dp 1*displayport( digital signal input) ext. 1* extended pal/ntsc composite video i...

  • Page 8

    Lvp615u 使用说明 8 3.2.4 other ports port description lan tcp/ip local area network control interface usb usb communication port rs232 in serial communication interface, used to connect the rs232 port of pc to realize pc software control. Rs232 loop serial communication cascading output for connecting t...

  • Page 9

    Lvp615u 使用说明 9 3.4 specifications.

  • Page 10

    Lvp615u 使用说明 10 inputs nums / type 2×video 1×ypbpr 2×vga （ rgbhv ） 1×dvi （ vesa /cea-861 ） 1×hdmi （ vesa /cea-861 ） 1×dp （ vesa ） 1*ext ( usb) video system pal/ntsc composite video amplitude impedance 1v （ p_p ） / 75Ω vga format pc （ vesa standard ） ≤2048×1152_60hz vga amplitude impedance r 、 g 、 b ...

  • Page 11

    Lvp615u 使用说明 11 picture format jpg 、 png 、 bmp ， max resolution 15million. Input connectors video ： bnc ypbpr ： bnc×3 vga ： 15pin d_sub(female) dvi ： 24+1 dvi_d hdmi ： hdmi port a type dp ： display port usb:usb a type vga/dvi format 1024×768_60hz/75hz 1280×1024_60hz/75hz 1600×1200_60hz 1920×1080p_50...

  • Page 12

    Lvp615u 使用说明 12 3.5 product dimensions product size 483(l) x 274(w) x 66.6(h)mm weight g.W. ： 5.7 kg, n.W. ： 4.2kg.

  • Page 13

    Lvp615u 使用说明 13 rs232 cable order ：.

  • Page 14

    Lvp615u 使用说明 14 chapter 4 front panel and remote control instructions lvp615u supports front panel button, remote control, rs232 and lan control. Same printing on remote control buttons and front panel buttons,same button functions. The instructions are as below. 4.1 front panel buttons and remote c...

  • Page 15

    Lvp615u 使用说明 15 1 4.1.1input signal selection buttons （ , , , , , , , ， ） ： select the input signal. 4.1.2 setup buttons( , ， , , ), set the output image parameters. 4.1.3 vga auto adjustment button ( )automatically adjust the vga input signal. 4.1.4 switching time setup button （ ）： select seamless ...

  • Page 16

    Lvp615u 使用说明 16 4.1.5 pc signal bypass output ( ) ： switch between part and full display of pc signal. The indicator shows the current state of the input signal. 4.1.6 pip/pbp keys （ ， ， ， ） ： :pip/pbp turn on/ off button. When the indicator is on, press input signal selection to choose different gr...

  • Page 17

    Lvp615u 使用说明 17 4.2 remote control operation instructions 4.2.1 open the battery compartment on the back of the remote control, make sure the battery effective contact 4.2.2 please aim remote control to the sensor area of lvp615u, if there is obstacle between them, lvp615u may not receive command. 4...

  • Page 18

    Lvp615u 使用说明 18 5.1 input signals selection lvp615u supports two signal switching methods including“ one key switching ”and“ pre.+take switching ”. The switching method can be set in user setup menu “2.6 switch mode”. “ one key switch ” is default method. One key switch to new input signal through i...

  • Page 19

    Lvp615u 使用说明 19 input signal selection as follows ： buttons description 1* composite video signal input (pal/ ntsc) 1* composite video (pal/ ntsc) or analog component video input 2 * pc analog signal input 1*dvi digital signal input 1 * hdmi digital signal input 1* displayport digital signal input *...

  • Page 20

    Lvp615u 使用说明 20 input： hdmi in status： 1080p_60hz -------------------------------------- output size： 1920x1080 output start： （0，0） -------------------------------------- switch mode： one key sw. Switch time： 1.5 sec after select input signal, the first line on the lcd display the current input sign...

  • Page 21

    Lvp615u 使用说明 21 curr. Input： hdmi curr. In status： 1080p_60hz pre. Input： v1 pre. In status： pal -------------------------------------- output size： 1920x1080 output start： （0，0） switch mode： pre.+take sw. Switch time： 1.5 sec switching signal method: press input button to preselect first, lcd scree...

  • Page 22

    Lvp615u 使用说明 22 in the signal switching status, press c/f button continually can change the current seamless switching transition time. Lvp615u can achieve seamless switching between any two different input groups of four input groups. Switching effect includes seamless switching (0s), fade in/ fade...

  • Page 23

    Lvp615u 使用说明 23 5.2 pip/pbp operation lvp615u allows to insert pip window on the current display signal. That is dual image display function(pip/pbp) 。 pip signal can be any input signal from other input groups or current input signal itself. （ signal group refer to page 19 signal group list ） dual ...

  • Page 24

    Lvp615u 使用说明 24 switch pip/pbp mode ： when pip/pbp is on ， press buttons m1 、 m2 、 m3 directly to select display mode fast. 5.3 mosaic operation multiple units lvp615u cascading can drive huge resolution led screen. Only when the current input is dvi, press mosaic button and the indicator is on. Lvp...

  • Page 25

    Lvp615u 使用说明 25 5.4 other basic user operation 5.4.1 brightness selection （ brt+ ， brt- ） lvp615u supports 64 level or 100 level brightness selection. According to“8.5 bright level” selection ， adjustment range has two kinds ： 0~64 or 0-100. Factory default is 0-64 。 to make sure of full gray scale ...

  • Page 26

    Lvp615u 使用说明 26 normally it’s less than 1 second. Sometimes it’s necessary to perform several times until the output image is clear, full and stable. 5.4.3 full/ part display （ bypass ） in signal switching status, press bypass button to switch full and part display. This function only works when cur...

  • Page 27

    Lvp615u 使用说明 27 5.4.5 image freeze (freeze) press freeze button and the indicator is on, the current image is frozen. Press freeze button again or switch to another signal to exit freeze status. 5.4.6 device information view (ok) in signal switching status, press ok to check the lvp615u current sett...

  • Page 28

    Lvp615u 使用说明 28 setup -------------------------------------- 1. Out image ＞＞ 2. Input video signal ＞＞ 3. Text overlay ＞＞ 4. Color&brightness,etc ＞＞ 5. Audio ＞＞ 6. Communication ＞＞ 7. 语言/language ＞＞ 8. Advance ＞＞ 9. After the system starts ， press setup to enter the setup menu.Then press ↑,↓ button t...

  • Page 29

    Lvp615u 使用说明 29 image” item.Then press ok button to enter the following image“1.Out image” item. 1.Out image -------------------------------------- 1.1 resolution 1920x1080_60 1.2 out width 1920 1.3 out height 1080 1.4 out h_start 0 1.5 out v_start 0 1.6 test pattern off 6.1.1 set output format lvp6...

  • Page 30

    Lvp615u 使用说明 30 tips -------------------------------------- data will reset press to reset press to cancel note: to custom output format ， after selection ， need further set 1.1.1 custom width 、 1.1.2 custom height and 1.1.3 custom v frequency. Press ↓ button to 1.1.4 apply ， press “ ok ”to make par...

  • Page 31

    Lvp615u 使用说明 31 6.1.2 set output image parameters led screen real resolution can be arbitrary. So we need set lvp615u to output the same image as the led screen. Then the led screen can display whole image. （ 0 ， 0 ） out hori start_ll out_hori_width our vert_start out vert height led screen lvp615u ...

  • Page 32

    Lvp615u 使用说明 32 6.1.3 test pattern lvp615u can generate 36test patterns for led screen testing. If this item value is “off”, turn off test pattern. Select other number and confirm.Then one corresponding test pattern of 36 pcs will be selected. Operation steps ： press ↓ button to select“1.6 test patt...

  • Page 33

    Lvp615u 使用说明 33 6.2 input video signal setting press setup button to enter setup menu. Press ↓ button to select 2. Input video signal and press ok to enter this item. 2.Input video signal -------------------------------------- 2.1 dvi edid 1280x1024_60 2.2 v1/v2 backup off 2.3 vga1/vga2 backup off 2...

  • Page 34

    Lvp615u 使用说明 34 2.1custom dvi edid -------------------------------------- 2.1.1 cus. Width 1920 2.1.2 cus. Height 1002 2.1.3 cus. V freq. 60 2.1.4 apply ok to apply 6.2.2 hot spare setting lvp615u supports hot spare of input signals. When the current input signal is lost. Lvp615u will switch to the ...

  • Page 35

    Lvp615u 使用说明 35 port to ypbpr. Operation steps ： in the menu of 2.5 v2 or ypbpr ， rotate knob to select needed parameters and press “ok” to make them effective. 6.2.4 signal switch mode press setup to enter setup menu ， press ↓ to select “2. Input video signal” ， then press ok to enter“2.Input video...

  • Page 36

    Lvp615u 使用说明 36 6.3 text overlay setting 3.Text overlay -------------------------------------- 3.1 text overlay off 3.2 text source ？ 3.3 text mode 3.4 threshold r 8 3.5 threshold g 4 3.6 threshold b 8 6.3.1 text overlay operation in the current input signal ， press setup and press ↓ to select”3.Tex...

  • Page 37

    Lvp615u 使用说明 37 text signal image which is bigger than the current signal will overlay on the current signal. Threshold r /g/b ： this is used to set three thresholds subtitles red, green and blue respectively for a particular value between 0 to 248. The following is the text overlay example. Text fi...

  • Page 38

    Lvp615u 使用说明 38 6.4 color& brightness,etc. 4.Color&brightness default -------------------------------------- 4.1 input color 50 v1= 50 v2=50 hdmi=50 dvi=50 dp=50 ext=50 v1=50 all=50 4.2 sharpness normal 4.Color&brightness default -------------------------------------- 4.3 brightness 50 50 lvp615u su...

  • Page 39

    Lvp615u 使用说明 39 4.2 sharpness normal or sharp ， default : normal. 4.3 brightness according to “8.5 brightness level” setting, adjustment range includes 0-64 or 0-100. The factory default of adjustment range is 0-64 and default is 64.“brightness level” can be set in factory setting. Note ： 1). To mak...

  • Page 40

    Lvp615u 使用说明 40 save. If hdmi （ or dp ） is configured as external audio input, processor will select external audio input signal when switching to hdmi （ or dp otherwise, it will select hdmi （ or dp ） itself audio as input. 1 、 6.6 communication 6.Communication --------------------------------------...

  • Page 41

    Lvp615u 使用说明 41 rotate knob to select parameters and press ok to save. The lcd screen will give tips to restart the system and do according to the prompt. 6.7 language setting lvp615u supports chinese and english language.Rotate knob to select one and press ok to save. 7. Language ------------------...

  • Page 42

    Lvp615u 使用说明 42 2 、 6.8 advance setting 8.Advance default -------------------------------------- 8.1 adc calibration ok to apply 8.2 bias 50 50 8.3 ext.Input model ext.Video 8.4 de-interlace off 8.5 bright level 0-64 8.6 dvi hotplug off 8.7 wifi reset ok to apply 8.8 device reset ok to apply 6.8.1 a...

  • Page 43

    Lvp615u 使用说明 43 ypbpr. The operation way is as follow ： in the current available analog signals, enter“8.1 adc calibration ” and press ok to start to calibrate. Note ： processors finished white balance calibration before leaving factory. Please use this item carefully. 6.8.2 bias to reduce noise of ...

  • Page 44

    Lvp615u 使用说明 44 this option is used to remove trembles, which might happen when inputs are cvbs/s-video/hdmi/sdi signals interlace signals (e.G.: 1080i) and used as pip. Operation is as below: enter “8.4 de-interlace”, rotate knob to select “on”, press “ok” button to make setting active. 6.8.5 brigh...

  • Page 45

    Lvp615u 使用说明 45 1 ） 6.8.7 wifi reset the menu item is used for resetting lvp615u’s wifi module parameter. Operations as below: enter “8.7 wifi reset”, press “ok” button, there is one information on lcd screen to remind you data will reset. Press ok button to apply. Lvp615u starts to reset.. 8) devic...

  • Page 46

    Lvp615u 使用说明 46 6.9 pip/pbp setting d.Pip/pbp mode=m1 -------------------------------------- d.1 pip width 640 d.2 pip height 320 d.3 pip h_start 16 d.4 pip v_start 16 d.5 main width 1920 d.6 main height 1080 d.7 main h_start 0 d.8 main v_start 0 the setup option is used to set lvp615u’s three user ...

  • Page 47

    Lvp615u 使用说明 47 mode button (m1, m2 or m3) to select a mode to save parameters, press ↓ to select parameter option needed to adjust. For example “d.1 main width”, rotate knob to change parameter, press ok button to save. （ 0 ， 0 ） pip h_start pip width pip v_start pip height main out image lvp615u o...

  • Page 48

    Lvp615u 使用说明 48 e.Mosaic（video wall app） -------------------------------------- e.9 in width 960 960 e.10 in height 540 540 e.11 in h_start 0 0 e.12 in v_start 0 0 e.13 out width 1920 1920 e.14 out height 1080 1080 e.15 out h_start 0 0 e.16 out v_start 0 0 lvp615u can maximally output 2304*1152 or c...

  • Page 49

    Lvp615u 使用说明 49 automa tic splicing menu compared with the whole spicing screen driven by this unit of lvp615u e.5 unit horizontal start e.6 unit vertical start e.7 sync. Splicing on or off of the sync splicing e.8 automatic splicing application of automatic splicing parameters manual setup menu e.9...

  • Page 50

    Lvp615u 使用说明 50 in the menu e.8 auto calculation, press ok, lvp615u starts to mosaic automatically; observing image splicing effect. If any problem, enter fine adjustment menu option e.9~e.16 to adjust image. Below is a 2×2 mosaic example using 4 sets of lvp615u, telling us how to use multi-units ca...

  • Page 51

    Lvp615u 使用说明 51 loop loop dvi loop lvp615u#0 #1 #2 #4 #3 input signals lvp615u# lvp615u# lvp615u# lvp615u# system topology 3456 1920 as above diagram shows, all input signals are connected to and switched by #0 lvp615u . The 2 same dvi outputs of #0 lvp615u are connect to #1 lvp615u and #2 lvp615u ....

  • Page 52

    Lvp615u 使用说明 52 e.7 unit vertical start 0 0 960 960 e.8 synchronization splicing on in order to ensure all output images are synchronous to each other, please note the following settings: 1. The input signals can be only dvi signals, and if the processor is in mosaic mode, it will be unable to switc...

  • Page 53

    Lvp615u 使用说明 53 chapter 7 remote control instructions lvp615u opens rs232 control protocol supporting pc, android or ios intelligent remote control terminal. Here we instruct the hardware connection and software operation as below. 7.1 hardware communication lvp615u remote control ports include rs23...

  • Page 54

    Lvp615u 使用说明 54 7.1.1 rs232 and usb rs232 is common port for remote control. When use rs232 control, we only need to use an rs232 cable to connect pc to processor’s rs232 port, then we can use software to remote control processor. When pc does not have rs232 port, usb control method can be used. Pc ...

  • Page 55

    Lvp615u 使用说明 55 7.1.2 wired network lvp615u built-in network convert rs232 module, after wired network connecting lan and setting relative network configuration parameters (refer user manual page 38 “6. Communication ”), lvp615u has been a work station in the local area network. So another terminal ...

  • Page 56

    Lvp615u 使用说明 56 7.1.3 wifi connection lvp615u is built in wifi module. Through this module, user can achieve wifi remote control of lvp615u. The module supports 2 wifi connection methods: first., wireless router, another wireless device connects the module directly and control. Second, through wifi ...

  • Page 57

    Lvp615u 使用说明 57 7.1.3 wifi connection using laptop with wireless network, open network and share center, search and connect the wireless network named lvp615u, the default wifi password is 88888888 configuring network be automatically obtain ip address and dns server address, show as the picture bel...

  • Page 58

    Lvp615u 使用说明 58 configuring network be automatically obtain ip address and dns server address, show as the picture below:.

  • Page 59

    Lvp615u 使用说明 59 note: if can’t connect, entering setup menu “8.7wifi reset” to reset wifi module (refer user manual page 48 ), then restart and connect. 7.1.4 wireless module configuration 1) running wireless scan configuration software “lvp615u wifi config tool.Exe”, the application software is as ...

  • Page 60

    Lvp615u 使用说明 60 2) click “scan” to search lvp615u in the local area network, after searching module the information display as below..

  • Page 61

    Lvp615u 使用说明 61 (3) in scan list click relative wifi module, when appear dialog box, type in user name (default name is admin ) and password (default password is admin ), software will remind “module identify successfully” and “obtain configuration parameter successfully”, meanwhile software interfa...

  • Page 62

    Lvp615u 使用说明 62 normally we set the consumption being “full”, mode description as the table below. Select the level according to your need. After modifying configuration click “save” button to save. Work mode description ap establish a encrypted wireless network, similar to a wireless router. Mainly...

  • Page 63

    Lvp615u 使用说明 63 ap setting.

  • Page 64

    Lvp615u 使用说明 64 click search key to find the around wireless network. Sta setting notice: better use manual method instead of automatic method to avoid disconnection due to ip address changes..

  • Page 65

    Lvp615u 使用说明 65 c. Serial port parameter setting this step is for setting basic parameters of serial port, after modifying configuration, click “save” button to save change. As the picture below shows, the boardrate should be 9600. D. Socket setting this step is for setting basic parameter of socket...

  • Page 66

    Lvp615u 使用说明 66 e. A super manage super manage includes modifying user name and password of module (identification information), name and group name of module, reset module and reset to default, please set according to needs. See the picture below:.

  • Page 67

    Lvp615u 使用说明 67 7.2 pc control software instructions lvp615u’s control software used to control led hd video processor lvp615u. Through the software, we can realize: selecting input signal switch by seamless switching or fade in fade out mode 3 user defined modes of double picture display or test ov...

  • Page 68

    Lvp615u 使用说明 68 7.2.1 control method as illustrated above, the pc remote control of lvp615u can realize connection by rs232, usb, lan or wifi. After connecting and needed configuration, we can run the control software: “lvp615u control software.Exe” 1 、 introduction of software interface double clic...

  • Page 69

    Lvp615u 使用说明 69 as shown above, there are 9 main parts of the software: 1) communication setting 2) language setting 3) signal switch 4) function and mode selection 5) information 6) timing control setting 7) output parameters setting(screen setting) 8) multi units cascading splicing setting(quick m...

  • Page 70

    Lvp615u 使用说明 70 in communication setup, first select connection method being serial or network. If select serial, need to select correct com port. Com port number can be checked in pc’s “device manager”, show as the picture below: the device id number you select must be as same as the lvp615u’s whic...

  • Page 71

    Lvp615u 使用说明 71 。 after the device connecting successfully, every function button in software inter face has been activated. Information area on main interface displays reminder connecting successfully. Setting timer automatically start: to select whether the processor automatically connect serial p...

  • Page 72

    Lvp615u 使用说明 72 however, if the blue indicator blinks, it means there are no valid signal input. Auto ： vga automatically adjust button, only available for vga1, vga2 and ext.Vga. Switching effect selection, can select cut (seamless switching) and fade in / fade out (0.5s 1s 1.5s) switching. Switchi...

  • Page 73

    Lvp615u 使用说明 73 5) information column if operation is unsuccessfully, the information area will display the reason of failing. 6) timing control setup the timer of the control software can switch the input signal source of lvp615u as per the preset timer plan. The system provides four cycle timer mo...

  • Page 74

    Lvp615u 使用说明 74 setting timing parameter in user interface click program, appear setup interface of timer, show as the picture below: show as the picture above, there are two types of plan: （ 1 ） cycle plan （ 2 ） once plan cycle plan is sub-divided into three types: （ 1 ） day plan （ timing in one da...

  • Page 75

    Lvp615u 使用说明 75 each month has maximum 31 days, so the plan items of month plan define date, hours, minutes, seconds; the plan items of once plan define year, date, hours, minutes, seconds; cycle plan and once plan can work together. For each type of plan, the plan items can be added, modified, dele...

  • Page 76

    Lvp615u 使用说明 76 7) output date setup in user main interface click setup , appearing the setup interface of output parameter, in the interface user can set output parameters of processor. As shown in above figure, the button “refresh” is used to update the information of currently processing paramete...

  • Page 77

    Lvp615u 使用说明 77 show as the picture screen output parameters include these parts as below: (1) image input/output parameters configuration and mosaic mode setup the parameters of output windows should be configured to the actual pixels of the screen to be driven. Mosaic mode setup and input image pa...

  • Page 78

    Lvp615u 使用说明 78 (2)pip/pbp display setup (location and size of pip windows) this menu is used to set the three pip/pop display modes of lvp605,first, select a pip mode to be adjusted, then enter the parameters of background, location and size of pip windows, then click “save” button to save the para...

  • Page 79

    Lvp615u 使用说明 79 (4)brightness, color, bias, sharpness setup these options is used to set brightness, color, bias and sharpness of output image, after typing in desired parameter click save button to save, or click reset button to reset parameters being default value. Directly click “normal” or “shar...

  • Page 80

    Lvp615u 使用说明 80 v2 or ypbpr setting you can select this terminal as v2 or ypbpr. 8) multi units cascading splicing rapid setup lvp615u can drive ultra high-definition led display through multi-machine cascade mosaic. User can complete input/output parameters configurations setup of each processor th...

  • Page 81

    Lvp615u 使用说明 81 caution: before making the mosaic settings, please make sure the following conditions have been met: (1)all processors are the same with each other in brightness, color, contrast and definition. (2) all processors must use the same output resolution, and make sure it the same with th...

  • Page 82

    Lvp615u 使用说明 82 a full picture independently. Connect all the processors or the first processor to be adjusted via serial ports. (1)using software connect processors select the device id of the first processor to be adjusted (from user setup item 6.5 “device id”), click “connect”, the processor will...

  • Page 83

    Lvp615u 使用说明 83 pop up the message “configuration is successful”. Click “set” button respectively in input and output field, the software will automatically save the parameters that it worked out in current processor. Caution: both input and output parameters of lvp615u must be even, but the results...

  • Page 84

    Lvp615u 使用说明 84 at the main interface of lvp615u control software ， click resolution and then the above interface will appear.In this interface ， the user can set the output resolution. Setting output resolution: click downward triangle to select a proper output resolution, processor will apply the ...

  • Page 85

    Lvp615u 使用说明 85 1 、 connection firstly, through local area network (lan interface) or wifi connect lvp615u and mobile device installed app. In here we illustrate by using router function of lvp615u’s wifi module. Open wireless lan switch of ios device, in the network searched out, connect the wifi h...

  • Page 86

    Lvp615u 使用说明 86 click connect ， if the communication is normal ， this button’s color will change into green from gray. Connection button.

  • Page 87

    Lvp615u 使用说明 87 if connect unsuccessfully, click communication option in adjustment setup, to make sure the setup is correct or not..

  • Page 88

    Lvp615u 使用说明 88 2 、 app operation.

  • Page 89

    Lvp615u 使用说明 89 after connection is successful, through software, users can control lvp615u, displaying as the guide interface above, app has four function areas: operation control, setting, mosaic setting and information. Single click guide interface, the corresponding buttons will enter selected f...

  • Page 90

    Lvp615u 使用说明 90 the main functions of operation control interface include: signal switch, pip/pbp, text overlay and other functions. （ 1 ） signal selection&switch lvp615u could support one key switch and preselect+take switch..

  • Page 91

    Lvp615u 使用说明 91.

  • Page 92

    Lvp615u 使用说明 92 signal switching mode selection in operation interface click signal switch mode, pop the interface as below, click to select appropriate switch mode. Switching time selection in operation interface, click switching time, popping the interface as below, click appropriate switching tim...

  • Page 93

    Lvp615u 使用说明 93 one key switch lvp615u’s default signal switching mode is that clicking corresponding button in signal source selection area to switch signal. Preselect+take switch the switch method’s interface as below, preselect firstly through signal source button,then through take button to swit...

  • Page 94

    Lvp615u 使用说明 94.

  • Page 95

    Lvp615u 使用说明 95 （ 2 ） pip display.

  • Page 96

    Lvp615u 使用说明 96 pip operation interface as the picture above, operation steps: firstly in operation interface click pip to open pip function, then click pip.

  • Page 97

    Lvp615u 使用说明 97 signal in popping pip signal selection interface; through mode button （ m1,m2,m3 ） , users could select corresponding display mode. Click pip setting in popping setting interface, users can set the location and size of main signal and pip signal. Interface of pip signal selection.

  • Page 98

    Lvp615u 使用说明 98 user can input specific parameters of main window and pip window. Press + and - to adjust. Sketch map of main and pip window’s location size. By multi-point touching in the area, user could zoom in and zoom out the image; by single-point touching in the area,user could drag and adjus...

  • Page 99

    Lvp615u 使用说明 99 firstly in operation interface click text overlay to open the function, then click text signal select relative input signal in popping interface; if needy to set the text threshold and other parameters, users could click text setting in popping interface. Text signal selection interf...

  • Page 100

    Lvp615u 使用说明 100 （ 4 ） other functions bypass: corresponding with the button bypass on front panel, namely part or full display function button. Freeze: corresponding with the button freeze on front panel; namely image freeze function button. Mosaic: corresponding with the button mosaic on front pan...

  • Page 101

    Lvp615u 使用说明 101 （ 1 ） output resolution.

  • Page 102

    Lvp615u 使用说明 102 select the appropriate resolution in output resolution menu. And click setting, the processor will change to new resolution. If selecting custom resolution, user needs to set the corresponding width, height and frame frequency. （ 2 ） output image parameter.

  • Page 103

    Lvp615u 使用说明 103 the interface is used to set the location and size of output image, user could enter parameter manually, then through + and - to adjust parameters, in diagram area of output parameters, through multiple-point touching to zoom in or zoom out image size, single-point touching to drag ...

  • Page 104

    Lvp615u 使用说明 104 （ 4 ） image quality.

  • Page 105

    Lvp615u 使用说明 105 in image quality interface, users could set lvp615u output brightness, sharpness, bias and set every input signal’s color independently. Reset is used to return to default value.

  • Page 106

    Lvp615u 使用说明 106 （ 5 ） audio audio setting interface could set lvp615u’s corresponding input signals of two audio inputs, in order to achieve audio and video synchronous switch. （ 6 ） network setting network setting menu is used to input network parameter of lvp615u, this is the premise of remote co...

  • Page 107

    Lvp615u 使用说明 107 lvp615u remote control app only support chinese and english interface presently, click language and exit language setting interface, then the language selected will be applied. 3 ） mosaic setting step1. Enter the size of whole screen, and the size and location of the processor in us...

  • Page 108

    Lvp615u 使用说明 108 to achieve splicing function before entering mosaic, need to make sure these settings as below. （ 1 ） the current input signal is dvi （ 2 ） the resolution of dvi input signal must be as same as the output resolution of processor （ 3 ） mosaic function is open correctly operation step...

  • Page 109

    Lvp615u 使用说明 109 4 ） information display the interface includes the app-controllable model, app version information and company information..

  • Page 110

    Lvp615u 使用说明 110 chapter 8 copyright information the copyright of this manual is owned by shenzhen vdwall co.,ltd., unless with prior consent of vdwall, nobody is permitted to copy or use any part or all of the information contained herein. This manual is provided for reference only, vdwall reserves...

  • Page 111

    Lvp615u 使用说明 111 appendix ： modify the record table version time description draft v1.0 2017.5.24 lvp615u first release lts.

  • Page 112

    Lvp615u 使用说明 112.