1. DL manuals
  2. Vecom
  3. Desktop
  4. ECS-8000
  5. User Manual

Vecom ECS-8000 User Manual

Manual is about: Intel Quad Core i7 (Broadwell-H) Fanless Embedded System High Performance, Rugged, Extended Temp, Power Protection

Summary of ECS-8000

  • Page 1

    User manual user manual 1.0.0 edition 20160311 ecs-8000 intel ® quad core™ i7 (broadwell-h) fanless embedded system high performance, rugged, extended temp, power protection.

  • Page 2: Record of Revision

    Ii version date page description remark 0.1 02/26/2016 all preliminary release 1.0 03/11/2016 all office release record of revision.

  • Page 3: Fcc

    Iii this manual is released by vecow co., ltd. For reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of vecow co., ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential da...

  • Page 4: Order Information

    Iv part number description ecs-8000- poer850q ecs-8000 fanless embedded system, quad core 5th gen intel ® core™ i7-5850eq processor (broadwell-h), 6 gbe lan with 4 poe + , 2 front-access ssd tray, 4 com, 7 usb, 2 sim, isolated dio, 16 gpio ecs-8000- poer700q ecs-8000 fanless embedded system, quad co...

  • Page 5: Optional Accessories

    V part number description m340l-w28m1 vecow ddr3l 4gb 1333/1066 mhz ram, wide temperature -40°c to +85°c ddr3l8g certified ddr3l-1600 8g ram ddr3l4g certified ddr3l-1600 4g ram pwa-120w 120w, 24v, 90vac to 264vac power adapter with 3-pin terminal block pwa-120wm4p 120w, 24v, 90vac to 264vac power ad...

  • Page 6: Table of Contents

    Vi table of contents chapter 1 general introduction 1 1.1 overview 1 1.2 features 2 1.3 product specification 2 1.3.1 specifications of ecs-8000-poer 2 1.3.2 specifications of ecs-8000-poe 4 1.3.3 specifications of ecs-8000-2g 6 1.3.4 specifications of ecs-8000-2r 9 1.4 supported cpu list 11 1.5 mec...

  • Page 7: Chapter   4

    Vii 3.2 installing ddr3l so-dimm modules 64 3.3 installing mini pcie cards 65 3.4 installing antenna cable 66 3.5 installing cfast card and sim card 68 3.6 installing ssd/hdd 70 3.6.1 ecs-8000-poer/ ecs-8000-2r 70 3.6.2 ecs-8000-poe/ ecs-8000-2g 71 3.7 mounting ecs-8000 74 chapter 4 bios and driver ...

  • Page 8: General Introduction

    1 general introduction 1 general introduction ecs-8000 series fanless embedded system is a perfect integrated high performance embedded engine in the market. Powerful quad-core 5th generation intel ® core™ i7 (broadwell-h) engine running with 15% enhanced productivity than former generation, intel ®...

  • Page 9: 1.3   Product Specification

    2 general introduction ©vecow ecs-8000 user manual 1.3 product specification 1.3.1 specifications of ecs-8000-poer system processor quad core intel ® core™ i7-5850eq/ i7-5700eq (broadwell-h) chipset intel ® qm87 bios ami sio it8786e memory • ddr3l 1600 mhz so-dimm, up to 32gb • 2 204-pin so-dimm soc...

  • Page 10

    3 general introduction interface • vga : up to 1920 x 1200 @ 60hz • dvi-d : up to 1920 x 1080 @ 60hz • displayport 1 : up to 4096 x 2304 @ 60hz • displayport 2 : up to 4096 x 2304 @ 60hz • edp : up to 4096 x 2304 @ 60hz storage sata 2 sata iii (6gbps) msata 2 sata iii (mini pcie type, 6gbps) sata do...

  • Page 11

    4 general introduction ©vecow ecs-8000 user manual mechanical dimensions (wxdxh) 260mm x 175mm x 79mm (10.2” x 6.9” x 3.1”) weight 2.8 kg (6.2 lb) mounting • wallmount by mounting bracket • din rail mount • 2u rackmount (optional) environment operating temperature -25°c to 70°c (-13°f to 158°f) stor...

  • Page 12

    5 general introduction graphics graphics processor • intel ® iris pro graphics 6200 (5850eq) • intel ® hd graphics 5600 (5700eq) interface • vga : up to 1920 x 1200 @ 60hz • dvi-d : up to 1920 x 1080 @ 60hz • displayport 1 : up to 4096 x 2304 @ 60hz • displayport 2 : up to 4096 x 2304 @ 60hz • edp :...

  • Page 13

    6 general introduction ©vecow ecs-8000 user manual software support os windows 8, windows 7, linux mechanical dimensions (wxdxh) 260mm x 175mm x 79mm (10.2” x 6.9” x 3.1”) weight 2.8 kg (6.2 lb) mounting • wallmount by mounting bracket • din rail mount • 2u rackmount (optional) environment operating...

  • Page 14

    7 general introduction expansion mini pcie 3 mini pcie socket : • 2 mini pcie for pcie/ usb/ external sim card/ msata • 1 mini pcie for pcie/ usb sumit a, b 2 sumit slot (optional) graphics graphics processor • intel ® iris pro graphics 6200 (5850eq) • intel ® hd graphics 5600 (5700eq) interface • v...

  • Page 15

    8 general introduction ©vecow ecs-8000 user manual software support os windows 8, windows 7, linux mechanical dimensions (wxdxh) 260mm x 175mm x 79mm (10.2” x 6.9” x 3.1”) weight 2.8 kg (6.2 lb) mounting • wallmount by mounting bracket • din rail mount • 2u rackmount (optional) environment operating...

  • Page 16

    9 general introduction 1.3.4 specifications of ecs-8000-2r system processor quad core intel ® core™ i7-5850eq/ i7-5700eq (broadwell-h) chipset intel ® qm87 bios ami sio it8786e memory • ddr3l 1600 mhz so-dimm, up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/ 422/ 485 usb • 4 ...

  • Page 17

    10 general introduction ©vecow ecs-8000 user manual ethernet lan 1 intel ® i218 gigabit lan supports iamt lan 2 intel ® i210 gigabit lan power power input 6v to 36v, dc-in power interface • 3-pin terminal block : v+, v-, ign, frame ground • mini-din 4-pin ignition control 16 mode (internal) remote s...

  • Page 18: 1.4   Supported Cpu List

    11 general introduction 1.4 supported cpu list cpu name tdp cache max. Frequency embedded i7-5950hq 47 w 6mb up to 3.80 ghz i7-5850hq 47 w 6mb up to 3.60 ghz i7-5850eq 47 w 6mb up to 3.40 ghz yes i7-5750hq 47 w 6mb up to 3.50 ghz i7-5700hq 47 w 6mb up to 3.50 ghz i5-5700eq 47 w 6mb up to 3.40 ghz ye...

  • Page 19: 1.5   Mechanical Dimensions

    12 general introduction ©vecow ecs-8000 user manual 1.5 mechanical dimensions 1.5.1 dimensions of ecs-8000-poer 1.5.2 dimensions of ecs-8000-poe 260,0 (10,2) 297,0 (11,7) 115,0 (4,5) 175,0 (6,9) 282,0 (11,1) 79,1 (3,1) 297,0 (11,7) unit: mm (inch) 260,0 (10,2] 297,0 (11,7) 115,0 (4,5) 175,0 (6,9) 28...

  • Page 20

    13 general introduction 1.5.3 dimensions of ecs-8000-2g 1.5.4 dimensions of ecs-8000-2r 260,0 (10,2) 297,0 (11,7) 115,0 (4,5) 175,0 (6,9) 282,0 (11,1) 79,1 (3,1) 297,0 (11,7) unit: mm (inch) 260,0 (10,2) 297,0 (11,7) 115,0 (4,5) 175,0 (6,9) 282,0 (11,1) 79,1 (3,1) 297,0 (11,7) unit: mm (inch).

  • Page 21: 2.1   Packing List

    14 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2 getting to know your ecs-8000 2.1 packing list item description qty 1 ecs-8000 fanless embedded system (according to the configuration you order, the ecs-8000 series may contain ssd/hdd and ddr3l so-dimm. Please verify these items if nec...

  • Page 22

    15 getting to know your ecs-8000 2.2.1 reset tact switch it is a hardware reset switch. Use this switch to reset the system without power off the ecs-8000. Press the reset switch for a few seconds, then reset will be enabled. Reset hdd pwr dvi-d vga 2 1 lan 2 lan 1 cfast sim 1 sim 2 1 2 3 wlan wwan ...

  • Page 23

    16 getting to know your ecs-8000 ©vecow ecs-8000 user manual pin no. Description pin no. Description s1 gnd pc6 nc s2 sata_txp pc7 gnd s3 sata_txn pc8 cfast_led s4 gnd pc9 nc s5 sata_rxn pc10 nc s6 sata_rxp pc11 nc s7 gnd pc12 nc pc1 gnd pc13 +3.3v pc2 gnd pc14 +3.3v pc3 nc pc15 gnd pc4 nc pc16 gnd ...

  • Page 24

    17 getting to know your ecs-8000 2.2.4 pwr and hdd led indicator led color power status system status yellow hdd/ cfast • on/ off : storage status, function or not. • twinkling : data transferring. Green power system power status (on/ off) yellow-hdd led: a hard disk/ cfast led. If the led is on, it...

  • Page 25

    18 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.2.7 displayport reset hdd pwr dvi-d vga 2 1 lan 2 lan 1 cfast sim 1 sim 2 1 2 3 wlan wwan onboard displayport connection supports up to 4096 x 2304 resolutions at 60 hz. 2.2.6 vga connector reset hdd pwr dvi-d vga 2 1 lan 2 lan 1 cfast s...

  • Page 26

    19 getting to know your ecs-8000 2.2.8 external usb reset hdd pwr dvi-d vga 2 1 lan 2 lan 1 cfast sim 1 sim 2 1 2 3 wlan wwan there are 2 usb 3.0 connections available supporting up to 5gb per second data rate in the front side of ecs-8000. It also compliant with the requirements of superspeed (ss),...

  • Page 27

    20 getting to know your ecs-8000 ©vecow ecs-8000 user manual pin no. 10/ 100mbps 1000mbps 1 e_tx+ mdi0_p 2 e_tx- mdi0_n 3 e_rx+ mdi1_p 4 ---- mdi2_p 5 ----- mdi2_n 6 e_rx- mdi1_n 7 ----- mdi3_p 8 ------ mdi3_n each lan port is supported by standard rj-45 connector with led indicators to present acti...

  • Page 28

    21 getting to know your ecs-8000 1 8 led 10mbps 100mbps 1000mbps right bottom led off solid green solid orange left bottom led twinkling yellow twinkling yellow twinkling yellow 2.2.11 audio connector reset hdd pwr dvi-d vga 2 1 lan 2 lan 1 cfast sim 1 sim 2 1 2 3 wlan wwan there are 2 audio connect...

  • Page 29

    22 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.3 rear panel i/o and functions 2.3.1 power terminal block pin no. Definition 1 v+ 2 v- 3 earth gnd ecs-8000 supports 6v to 36v dc power input by terminal block in the rear side. In normal power operation, power led lightens in solid gree...

  • Page 30

    23 getting to know your ecs-8000 pin no. Definition 1 ignition 2 sw+ 3 sw- 2.3.3 isolated dio there is a 16-bit dio (8-bit di, 8-bit do) connector in the rear side. Each dio channel is equipped with a photocoupler for isolated protection. A power buffer device tpd2007f integrated in 8-do circuit for...

  • Page 31

    24 getting to know your ecs-8000 ©vecow ecs-8000 user manual gpi source mode digital gpi input signal circuit in source mode (pnp) is illustrated as follow : gpo sink mode digital gpo output circuit in sink mode (npn) is illustrated as follow : gpi sink mode isolated gpi input circuit in sink mode (...

  • Page 32

    25 getting to know your ecs-8000 2.3.4 serial port com serial port pin no. Rs-232 rs-422 (5-wire) rs-422 (9-wire) rs-485 (3-wire) 1, 2 3, 4 1 dcd txd- txd- data- 2 rxd txd+ txd+ data+ 3 txd rxd+ rxd+ ----------- 4 dtr rxd- rxd- ----------- 5 gnd gnd gnd gnd 6 dsr ----------- rts- ----------- 7 rts -...

  • Page 33

    26 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.3.5 poe (power over ethernet) ports there are 4 rj45 connectors in the rear side of ecs-8000. It supports ieee 802.3at (poe + ) power over ethernet (poe) connection delivering up to 25.5w/ 48v per port and 1000base-t gigabit data signals...

  • Page 34

    27 getting to know your ecs-8000 2.4 main board expansion connectors 2.4.2 bottom view of ecs-8000 main board with connector location 2.4.1 top view of ecs-8000 main board with connector location j2 j1 j3 j5 j6 j4 bios cn16 cn18 cn10 cn19 battery cn15 cn9 cn11 cn12 cn13 cn14 fan1 cn22 cn27 j7 j8 j9 ...

  • Page 35

    28 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.3 j5 miscellaneous pin header this pin header can be used as a backup for following functions, hard drive led indicator, reset button, power led indicator, and power-on/ off button, which already can be accessed by front panel and top ...

  • Page 36

    29 getting to know your ecs-8000 ecs-8000 supports edp display, up to 4096 x 2304 pixels resolution. The pin assignments of cn18 are listed in the following table: 2.4.4 cn16, cn18 edp cn16 cn18 pin no. Definition pin no. Definition 1 gnd 11 gnd 2 +v3p3s_dp_emb (+5v / +3.3v) 12 vss_edp_amoled 3 gnd ...

  • Page 37

    30 getting to know your ecs-8000 ©vecow ecs-8000 user manual the lcd inverter is connected to cn16 via a 2x5-pin, 2.0mm pin header providing backlight control. The pin assignments are listed in the following table: pin no. Definition pin no. Definition 1 +5v 6 lvds_vdd_en 2 l_bklt_en 7 gnd 3 n.C. 8 ...

  • Page 38

    31 getting to know your ecs-8000 2.4.5 cn9, cn10 : sata iii connector there are 2 onboard high performance serial ata iii (sata iii) on ecs-8000. It supports higher storage capacity with less cabling effort and smaller required space. The pin assignments of cn9 and cn10 are listed in the following t...

  • Page 39

    32 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.6 cn14 : sata ii connector there is a onboard high performance serial ata ii (sata ii) on ecs-8000. It supports higher storage capacity with less cabling effort and smaller required space. The pin assignments of cn14 are listed in the ...

  • Page 40

    33 getting to know your ecs-8000 2.4.7 cn11 : sata power connector the ecs-8000 also equip with a sata power connector. It supports 5v (up to 4a) and 12v (up to 2a) current to the hard drive or ssd. The pin assignments of cn11 are listed in the following table: connector pin no. Description pin no. ...

  • Page 41

    34 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.8 cn12 : internal usb the ecs-8000 main board provide one expansion usb port using plug-and- play for dongle key or lcd touch panel. The usb interface supports 480 mbps transfer rate which comply with high speed usb specification rev. ...

  • Page 42

    35 getting to know your ecs-8000 2.4.9 cn27, cn15 : mini pcie, msata both msata and mini pcie share the same form factor and similar electrical pinout assignments on their connectors. There was no clear mechanism to distinguish if a msata drive or a mini pcie device is plugged into the socket until ...

  • Page 43

    36 getting to know your ecs-8000 ©vecow ecs-8000 user manual pin no. Signal name pin no. Signal name 51 reserved 52 +3.3vaux 49 reserved 50 gnd 47 reserved 48 +1.5v 45 reserved 46 reserved 43 status 44 reserved 41 +3.3vaux 42 reserved 39 +3.3vaux 40 gnd 37 gnd 38 usb_d+ 35 gnd 36 usb_d- 33 petp0 34 ...

  • Page 44

    37 getting to know your ecs-8000 2.4.10 cn19 : mini pcie pin no. Signal name pin no. Signal name 51 reserved 52 +3.3vaux 49 reserved 50 gnd 47 reserved 48 +1.5v 45 reserved 46 reserved 43 gnd 44 reserved 41 +3.3vaux 42 reserved 39 +3.3vaux 40 gnd 37 gnd 38 usb_d+ 35 gnd 36 usb_d- 33 petp0 34 gnd 31 ...

  • Page 45

    38 getting to know your ecs-8000 ©vecow ecs-8000 user manual 25 perp0 26 gnd 23 pern0 24 +3.3vaux 21 gnd 22 perst# 19 reserved 20 reserved 17 reserved 18 gnd mechanical key 15 gnd 16 uim_vpp 13 refclk+ 14 uim_reset 11 refclk- 12 uim_clk 9 gnd 10 uim_data 7 clkreq# 8 uim_pwr 5 reserved 6 1.5v 3 reser...

  • Page 46

    39 getting to know your ecs-8000 2.4.12 j6 : lan2 i210 sdp the pin assignments of j6 are listed in the following table: pin no. Function pin no. Function 1 lan2_sdp0 4 lan2_sdp3 2 lan2_sdp1 5 gnd 3 lan2_sdp2 6 gnd j6.

  • Page 47

    40 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.13 cn13 : gpio the ecs-8000 offers 16 programmable i/o within ttl 5v (1ma max. /pin) tolerance. If the gpio is logic high, it indicates that the mapping sio gpio pin is logic high level. If the gpio is logic low, it indicates that the ...

  • Page 48

    41 getting to know your ecs-8000 2.4.14 fan 1 fan power connector supports for additional thermal requirements. The pin assignments of fan 1 are listed in the following table: pin no. Function pin no. Function 1 gnd 3 fan speed sensor 2 +12v (1.5a max) fan1 11 gnd 24 gnd 12 smb_data 25 +5v 13 smb_cl...

  • Page 49

    42 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.15 j4 : sgpio the pin assignments of j4 are listed in the following table: pin no. Function pin no. Function 1 sclock 4 gnd 2 sdata_out0 5 sdata_out1 3 sload 6 gnd j4.

  • Page 50

    43 getting to know your ecs-8000 2.4.16 j7 : mcu spy-bi wire interface for download fw the pin assignments of j7 are listed in the following table: pin no. Function pin no. Function 1 gnd 4 3.3v_mcu 2 mcu_rst# 5 mcu_prg j7.

  • Page 51

    44 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.17 cn20, cn24 summit cn20 cn24.

  • Page 52

    45 getting to know your ecs-8000 pin no. Function pin no. Function 1 +5v_aux 2 +12v 3 +3.3v 4 smb_data 5 +3.3v 6 xmb_clk 7 reserved 8 reserved 9 reserved 10 spi_miso 11 usb_oc# 12 spi_mosi 13 reserved 14 spi_clk 15 +5v 16 spi_cs10 17 usb_3+ 18 spi_cs1# 19 usb_3- 20 reserved 21 +5v 22 lpc_drq1# 23 us...

  • Page 53

    46 getting to know your ecs-8000 ©vecow ecs-8000 user manual pin no. Function pin no. Function 1 gnd 2 gnd 3 b_pet_p0 4 b_per_p0 5 b_pet_n0 6 b_per_n0 7 gnd 8 gnd 9 c_clkp 10 b_clkp 11 c_clkn 12 b_clkn 13 cprsnt#/c_pe_clkreq# 14 gnd 15 c_pet_p0 16 c_per_p0 17 c_pet_n0 18 c_per_n0 19 gnd 20 gnd 21 c_...

  • Page 54

    47 getting to know your ecs-8000 2.4.18 j1: poe power led indicator pin header this pin header can be used as a backup for poe power led indicator, which already can be accessed by rear panel and bottom panel. The pinouts of leds port are listed in following table: pin no. Function pin no. Function ...

  • Page 55

    48 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.4.19 j2, j3: lan3~lan6 gbe led pin header these pin headers can be used as a backup forlan3~lan6 gbe led indicator, which already can be accessed by rear panel. The pinouts of leds port are listed in following table: j2 j3 connector pin ...

  • Page 56

    49 getting to know your ecs-8000 2.4.20 j9: lpc port 80 debug port the pin assignments of j9 are listed in the following table: pin no. Function pin no. Function 1 int_serirq 7 pch_lframe_n 2 +3.3v (0.5a max.) 8 pch_lpc_lad0 3 pch_lpc_lad3 9 mechanical key 4 pltrst_sio# 10 gnd 5 pch_lpc_lad1 11 clk_...

  • Page 57

    50 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.5 main board jumper settings 2.5.1 front view of ecs-8000 main board with jumper location you may configure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit...

  • Page 58

    51 getting to know your ecs-8000 2.5.2 jp1, jp2, jp3, jp4: com port pin-9 ri/+5v/+12v selection jp1 jp4 jp3 jp2 pin header pin no. Description com1 jp3 1 - 2 +5v (1a max.) 3 - 4 +12v (0.5a max.) 5 - 6 *ri pin header pin no. Description com2 jp2 1 - 2 +5v (1a max.) 3 - 4 +12v (0.5a max.) 5 - 6 *ri pi...

  • Page 59

    52 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.5.3 jp5 : lvds backlight, power selection jp5 provides lvds voltage selection function, closing pin 1, 2 is for 3.3v lvds power input; closing pin 2, 3 is for 5v lvds power input. Pin no. Function pin no. Function 1-2 +3.3v (default) 2-3...

  • Page 60

    53 getting to know your ecs-8000 2.5.4 sw6: cmos / me / edp / usb wake up sw6 function dip switch sw 6-1 description cmos clear setting on clear cmos off *normal function dip switch sw 6-2 description me clear setting on clear me off *normal function dip switch sw 6-3 description edp enable on enabl...

  • Page 61

    54 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.5.5 sw2, sw3: rs-422/485 receiver terminator sw3 sw2 function dip switch sw 2-1 description com1 rs-422/485 receiver terminator on *enable off disable function dip switch sw 2-2 description com2 rs-422/485 receiver terminator on *enable ...

  • Page 62

    55 getting to know your ecs-8000 2.5.6 sw1, sw4: mini pcie / msata selection internal usb pwr select: mini pcie / msata dip switch description sw 4-1 sw 4-2 cn27 on off *auto detection off on mini pci-e (forced) off off msata (forced) mini pcie / msata dip switch description sw 1-1 sw 1-2 cn15 on of...

  • Page 63: 2.6   Ignition Control

    56 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.6 ignition control ecs-8000 series provides ignition power control feature for in-vehicle applications. The built-in mcu monitors the ignition signal and turns on/ off the system according to pre-defined on/ off delay period. Sw5.

  • Page 64

    57 getting to know your ecs-8000 2.6.1 adjust ignition control modes ecs-8000 series provides 16 modes of different power on/ off delay periods adjustable via rotary switch. The default rotary switch is set to 0 in atx/ at power mode. Dip-switch position power on delay power off delay switch positio...

  • Page 65

    58 getting to know your ecs-8000 ©vecow ecs-8000 user manual 2.6.2 ignition control wiring to activate ignition control, you need to provide ign signal via the 3-pin pluggable terminal block locates in the back panel. Please find below the general wiring configuration. V+ : positive polarity of dc p...

  • Page 66: System Setup

    59 hardware installation 3 system setup “please make sure to assemble the system in an anti-static environment.” 3.1 how to open your ecs-8000 3.1.1 ecs-8000-poer/ ecs-8000-2r step 2 take off the front panel. Step 1 remove 6 pcs khs #6-32 screws with front panel..

  • Page 67

    60 hardware installation ©vecow ecs-8000 user manual step 3 remove 5 pcs khs #6-32 screws with rear panel. Step 4 remove 4pcs f#6-32(red) screws..

  • Page 68

    61 hardware installation 3.1.2 ecs-8000-poe/ ecs-8000-2g step 1 remove 6 pcs khs #6-32 screws with front panel. Step 5 finish..

  • Page 69

    62 hardware installation ©vecow ecs-8000 user manual step 4 remove 1 pcs m3x6 (red) and 4 pcs f#6-32 (blue) screws. Step 3 remove 5 pcs khs #6-32 screws with rear panel. Step 2 take off the front panel..

  • Page 70

    63 hardware installation step 5 take off ssd/hdd cover and bottom cover, be careful sata cable. Step 6 finish..

  • Page 71

    64 hardware installation ©vecow ecs-8000 user manual 3.2 installing ddr3l so-dimm modules step 1 install ddr3l ram module into so-dimm slot. (ecs-8000-poer/ ecs-8000-poe/ ecs-8000-2g/ ecs-8000-2r) step 2 make sure the ram module is locked by the memory slot. (ecs-8000-poer/ ecs-8000-poe/ ecs-8000-2g...

  • Page 72

    65 hardware installation 3.3 installing mini pcie cards step 1 install mini pcie card into the mini pcie slot. (ecs-8000-poer/ ecs-8000-poe/ ecs-8000-2g/ ecs-8000-2r) step 2 fasten m2.5 screws. (ecs-8000-poer/ ecs-8000-poe/ ecs-8000-2g/ ecs-8000-2r).

  • Page 73

    66 hardware installation ©vecow ecs-8000 user manual 3.4 installing antenna cable step 1 check antenna cable and washers. 3 2 1 step 2 remove 3pcs rubber cork on rear panel. (pick up the location you want).

  • Page 74

    67 hardware installation step 3 put antenna cable connector into the hole on rear panel. Step 5 antenna cable is installed ready. Step 4 fasten the washer 1, washer 2 and washer 3 on antenna cable connector..

  • Page 75

    68 hardware installation ©vecow ecs-8000 user manual 3.5 installing cfast card and sim card step 2 remove cfast card and sim card cover from front panel. Step 1 remove 2pcs m3x4 flat head screws on cfast & sim card cover on front panel..

  • Page 76

    69 hardware installation step 3 before inserting cfast & sim card, make sure the system power is not plugged. Step 4 insert cfast & sim card, push to lock..

  • Page 77: 3.6   Installing Ssd/hdd

    70 hardware installation ©vecow ecs-8000 user manual 3.6 installing ssd/hdd 3.6.1 ecs-8000-poer/ ecs-8000-2r step 2 put on the ssd/hdd. Step 1 open the ssd/ hdd tray on the ecs-8000 front panel. Step 3 push the tray panel with locked..

  • Page 78

    71 hardware installation step 4 have a key can fasten the tray. Close open 3.6.2 ecs-8000-poe/ ecs-8000-2g step 1 remove m3x6 screws for ssd/ hdd cover. Step 2 insert 2.5” ssd/ hdd in the tray then match ssd/ hdd bracket with screw hole..

  • Page 79

    72 hardware installation ©vecow ecs-8000 user manual step 4 insert sata cable with ssd/ hdd. Step 3 locked 8 pcs m3 screws in ssd/ hdd screw hole..

  • Page 80

    73 hardware installation step 6 fasten m3x6 screw with ssd/hdd cover. Step 5 close the ssd/ hdd cover..

  • Page 81: 3.7   Mounting Ecs-8000

    74 hardware installation ©vecow ecs-8000 user manual 3.7 mounting ecs-8000 step 1 ensure the screw holes on the right and left side of upper case match the ones on ecs-8000 wallmount bracket. Step 2 fasten 4pcs khs#6-32 screws..

  • Page 82: Bios and Driver Setting

    75 bios and driver setting bios and driver setting 4 4.1 bios settings the board uses uefi bios that is use serial peripheral interface (spi) flash. The spi flash contains the bios setup program, post, the pci auto- configuration utility, lan, eeprom information, and serial port support. The bios se...

  • Page 83: 4.3   Advanced Function

    76 bios and driver setting ©vecow ecs-8000 user manual system time/ date press “tab” key to switch sub-items of value .Then press “+” key or “-“ key number key for modify value. Figure 4-2-1: system time / date setting 4.2.1 system time/date setting 4.3 advanced function 4.3.1 acpi setting enable ac...

  • Page 84

    77 bios and driver setting 4.3.2 cpu configuration intel virtualization technology this for virtualization application or platform usage, when enabled, a vmm can utilize the additional hardware capabilities provided by vanderpool technology. Figure 4-3-2: cpu configuration setup screen 4.3.3 sata co...

  • Page 85

    78 bios and driver setting ©vecow ecs-8000 user manual 4.3.4 amt configuration intel amt enables or disables intel ® active management technology bios extension. This option just controls the bios extension executes. Figure 4-3-4: amt setup screen sata controller(s) enables or disables integrate sat...

  • Page 86

    79 bios and driver setting 4.3.5 serial port 1 configuration serial port enable or disable serial port. Device setting current io address and interrupt resource of serial port. Change settings select another device setting. There are 6 options as follow : • auto • io=3f8h; irq=4; • io=3f8h; irq=3,4,...

  • Page 87

    80 bios and driver setting ©vecow ecs-8000 user manual 4.3.6 serial port 2 configuration serial port enable or disable serial port. Device setting current io addresses and interrupts resource of serial port. Change settings select another device setting. There are 6 options as follow : • auto • io=2...

  • Page 88

    81 bios and driver setting 4.3.7 serial port 3 configuration serial port enable or disable serial port. Device setting current io address and interrupt resource of serial port. Change settings select another device setting. There are 6 options as follow : • auto • io=3e8h; irq=11; • io=3e8h; irq=3,4...

  • Page 89

    82 bios and driver setting ©vecow ecs-8000 user manual 4.3.8 serial port 4 configuration serial port enable or disable serial port. Device setting current io address and interrupt resource of serial port. Change settings select another device setting. There are 6 options as follow : • auto • io=2e8h...

  • Page 90: 4.4   Chipset Function

    83 bios and driver setting 4.4 chipset function 4.4.1 wol configuration pch lan controller enable or disable on board network device. Wake on lan enable or disable integrated lan to wake the system. Figure 4-4-1 : network setup screen figure 4-4: chipset function setup screen chipset related options...

  • Page 91: 4.5   Boot Function

    84 bios and driver setting ©vecow ecs-8000 user manual 4.5 boot function 4.5.1 boot option boot option you can select boot device priority in this page. Figure 4-5-1 boot option setup screen figure 4-5: boot function setup screen.

  • Page 92: 4.6   Save & Exit

    85 bios and driver setting 4.6 save & exit figure 4-6: save & exit setup screen save changes and exit / save changes and reset choose this setting to exit the bios setup program and save changes to the bios nvram memory. Make sure you select this in order to keep your changes. Discard changes and ex...

  • Page 93: A.1   I/o Pin Definition

    86 ©vecow ecs-8000 user manual appendix a a a.1 i/o pin definition i/o pin base adr usage gpio 70~77 0xa06 cn16-gpio gpio 80~87 0xa07 dio output appendix a : isolated dio guide a.2 function description the ecs-8000 offers a 16-bit dio (8-di / 8-do) 20-pin terminal block connector. Each bit of di and...

  • Page 94

    87 appendix a digital gpio input signal circuit in sink mode (npn) is illustrated as follow. Digital gpio input signal circuit in source mode (pnp) is illustrated as follow. Digital gpio output signal circuit in sink mode (npn) is illustrated as follow..

  • Page 95: A.4   Driver Install

    88 ©vecow ecs-8000 user manual appendix a a.3 software package contain here have two folders inside : 1. Driver folder include x86 and x64 version. 2. Dll and head file for software developer or system integration. 3. C# and c++ sample program. A.4 driver install this driver only support to 32bit ve...

  • Page 96

    89 appendix a in 64bit version, here have another window for driver certified. Please agree this license to finish the install process. After driver install process complete , you must restart system to get dio driver actived..

  • Page 97: B.1   Function Description

    90 ©vecow ecs-8000 user manual appendix b b appendix b : gpio and wdt functions b.1 function description the wdt are using internal super i/o function. However, you must entry super i/o configuration mode to set it. Super i/o special address port = 0x2e super i/o special data port = 0x2f gpio logica...

  • Page 98

    91 appendix c c appendix c : power consumption testing board ecs-8000 ram 2 x innodisk 16gb usb-1 usb keyboard logitech k120 usb-2 usb mouse microsoft 1113 usb-3 usb flash transcend 3.0 8gb usb-4 usb flash transcend 3.0 8gb usb-5 usb flash transcend 2.0 16gb usb-6 usb flash kingston 3.0 8gb cfast me...

  • Page 99

    92 ©vecow ecs-8000 user manual appendix c cpu power input idle status : cpu usage less 3% run 100% cpu usage max current max consumption max current max consumption i7-5850eq 06v 2.680a 16.08w 6.220a 37.32w i7-5850eq 09v 1.730a 15.57w 3.960a 35.64w i7-5850eq 12v 1.370a 16.44w 2.970a 35.64w i7-5850eq...

  • Page 100

    Standby mode cpu input power max current max consumption i7-5700eq 06v 0.390a 02.34w i7-5700eq 09v 0.270a 02.43w i7-5700eq 12v 0.230a 02.76w i7-5700eq 24v 0.150a 03.60w i7-5700eq 28v 0.130a 03.64w i7-5700eq 36v 0.120a 04.32w cpu power input idle status : cpu usage less 3% run 100% cpu usage max curr...

  • Page 101

    For further support information, please visit www.Vecow.Com this document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, re...