Vecow ABP-2000 User Manual

Manual is about: Fanless Advanced Box PC, 2 LAN, 2 HDMI, 6 COM Onboard Intel Atom Bay Trail E3845 Quad Core Processor

Summary of ABP-2000

  • Page 1

    1.0.3 edition 05/01/2016 all information is subject to change without notice. Abp-2000 fanless advanced box pc, 2 lan, 2 hdmi, 6 com onboard intel ® atom™ bay trail e3845 quad core processor user manual user manual.

  • Page 2

    Worldwide technical support and product information www.Vecow.Com vecow co., ltd. Headquarters 12f no 111 zhongcheng rd tucheng dist new taipei city 23674 taiwan r.O.C. Tel: 886 2 2268 5658 fax: 886 2 2268 1658 for further support information, refer to the technical support and professional services...

  • Page 3

    Iv v ©vecow abp-2000 series advanced box pc user manual this manual is intended to be used as a practical and informative guide only and is subject to change without prior notice. It does not represent commitment from vecow co., ltd. Vecow shall not be liable for direct, indirect, special, incidenta...

  • Page 4: Table of Contents

    Vi g table of contents declaimer iv declaration of conformity iv copyright and trademarks iv fcc iv ce iv order information v optional accessories v general introduction 1 1.1 overview 1 1.2 product specification 2 1.2.1 specifications of vecow abp-2845 2 1.2.2 specifications of vecow abp-2045 3 1.2...

  • Page 5: General Introduction

    1 product introduction general introduction abp-2000 series are equipped with intel® quad-core atom™ e3800 (formerly codenamed bay trail) processor family (1.91ghz) and ddr3l single channel 8gb ram, 2 hdmi display, 2 rs-232, 2 rs-232/422/485, 2 isolated rs- 232/422/485, 2 gbe lans, one 2.5” sata 3gp...

  • Page 6

    2 product introduction 3 product introduction ©vecow abp-2000 series advanced box pc user manual 1.2 product specification system processor intel® atom™ quad core valleyview (bay trail) processor (e3845 1.91ghz) chipset valleyview soc memory 1 ddr3l 1600 sodimm, max. 8gb video 1 db 15 vga 2 hdmi 1.4...

  • Page 7

    4 product introduction 5 product introduction ©vecow abp-2000 series advanced box pc user manual 1.3 supported cpu list vecow abp-2000 series is based on intel® atom™ bay trail platform and accepts the following bay trail-i family processors. E3845 and e3815 are selected in abp-2000 series standard ...

  • Page 8

    7 getting to know your abp-2000 6 product introduction ©vecow abp-2000 series advanced box pc user manual 1.4 mechanical dimension figure 1.1 abp-2845 figure 1.2 abp-2045 141 (5.6”) 48 (1.9”) 141 (5.6”) 124 (4.9”) 86 (3.4”) 71 (2.8”) 141 (5.6”) 257 (10.1”) 257 (10.1”) 257 (10.1”) 48 (1.9”) 141 (5.6”...

  • Page 9

    8 getting to know your abp-2000 9 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual getting to know your abp-2000 2.1 packing list 2 2.2 front panel i/o functions item description qty 1 abp-2000 series fanless controller (according to the configuration you order, the s...

  • Page 10

    10 getting to know your abp-2000 11 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual the power button is a non-latched switch with dual color led (blue/orange) for indication s0, s3 and s5 status. Power button dual-color led indicator: status led display system situat...

  • Page 11

    12 getting to know your abp-2000 13 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.2.5 vga connector the right bottom corners glow a solid green color when the cable is properly connected to a 100 mbps ethernet network. The led indicator on the left bottom corner ...

  • Page 12

    14 getting to know your abp-2000 15 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 1 2 3 4 2.2.8 dual usb 2.0 ports the abp-2000 series comes with 2 usb 2.0 hosts on the front panel. The usb interface supports plug and play, which enables you to connect or disconnec...

  • Page 13

    16 getting to know your abp-2000 17 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.3.1 serial ports com1 and com2 com1 and com2 are rs-232 only and provide up to 115200 bps baud rates. The pin assignments are shown in the following table: serial port pin no. Rs-23...

  • Page 15

    20 getting to know your abp-2000 21 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual figure 2.4.1 internal connectors and jumpers 2.4 main board expansion connectors the figure below is the top view of the abp-2000 series main board. It shows the location of the conne...

  • Page 16

    22 getting to know your abp-2000 23 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.4.1 panel 1 miscellaneous pin header these pin headers can be used as a backup for the following functions: hard drive led indicator, reset button, power led indicator, and power-on...

  • Page 17

    24 getting to know your abp-2000 25 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.4.3 cn21 sata ii connector & j1 sata power connector the abp-2000 series features two high performance serial ata ii interfaces that eases cabling to hard drives or ssd with thin an...

  • Page 18

    26 getting to know your abp-2000 27 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual it is for connecting an esata storage device. There was no clear mechanism to distinguish if a msata drive or a mini pci-e device is plugged into the socket until recently that sata-i...

  • Page 19

    28 getting to know your abp-2000 29 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.4.6 cn29 gpio pin no. Signal name pin no. Signal name pin no. Signal name pin no. Signal name 41 +3.3vaux 42 nc 23 pern0 24 +3.3vaux 39 +3.3vaux 40 gnd 21 gnd 22 perst# 37 gnd 38 us...

  • Page 20

    30 getting to know your abp-2000 31 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.5 main board jumper setting the figure below is the top view of the abp-2000 series main board. It shows the location of the jumpers. You may configure your card to match the needs ...

  • Page 21

    32 getting to know your abp-2000 33 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual 2.5.1 jp1(a) cmos clear jumper setting setting description 1-3 normal (default) 3-5 clear cmos 2.5.2 jp1(b) me clear jumper setting setting description 2-4 normal (default) 4-6 clear ...

  • Page 22

    35 system setup 34 getting to know your abp-2000 ©vecow abp-2000 series advanced box pc user manual jp2 provides lvds voltage selection function, closing pin 1, 2 is for 3.3v lvds power input; closing pin 2, 3 is for 5v lvds power input. Setting description 1-2 +3.3v (default) 2-3 +5v 2.5.3 jp2 lvds...

  • Page 24

    38 system setup 39 system setup ©vecow abp-2000 series advanced box pc user manual 3.3 mount your abp-2000 installation method 1 installation method 2.

  • Page 25

    40 bios and driver 41 bios and driver ©vecow abp-2000 series advanced box pc user manual bios and driver 4.1 bios settings the board uses uefi bios that is use serial peripheral interface (spi) flash. The spi flash contains the bios setup program, post, the pci auto-configuration utility, lan, eepro...

  • Page 26

    42 bios and driver 43 bios and driver ©vecow abp-2000 series advanced box pc user manual enable acpi auto configuration: this system support acpi function as auto process. You should enable / disable that depend as your o.S. Enable hibernation: it is able to use hibernate function if o.S support. Bu...

  • Page 27

    44 bios and driver 45 bios and driver ©vecow abp-2000 series advanced box pc user manual 4.2.4 serial port 3 configuration advanced->it8786e super io configuration->serial port 1 configuration figure 4.2.4: serial port 1 setup screen serial port : enable or disable serial port. Device setting: curre...

  • Page 28

    46 bios and driver 47 bios and driver ©vecow abp-2000 series advanced box pc user manual 4.2.6 serial port 5 configuration advanced->it8786e super io configuration->serial port 1 configuration figure 4.2.6: serial port 1 setup screen serial port : enable or disable serial port. Device setting: curre...

  • Page 29

    48 bios and driver 49 bios and driver ©vecow abp-2000 series advanced box pc user manual 4.2.8 ppm configuration figure 4.2.8: trusted computing setup screen eist : enables or disables intel speed function , once you enabled it , you could use the intel turbo boost software to monitor you cpu perfor...

  • Page 30

    50 bios and driver 51 bios and driver ©vecow abp-2000 series advanced box pc user manual 4.3 chipset function 4.3.1 display configuration figure 4.3.1: network setup screen chipset->north bridge->intel igd configuration->primary display primary display: select which display module you would like to ...

  • Page 31

    52 bios and driver 53 bios and driver ©vecow abp-2000 series advanced box pc user manual 4.4 boot function 4.4.1 change boot configuration figure 4.4.1: boot setup screen boot option: when you press “enter” , you can select which device you would like to boot. 4.5 save & exit 4.5.1 1.5.1. Reload def...

  • Page 32

    54 55 ©vecow abp-2000 series advanced box pc user manual appendix a appendix a ppendix a : gpio & wdt a operation system support linux : ubuntu 12.04 lts or above fedora 16 or above and another linux kernel 2.6.38 and rhl6.0 (* the linux kernel of rhl , please check radhat website first ) windows : ...

  • Page 33

    56 ©vecow abp-2000 series advanced box pc user manual appendix a 0x08 for wdt function. Reg [0x72] is watchdog on/off control. Watchdog on : set_data( 0x30 , 0x01); watchdog off : set_data( 0x30 , 0x00); reg [0x73] is watchdog timer – for wdt timer out value watchdog counter start : set_data( 0xf0 ,...