1. DL manuals
  2. Vecow
  3. Desktop
  4. ECS-9000
  5. User manual

Vecow ECS-9000 User manual

Manual is about: Quad Core Intel Core i7/i5/i3 w/C236 Fanless Embedded System High Performance, Rugged, -40C to 75C Extended Temp

Summary of ECS-9000

  • Page 1

    User manual user manual 1.1.0 edition 20170509 quad core intel ® core ™ i7/i5/i3 w/c236 fanless embedded system high performance, rugged, -40°c to 75°c extended temp. Ecs-9000

  • Page 2: Record of Revision

    Ii version date page description remark 1.0 11/25/2016 all official release 1.1 05/09/2017 97 update record of revision.

  • Page 3: Fcc

    Iii this manual is released by vecow co., ltd. For reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of vecow co., ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential da...

  • Page 4: Order Information

    Iv part number description ecs-9000-9gd ecs-9000, 9 gige lan with 4 poe + , m2dom, 6 usb 3.0, 4 com, 3 sim, 16 isolated dio ecs-9000-9r ecs-9000, 9 gige lan with 4 poe + , 2 front-access ssd tray, m2dom, 6 usb 3.0, 4 com, 3 sim, isolated dio ecs-9000-poer ecs-9000, 6 gige lan with 4 poe + , 2 front-...

  • Page 5: Order Accessories

    V part number description i7-6700 6th gen intel ® core™ i7-6700 processor (8m cache, up to 4.00 ghz) i7-6700te 6th gen intel ® core™ i7-6700te processor (8m cache, up to 3.40 ghz) i5-6500 6th gen intel ® core™ i5-6500 processor (6m cache, up to 3.60 ghz) i5-6500te 6th gen intel ® core™ i5-6500te pro...

  • Page 6: Table of Contents

    Vi table of contents chapter 1 general introduction 1 1.1 overview 1 1.2 features 2 1.3 product specification 2 1.3.1 specifications of ecs-9000-9gd 2 1.3.2 specifications of ecs-9000-9r 4 1.3.3 specifications of ecs-9000-poer 7 1.3.4 specifications of ecs-9000-poe 9 1.3.5 specifications of ecs-9000...

  • Page 7: Chapter   3

    Vii 2.5 main board jumper & deep switch settings 53 2.6 ignition control 56 chapter 3 system setup 59 3.1 how to open your ecs-9000 59 3.2 installing cpu 63 3.3 installing ddr4 so-dimm modules 66 3.4 installing mini pcie card 67 3.5 installing antenna cable 68 3.6 installing cfast card 69 3.7 instal...

  • Page 8: General Introduction

    1 general introduction 1 general introduction vecow ecs-9000 series is an all-in-one integrated fanless embedded workstation system. Lga1151 socket supports quad core 6th generation intel ® xeon ® / core™ i7/i5/i3 processor (skylake-s) running with workstation- grade intel ® c236 chipset, dual chann...

  • Page 9: 1.2   Features

    2 general introduction ©vecow ecs-9000 user manual 1.2 features • lga 1151 socket supports quad core 6th generation intel ® core ™ i7/i5/i3 processor (skylake-s) with intel ® c236 chipset • fanless, -40°c to 75°c operating temperature • 2 ddr4 2133mhz memory, up to 32gb • up to 9 gige lan with 4 iee...

  • Page 10

    3 general introduction expansion mini pcie 3 mini pcie socket : • 2 full-size for pcie/ usb/ external sim card/ msata • 1 half-size for pcie/ usb 3.0/ external sim card graphics graphics processor intel ® hd graphics 530 interface • dvi-i : up to 1920 x 1200 @ 60hz • dvi-d : up to 1920 x 1200 @ 60hz...

  • Page 11

    4 general introduction ©vecow ecs-9000 user manual others tpm optional infineon slb9665 supports tpm 2.0, lpc interface watchdog timer reset : 1 to 255 sec./min. Per step smart management wake on lan, pxe supported hw monitor monitoring temperature, voltages. Auto throttling control when cpu overhea...

  • Page 12

    5 general introduction memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm socket i/o interface serial 4 com rs-232/ 422/ 485 w/ auto flow control usb • 6 usb 3.0 (external) • 1 usb 2.0 (internal) isolated dio 16 isolated dio (8 di, 8 do) led power, hdd, wireless, poe sim card 3 sim card socket (...

  • Page 13

    6 general introduction ©vecow ecs-9000 user manual lan 5 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210 lan 6 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210 power input voltage 6v to 36v, dc-in power interface • 3-pin terminal block : v+, v-, frame ground • mini-din 4-pin ignition control ...

  • Page 14

    7 general introduction 1.3.3 specifications of ecs-9000-poer system processor intel ® core™ i7-6700/ i7-6700te/ i5-6500/ i5-6500te/ i3-6100/ i3-6100te processor (skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm socket i/o interface serial 4 ...

  • Page 15

    8 general introduction ©vecow ecs-9000 user manual ethernet lan 1 intel ® i219lm gige lan supports iamt 11.0 lan 2 intel ® i210 gige lan poe lan 3 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210 lan 4 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210 lan 5 gige ieee 802.3at (25.5w/48v) poe + b...

  • Page 16

    9 general introduction shock • iec 60068-2-27 • ssd : 50g @ wallmount, half-sine, 11ms vibration • iec 60068-2-64 • ssd : 5grms, 5hz to 500hz, 3 axis emc ce, fcc, en50155, en50121-3-2 1.3.4 specifications of ecs-9000-poe system processor intel ® core™ i7-6700/ i7-6700te/ i5-6500/ i5-6500te/ i3-6100/...

  • Page 17

    10 general introduction ©vecow ecs-9000 user manual m2dom 1 pcie 3.0 (8gt/s)/ sata iii (6gbps) storage device • 1 cfast socket, push-in/ push-out ejector • 2 2.5" ssd/ hdd bracket (internal) audio audio codec realtek alc892, 5.1 channel hd audio audio interface 1 mic-in, 1 line-out ethernet lan 1 in...

  • Page 18

    11 general introduction environment operating temperature • 35w tdp cpu (i7-6700te, i5-6500te, i3-6100te) : -40°c to 75°c (-40°f to 167°f) • 65w tdp cpu (i7-6700/ i5-6500/ i3-6100) : -40°c to 55°c (-40°f to 131°f) storage temperature -40°c to 85°c (-40°f to 185°f) humidity 5% to 95% humidity, non-co...

  • Page 19

    12 general introduction ©vecow ecs-9000 user manual graphics graphics processor intel ® hd graphics 530 interface • dvi-i : up to 1920 x 1200 @ 60hz • dvi-d : up to 1920 x 1200 @ 60hz • displayport : up to 4096 x 2304 @ 60hz storage sata 2 sata iii (6gbps) msata 2 sata iii (mini pcie type, 6gbps) sa...

  • Page 20

    13 general introduction software support os windows 10, windows 8.1, windows 7, linux mechanical dimensions (wxdxh) 260mm x 175mm x 79mm (10.24" x 6.89" x 3.11") weight 3.8 kg (8.38 lb) mounting • wallmount by mounting bracket • din rail mount (optional) • 2u rackmount (optional) environment operati...

  • Page 21

    14 general introduction ©vecow ecs-9000 user manual i/o interface serial 4 com rs-232/ 422/ 485 w/ auto flow control usb • 6 usb 3.0 (external) • 1 usb 2.0 (internal) isolated dio 16 isolated dio (8 di, 8 do) led power, hdd, wireless sim card 3 sim card socket (external) expansion mini pcie 3 mini p...

  • Page 22

    15 general introduction ignition control 16 mode (internal) remote switch 3-pin terminal block : on, off, ign surge protection up to 80v/1ms transient power others tpm optional infineon slb9665 supports tpm 2.0, lpc interface watchdog timer reset : 1 to 255 sec./min. Per step smart management wake o...

  • Page 23

    16 general introduction ©vecow ecs-9000 user manual 1.3.7 specifications of ecs-9000-4g system processor intel ® core™ i7-6700/ i7-6700te/ i5-6500/ i5-6500te/ i3-6100/ i3-6100te processor (skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm soc...

  • Page 24

    17 general introduction lan 1 intel ® i219lm gige lan supports iamt 11.0 lan 2 intel ® i210 gige lan lan 3 intel ® i210 gige lan lan 4 intel ® i210 gige lan power input voltage 6v to 36v, dc-in power interface • 3-pin terminal block : v+, v-, frame ground • mini-din 4-pin ignition control 16 mode (i...

  • Page 25

    18 general introduction ©vecow ecs-9000 user manual 1.3.8 specifications of ecs-9000-4r system processor intel ® core™ i7-6700/ i7-6700te/ i5-6500/ i5-6500te/ i3-6100/ i3-6100te processor (skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm soc...

  • Page 26

    19 general introduction lan 1 intel ® i219lm gige lan supports iamt 11.0 lan 2 intel ® i210 gige lan lan 3 intel ® i210 gige lan lan 4 intel ® i210 gige lan power input voltage 6v to 36v, dc-in power interface • 3-pin terminal block : v+, v-, frame ground • mini-din 4-pin ignition control 16 mode (i...

  • Page 27

    20 general introduction ©vecow ecs-9000 user manual 1.3.9 specifications of ecs-9000-2g system processor intel ® core™ i7-6700/ i7-6700te/ i5-6500/ i5-6500te/ i3-6100/ i3-6100te processor (skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm soc...

  • Page 28

    21 general introduction ethernet lan 1 intel ® i219lm gige lan supports iamt 11.0 lan 2 intel ® i210 gige lan power input voltage 6v to 36v, dc-in power interface • 3-pin terminal block : v+, v-, frame ground • mini-din 4-pin ignition control 16 mode (internal) remote switch 3-pin terminal block : o...

  • Page 29

    22 general introduction ©vecow ecs-9000 user manual 1.3.10 specifications of ecs-9000-2r system processor intel ® core™ i7-6700/ i7-6700te/ i5-6500/ i5-6500te/ i3-6100/ i3-6100te processor (skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm so...

  • Page 30

    23 general introduction ethernet lan 1 intel ® i219lm gige lan supports iamt 11.0 lan 2 intel ® i210 gige lan power input voltage 6v to 36v, dc-in power interface • 3-pin terminal block : v+, v-, frame ground • mini-din 4-pin ignition control 16 mode (internal) remote switch 3-pin terminal block : o...

  • Page 31: 1.4   Supported Cpu List

    24 general introduction ©vecow ecs-9000 user manual 1.4 supported cpu list processor no. Tdp cache max. Frequency embedded intel ® core™ i7-6700 65w 8m up to 4.70 ghz intel ® core™ i7-6700te 35w 8m up to 3.40 ghz intel ® core™ i5-6500 65w 8m up to 3.60 ghz intel ® core™ i5-6500te 35w 8m up to 3.30 g...

  • Page 32

    25 general introduction 1.5.3 dimensions of ecs-9000-poer 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 115.0 (4.53”) 175.0 (6.89”) 79.1 (3.1 1”) unit: mm (inch) 1.5.4 dimensions of ecs-9000-poe 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 115.0 (4.53”) 175.0 (6.89”) 79.1 (3.1 1”) unit: mm (inch) 1.5...

  • Page 33

    26 general introduction ©vecow ecs-9000 user manual 1.5.6 dimensions of ecs-9000-6fr 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 115.0 (4.53”) 175.0 (6.89”) 79.1 (3.1 1”) unit: mm (inch) 1.5.7 dimensions of ecs-9000-4g 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 115.0 (4.53”) 175.0 (6.89”) 79.1 (3...

  • Page 34

    27 general introduction 1.5.9 dimensions of ecs-9000-2g 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 115.0 (4.53”) 175.0 (6.89”) 79.1 (3.1 1”) unit: mm (inch) 1.5.10 dimensions of ecs-9000-2r 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 115.0 (4.53”) 175.0 (6.89”) 79.1 (3.1 1”) unit: mm (inch).

  • Page 35: 2.1   Packing List

    28 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2 getting to know your ecs-9000 2.1 packing list item description qty 1 ecs-9000 fanless embedded system (according to the configuration of you order, the ecs-9000 series may contain ssd/hdd and ddr4 so-dimm. Please verify these items if n...

  • Page 36

    29 getting to know your ecs-9000 2.2 front panel i/o functions in vecow ecs-9000 series family, all i/o connectors are located on front panel and rear panel. Most of the general connections to computer device, such as usb, lan jack, display, dvi-d, display port and any additional storage, are placed...

  • Page 37

    30 getting to know your ecs-9000 ©vecow ecs-9000 user manual pin no. Description pin no. Description s1 gnd pc6 nc s2 sata_txp5 pc7 gnd s3 sata_txn5 pc8 cfast_led s4 gnd pc9 nc s5 sata_rxn5 pc10 nc s6 sata_rxp5 pc11 nc s7 gnd pc12 nc pc1 gnd pc13 +3.3v pc2 gnd pc14 +3.3v pc3 nc pc15 gnd pc4 nc pc16 ...

  • Page 38

    31 getting to know your ecs-9000 2.2.4 pwr and hdd led indicator hdd led/ yellow: a hard disk/ cfast led. If the led is on, it indicates that the system’s storage is functional. If it is off, it indicates that the system’s storage is not functional. If it is flashing, it indicates data access activi...

  • Page 39

    32 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.2.6 dvi-i connector reset hdd pwr dvi-d dp dvi-i lan 1 lan 2 cfast sim 1 sim 2 sim 3 1 2 3 wlan the dvi-i connector on the front panel supports both dvi and vga display modes. This connector can output dvi signals. The dvi output mode su...

  • Page 40

    33 getting to know your ecs-9000 2.2.8 usb 3.0 reset hdd pwr dvi-d dp dvi-i lan 1 lan 2 cfast sim 1 sim 2 sim 3 1 2 3 wlan there are 4 usb 3.0 connections available supporting up to 5gb per second data rate in the front side of ecs-9000. It also compliant with the requirements of super speed (ss), h...

  • Page 41

    34 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.2.9 ethernet port there are 2 8-pin rj-45 jacks supporting 10/100/1000 mbps ethernet connections in the front side. Lan 1 is powered by intel i219 ethernet phy; lan 2 is powered by intel i210 ethernet engine. When both lan 1 and lan 2 wo...

  • Page 42

    35 getting to know your ecs-9000 each lan port is supported by standard rj-45 connector with led indicators to present active/ link/ speed status of the connection. The led indicator on the right bottom corner lightens in solid green when the cable is properly connected to a 100 mbps ethernet networ...

  • Page 43

    36 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.3 rear panel i/o and functions 2.3.1 power terminal block 2.3.2 remote power on/ off switch & ignition com 1 com 2 com 3 com 4 dc-in isolated dio 20 11 10 1 d i pin 1 ~ 8 do pin 11 ~ 18 power switch on / off ign lan 4 lan 3 lan 6 lan 5 3...

  • Page 44

    37 getting to know your ecs-9000 2.3.3 isolated dio com 1 com 2 com 3 com 4 dc-in isolated dio 20 11 10 1 d i pin 1 ~ 8 do pin 11 ~ 18 power switch on / off ign lan 4 lan 3 lan 6 lan 5 3 4 poe+ 5 6 poe+ there is a 16-bit (8-bit di, 8-bit do) connectors in the rear side. Di/dio support npn(sink) and ...

  • Page 45

    38 getting to know your ecs-9000 ©vecow ecs-9000 user manual sink mode (npn) v+ v- power supply 6-48v dc di_com (pin 9) di (pin1-8) dio connector source mode (pnp) v+ v- power supply 6-48v dc di_com (pin 9) di (pin1-8) dio connector dio jumper setting status dio1 jp9 1-2 (default) npn (sink mode): m...

  • Page 46

    39 getting to know your ecs-9000 serial port pin no. Rs-232 rs-422 (5-wire) rs-422 (9-wire) rs-485 (3-wire) 1 to 4 1 dcd txd- txd- data- 2 rxd txd+ txd+ data+ 3 txd rxd+ rxd+ ----------- 4 dtr rxd- rxd- ----------- 5 gnd gnd gnd gnd 6 dsr ----------- rts- ----------- 7 rts ----------- rts+ ---------...

  • Page 47

    40 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.3.5 poe (power over ethernet) ports there are 4 rj45 connectors in the rear side of ecs-9000. It supports ieee 802.3at (poe + ) power over ethernet (poe) connection delivering up to 37w/ 54v per port and 1000base-t gige data signals over...

  • Page 48

    41 getting to know your ecs-9000 poe led led color poe status led 3 - 6 solid green poe on 2.4 main board expansion connectors 2.4.1 top view of ecs-9000 main board with connector location sata1 sata2 cn14 jp3 sata3 jp7 jp8 jp9 bios sodimm 1 cn37 jp1 battery sumitb sumita cn11 jp5 jp6 jp4 j7 j3 j4 j...

  • Page 49

    42 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.4.2 bottom view of ecs-9000 main board with connector location cn10 cn9 2.4.3 miscellaneous pin header 2.0mm 2x4p header this pin header can be used as a backup for following functions, hard drive led indicator, reset button, power led i...

  • Page 50

    43 getting to know your ecs-9000 reset button 5 fp_rst_btn_n 7 ground power led 2 pwr_led_p 4 pwr_led_n power button 6 fp_pwr_btn_in 8 ground 2.4.4 sata iii connector there are 3 onboard high performance serial ata iii (sata iii) on ecs-9000. It supports higher storage capacity with less cabling eff...

  • Page 51

    44 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.4.5 sata power connector the ecs-9000 also equip with a sata power connector. The one port supports 5v (up to 2a) and 12v (up to 2a) current to the hard drive or ssd. The pin assignments of j3 , j4 are listed in the following table: j3 j...

  • Page 52

    45 getting to know your ecs-9000 model no. Definition m2dom s20 3me3 8gb s20 / s30 16gb s20 / s30 32gb s20 / s30 64gb s30 128gb cn14 2.4.7 internal usb the usb 3.0 connections available supporting up to 5gb per second data rate. It also compliant with the requirements of superspeed (ss), high speed ...

  • Page 53

    46 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.4.8 ddr4 slot there are 2 ddr4 channel onboard, support ddr4 2133/1866, max 32gb each channel 16gb slot description slot description sodimm_1 ddr4 channel a sodimm_2 ddr4 channel b sodimm 1 sodimm 2 2.4.9 bios socket if the bios needs to...

  • Page 54

    47 getting to know your ecs-9000 2.4.10 sumit a, sumit b this system have standard sumita and sumitb for sumit type add on cards. Sumitb sumita pin no. Function pin no. Function 1 +5v_aux 2 +12v 3 +3.3v 4 smb_data 5 +3.3v 6 xmb_clk 7 reserved 8 reserved 9 reserved 10 spi_miso 11 usb_oc# 12 spi_mosi ...

  • Page 55

    48 getting to know your ecs-9000 ©vecow ecs-9000 user manual pin no. Function pin no. Function 1 gnd 2 gnd 3 b_pet_p0 4 b_per_p0 5 b_pet_n0 6 b_per_n0 7 gnd 8 gnd 9 c_clkp 10 b_clkp 11 c_clkn 12 b_clkn 13 cprsnt#/c_pe_clkreq# 14 gnd 15 c_pet_p0 16 c_per_p0 17 c_pet_n0 18 c_per_n0 19 gnd 20 gnd 21 c_...

  • Page 56

    49 getting to know your ecs-9000 45 +5v 46 +3.3v 47 +5v 48 +3.3v 49 +5v 50 +3.3v 51 +5v 52 +5v_aux 2.4.11 mini pcie standard full length mini pcie slot: mini pcie 1 mini pcie 2 mini pcie 3 pin no. Function pin no. Function 51 reserved 52 +3.3vaux 49 reserved 50 gnd 47 reserved 48 +1.5v 45 reserved 4...

  • Page 57

    50 getting to know your ecs-9000 ©vecow ecs-9000 user manual 29 gnd 30 smb_clk 27 gnd 28 +1.5v 25 pern0 26 gnd 23 perp0 24 +3.3vaux 21 gnd 22 perst# 19 reserved 20 reserved 17 reserved 18 gnd mechanical key 15 gnd 16 uim_vpp 13 refclk+ 14 uim_reset 11 refclk- 12 uim_clk 9 gnd 10 uim_data 7 clkreq# 8...

  • Page 58

    51 getting to know your ecs-9000 2.4.13 fan header fan power connector supports for additional thermal requirements. The pin assignments of fan 1 are shown in the following diagram: pin no. Function pin no. Function 1 gnd 2 +12v (1.5a max) 3 fan speed sensor 4 fan pwm pin out: fn1 pin no. Function p...

  • Page 59

    52 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.4.15 speed led header the system's provide a lpc port 80 header for debug card. Pin no. Lan function 1 lan3 link100# 2 lan4 link100# 3 lan3 link1000# 4 lan4 link1000# 5 lan3 act# 6 lan4 act# 7 lan3 +3v 8 lan4 +3v j6 pin out: j7 j6 pin no...

  • Page 60

    53 getting to know your ecs-9000 cn14 jp3 jp7 jp8 jp9 sw1 jp1 jp5 jp6 jp4 jp2 2.5 main board jumper & deep switch settings 2.5.1 top view of ecs-9000 with jumper and deep switch the figure below is the top view of the system board, and it shows the location of the jumpers and the switches. You may c...

  • Page 61

    54 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.5.2 usb power jumper jumper setting function jp7 2:3 non wake up support jp7 1:2 supported wake up (default) jp7 2.5.3 com port ri pin select jp3 jp5 jp6 jp4 pin header pin no. Description com1 jp3 1-2 +5v (1a max.) 3-4 +12v (0.5a max.) ...

  • Page 62

    55 getting to know your ecs-9000 pin header pin no. Description com4 jp6 1-2 +5v (1a max.) 3-4 +12v (0.5a max.) 5-6 ri (default) 2.5.5 poe power on select jumper setting function jp8 1:2 poe power on at standby power ready jp8 2:3 poe power on after system power on (default) jp8 2.5.6 cmos & me clea...

  • Page 63: 2.6   Ignition Control

    56 getting to know your ecs-9000 ©vecow ecs-9000 user manual jumper setting function jp2 1:2 *normal (default) jp2 2:3 clear me 2.6 ignition control 2.6.1 adjust ignition control modes ecs-9000 series provides ignition power control feature for in-vehicle applications. The built-in mcu monitors the ...

  • Page 64

    57 getting to know your ecs-9000 the modes are listed in the following table: item power on delay power off delay switch position 0 atx mode 1 no delay no delay 2 no delay 5 seconds 3 no delay 10 seconds 4 no delay 20 seconds 5 5 seconds 30 seconds 6 5 seconds 60 seconds 7 5 seconds 90 seconds 8 5 s...

  • Page 65

    58 getting to know your ecs-9000 ©vecow ecs-9000 user manual 2.6.2 ignition control wiring to activate ignition control, you need to provide ign signal via the 3-pin pluggable terminal block located in the back panel. It is below the general wiring configuration. Pin no. Definition 1 ignition (ign) ...

  • Page 66: System Setup

    59 hardware installation system setup 3.1 how to open your ecs-9000 3 3.1.1 ecs-9000-r series step 1 remove front panel six khs#6-32 screws then pick up front panel. Step 2 remove rear panel five khs#6-32 screws..

  • Page 67

    60 hardware installation ©vecow ecs-9000 user manual step 4 finish. Step 3 remove bottom four f#6-32 screws..

  • Page 68

    61 hardware installation 3.1.2 ecs-9000-f/ g/ poe serise step 1 remove front panel six khs#6-32 screws then pick up front panel. Step 2 remove rear panel five khs#6-32 screws..

  • Page 69

    62 hardware installation ©vecow ecs-9000 user manual step 4 finish. Step 3 remove bottom four f#6-32(red) and one f-m3(yellow) screws..

  • Page 70: 3.2   Installing Cpu

    63 hardware installation 3.2 installing cpu step 1 remove one f #6-32 and pick up chock bracket. Step 2 remove eleven ph-m3 screws and pick up mother board..

  • Page 71

    64 hardware installation ©vecow ecs-9000 user manual step 4 open cpu slot. (be careful cpu pin) step 3 cpu slot..

  • Page 72

    65 hardware installation step 6 finish. Step 5 installing cpu on the slot. Step 7 close cpu slot and finish..

  • Page 73

    66 hardware installation ©vecow ecs-9000 user manual 3.3 installing ddr4 so-dimm modules step 1 install ddr4 ram module into so-dimm slot. Step 2 make sure the ram module is locked by the memory slot..

  • Page 74

    67 hardware installation 3.4 installing mini pcie card step 1 install mini pcie card into the mini pcie socket. Step 2 fasten one m2.5 screw..

  • Page 75

    68 hardware installation ©vecow ecs-9000 user manual 3.5 installing antenna cable step 1 check antenna cable and washers. 1 2 3 step 2 put antenna cable connector into the hole on rear panel and fasten the washer 1, washer 2 and washer 3 on antenna cable connector..

  • Page 76: 3.6   Installing Cfast Card

    69 hardware installation 3.6 installing cfast card step 2 remove cfast card and sim card cover. Step 1 remove two f-m3x4 screws on cfast card and sim card cover from the front panel..

  • Page 77

    70 hardware installation ©vecow ecs-9000 user manual step 4 insert cfast card and push to lock. Step 5 finish. Step 3 before inserting cfast & sim card, make sure the system power is not plugged..

  • Page 78: 3.7   Installing Sim Card

    71 hardware installation 3.7 installing sim card step 2 remove cfast card and sim card cover. Step 1 remove two f-m3x4 screws on cfast card and sim card cover from the front panel..

  • Page 79

    72 hardware installation ©vecow ecs-9000 user manual step 4 insert sim card and push to lock. Step 5 finish. Step 3 before inserting cfast & sim card, make sure the system power is not plugged..

  • Page 80: 3.8   Installing Ssd/ Hdd

    73 hardware installation 3.8 installing ssd/ hdd step 1 ssd/hdd tray. 3.8.1 ecs-9000-r series step 2 use the trigger and open ssd/hdd tray..

  • Page 81

    74 hardware installation ©vecow ecs-9000 user manual step 3 installing 2.5” ssd/hdd into the tray. Step 4 lock the ssd/hdd tray with key..

  • Page 82

    75 hardware installation 3.8.2 ecs-9000-f/ g/ poe series step 2 install ssd/hdd with hdd bracket. Step 1 remove f-m3 screw..

  • Page 83

    76 hardware installation ©vecow ecs-9000 user manual step 3 lock kh-m3 screw. (one ssd/hdd with four kh-m3 screws) step 4 installing power and sata cable with ssd/hdd..

  • Page 84: 3.9   Installing M2Dom

    77 hardware installation 3.9 installing m2dom step 2 m2dom module. Step 1 m2dom slot..

  • Page 85

    78 hardware installation ©vecow ecs-9000 user manual step 3 install m2dom module with slot. Step 4 lock two m2 screws with slot..

  • Page 86

    79 hardware installation 3.10 mounting your ecs-9000 step 1 ensure the screw holes on the right and left side of the upper case match the ones on ecs-9000 wall mount bracket. 3.10.1 wall mount bracket.

  • Page 87

    80 hardware installation ©vecow ecs-9000 user manual step 2 fasten 4pcs khs#6-32 screws then finish..

  • Page 88

    81 hardware installation 3.10.2 vesa mount step 1 ecs-9000 and vesa mount. Step 2 take ecs-9000 and vesa mount with fasten four khs#6-32 screws.

  • Page 89

    82 hardware installation ©vecow ecs-9000 user manual step 3 fasten four khs#6-32 screws and then finish. Step 4 finish. Step 5 vesa size have 75x75mm(red) and 100x100mm(yellow)..

  • Page 90

    83 hardware installation 3.10.3 din rail kit step 1 ecs-9000 and din rail kit. Step 2 take ecs-9000 and vesa mount with fasten four khs#6-32 screws.

  • Page 91

    84 hardware installation ©vecow ecs-9000 user manual step 3 fasten four khs#6-32 screws and then finish. Step 4 finish. Step 5 ecs-9000 with din rail..

  • Page 92: Bios Setup

    85 bios and driver setting 4 bios setup 4.1 bios settings bios provides an interface for users to check and change system configuration. The bios setup program is accessed by pressing the key when post display output is shown. Figure 4-1: entering setup screen.

  • Page 93: 4.2   Main

    86 bios and driver setting ©vecow ecs-9000 user manual 4.2 main the main menu displays bios version and system information. There are two options on the main menu, system date and system time. System date set the date. Use to switch between date elements. System time set the time. Use to switch betw...

  • Page 94

    87 bios and driver setting 4.3.1 acpi settings enable hibernation enables or disables system's ability to hibernate (os/s4 sleep state). This option may not be effective with some os. Acpi sleep state selects the highest acpi sleep state the system will enter when the suspend button is pressed. S3 v...

  • Page 95

    88 bios and driver setting ©vecow ecs-9000 user manual 4.3.3 pch-fw configuration me unconfig on rtc clear state disabling this option will cause me not to unconfigure on rtc clear. Me state set me to soft temporarily disabled. Figure 4 3-3: pch-fw settings 4.3.4 smart settings smart self test run s...

  • Page 96

    89 bios and driver setting 4.3.7 serial port console redirection console redirection console redirection enable or disable. Console redirection settings these settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the s...

  • Page 97

    90 bios and driver setting ©vecow ecs-9000 user manual hyper-threading enabled for windows xp and linux (os optimized for hyper-threading technology) and disabled for other os (os not optimized for hyper-threading technology). When disabled, only one thread per core is enabled. Active processor core...

  • Page 98

    91 bios and driver setting 4.3.9 intel txt information display intel txt information. Figure 4 3-9: intel txt information 4.3.10 sata configuration figure 4 3-10: sata devices settings cpu c state enable or disable cpu c states. Enhanced c-states enable/disable c1e. When enabled, cpu will switch to ...

  • Page 99

    92 bios and driver setting ©vecow ecs-9000 user manual sata controller(s) enable or disable sata device. Sata mode selection determines how sata controller(s) operate. Software feature mask configuration raid orom/rst driver will refer to the swfm configuration to enable or disable the storage featu...

  • Page 100

    93 bios and driver setting 4.3.12 csm configuration csm support enable/disable csm support gatea20 active upon request - ga20 can be disabled using bios services. Always - do not allow ga20 to be disabled; this option is useful when any rt code is executed above 1mb. Option rom messages set display ...

  • Page 101

    94 bios and driver setting ©vecow ecs-9000 user manual 4.3.13 usb configuration legacy usb support enables legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices available only for efi applications. Xhci hand-off this is a workar...

  • Page 102: 4.4   Chipset

    95 bios and driver setting vt-d vt-d capability. Gmm device (b0:d8:f0) enable/disable sa gmm device. Above 4gb mmio bios assignment enable/disable above 4gb memorymappedio bios assignment. This is disabled automatically when aperture size is set to 2048mb. 4.4.1 system agent (sa) configuration figur...

  • Page 103

    96 bios and driver setting ©vecow ecs-9000 user manual 4.4.2 graphics configuration gtt size select the gtt size. Aperture size select the aperture size. Note: above 4gb mmio bios assignment is automatically enabled when selecting 2048mb aperture. To use this feature, please disable csm support. Dvm...

  • Page 104

    97 bios and driver setting 4.4.4 memory information displays memory information. Figure 4-4-4: memory information 4.4.5 pch-io configuration figure 4-4-5: pch-io settings pch lan controller enable or disable onboard nic. Wake on lan enable or disable integrated lan to wake the system. (the wake on l...

  • Page 105

    98 bios and driver setting ©vecow ecs-9000 user manual 4.4.6 pci express configuration figure 4-4-6: pch-io settings dmi link aspm control enable/disable the control of active state power management on sa side of the dmi link. Native pcie enable pci express native support enable/disable. This featur...

  • Page 106

    99 bios and driver setting 4.4.8 sb porting configuration of pch-io sata raid rom legacy rom: legacy option rom uefi driver: uefi raid driver both: run the legacy option rom and uefi driver. Figure 4-4-8: raid rom settings 4.4.9 gpio manager configuration vga enable enable: vga display output enable...

  • Page 107: 4.5   Security

    100 bios and driver setting ©vecow ecs-9000 user manual set user password set hdd user password. *** advisable to power cycle system after setting hard disk passwords *** discard or save changes option in setup does not have any impact on hdd when password is set or removed. If the 'set hdd user pas...

  • Page 108: 4.6   Boot

    101 bios and driver setting 4.6 boot figure 4-6: bios boot menu setup prompt timeout number of seconds to wait for setup activation key. 65535(0xffff) means indefinite waiting. Bootup numlock state select the keyboard numlock state. Quiet boot enables or disables quiet boot option. Boot option #x se...

  • Page 109: 4.7   Save & Exit

    102 bios and driver setting ©vecow ecs-9000 user manual 4.7 save & exit figure 4-7: bios save and exit menu save changes and exit exit system setup after saving the changes. Discard changes and exit exit system setup without saving any changes. Save changes and reset reset the system after saving th...

  • Page 110: A.1   Io Pin Definition

    103 appendix a a a.1 io pin definition gpio pin base address usage 70 ~ 77 0xa06 do 80 ~ 87 0xa07 di appendix a : isolated dio guide pin no. Definition description pin no. Definition description 1 ext_in0 di0 11 ext_out0 do0 2 ext_in1 di1 12 ext_out1 do1 3 ext_in2 di2 13 ext_out2 do2 4 ext_in3 di3 1...

  • Page 111: A.3   Dio Signal Circuit

    104 ©vecow ecs-9000 user manual appendix a a.3 dio signal circuit di reference circuit: sink mode (npn) v+ v- power supply 6-48v dc di_com (pin 9) di (pin1-8) dio connector source mode (pnp) v+ v- power supply 6-48v dc di_com (pin 9) di (pin1-8) dio connector do reference circuit: v+ io v- device 6-...

  • Page 112: A.5   Driver Install

    105 appendix a a.4 software package contain there are two folders with the following inside: ● driver folder includes x32 & x64 versions ● runtime folder includes dll and header file for software developer or system integration ● sample folder includes sample program a.5 driver install in driver fol...

  • Page 113

    106 ©vecow ecs-9000 user manual appendix a on device manager, “vecow embedded io access” will be added. Please press any key to restart..

  • Page 114: A.6   Dio Demo Tool

    107 appendix a a.6 dio demo tool execute dio demo tool (ecs9k.Exe). Operation on dio demo tool utility. Operation on dio / wdt / poe demo tool utility. Click “read” button to get value; input any number in write and write mask textbox, and click “write” button to set value. On dio panel, check the d...

  • Page 115: B.1   Iomem.Dll Api

    108 ©vecow ecs-9000 user manual appendix b b appendix b : gpio-wdt functions b.1 iomem.Dll api kernel access for gpio, wdt & poe. Int outp(unsigned int port, unsigned char value); description: set byte-data to port. Return: if success return 1; else return 0. Unsigned char inp(unsigned int port); de...

  • Page 116: C.1   Sata Mode For Raid

    109 appendix c c appendix c : raid functions c.1 sata mode for raid please select sata device to raid mode on bios menu. Advanced → sata configuration → sata mode selection c.2 os installation ecs-9000 is featured with seven sata, include two internal sata, two msata, 1 sata dom, 1 m2dom, and 1 cfas...

  • Page 117: Technology” Software

    110 ©vecow ecs-9000 user manual appendix c c.4 install “intel rapid storage technology” software you can get the software on ecs-9000 driver cd. Also, you can find latest information and software directly from intel website. Http://www.Intel.Com/p/en_us/support/highlights/chpsts/imsm the raid enviro...

  • Page 118

    111 appendix c then add “logical device” for windows access. C.7 disk management : partition the disk after raid 1 volume created, you can see the figure of sata device allocation. To start disk management tool, select "initialize disk." you will find “volume_0000” in sata device at bios menu. C.8 i...

  • Page 119: Different

    112 ©vecow ecs-9000 user manual appendix c c.10 recovery and auto re-build when use different raid hdd there is a warning will pop-up to ask you if the disk is not a member of original raid volume. If you press “rebuild”, it will replace the broken sata hdd to the last one sata hdd of raid volume. C...

  • Page 120

    113 appendix d d appendix d : power consumption testing board ecs-9000 ram 16gb x 2 usb-1 usb keyboard logitech k120 usb-2 usb mouse microsoft 1113 usb-3 usb flash transcend 3.0 8gb usb-4 usb flash transcend 3.0 8gb cfast transcend cfx600 sata 0 transcend ssd370 64gb sata 1 toshiba ssd 64gb lan 1 (i...

  • Page 121: D.1   Intel® Core

    114 ©vecow ecs-9000 user manual appendix d d.1 intel® core ™ i7-6700@3.4ghz (8m cache, 4.0 ghz) cpu power input standby mode idle status : cpu usage less 3% max current max consumption max current max consumption core™ i7- 6700 06v 0.984a 05.90w 3.166a 19.00w core™ i7- 6700 09v 0.650a 05.85w 2.391a ...

  • Page 122: D.2   Intel® Core

    115 appendix d d.2 intel® core ™ i5-6500te@2.3ghz (6m cache, 4.0 ghz) cpu power input standby mode idle status : cpu usage less 3% max current max consumption max current max consumption core™ i5- 6500te 06v 1.057a 06.34w 3.497a 20.98w core™ i5- 6500te 09v 0.693a 06.24w 2.263a 20.37w core™ i5- 6500t...

  • Page 123: D.3   Intel® Core

    116 ©vecow ecs-9000 user manual appendix d d.3 intel® core ™ i3-6100@3.7ghz (3m cache, 3.70 ghz) cpu power input standby mode idle status : cpu usage less 3% max current max consumption max current max consumption core™ i3- 6100 06v 1.196a 07.18w 3.504a 21.02w core™ i3- 6100 09v 0.773a 06.96w 2.313a...

  • Page 124: Storage List

    117 appendix e e appendix e : supported memory & storage list testing board ecs-9000 memory test version: 5.1 burnintest v8.1 e.1 supported memory list channel memtest bunin flash bios remove battery *2 pass pass pass pass *1(socket 1) pass pass n/a pass *1(socket 2) pass pass n/a pass e.2 tset item.

  • Page 125: E.3  Non-Ecc

    118 ©vecow ecs-9000 user manual appendix e brand info note & s test temp. (celsius) transcend 8gb 8g 2rx8 ddr4 2400 so ts9cbsese0000 25ºc c96645-0001 25ºc c96645-0002 25ºc 4gb innodisk ddr4 sodimm m4s0-4gssncrg m0s11601080040001 25ºc m0s11601080040002 25ºc 8gb innodisk ddr4 2133 w/t sodimm m4s0-8g...

  • Page 126

    119 appendix e type vendor model capacity msata intel intel-310 ssdmaemc080g2 80gb silicon power sp128gmsa301swo 128gb sata ssd transcend ssd370 ts64gssd370 64gb innodisk 3mg2-p dgs25-64gd81bw1qc 64gb 3mr3-p drs25-64gd70bcaqc 64gb memxpro 3mg2-p dgs25-b56d81bw3qc 128gb sata hdd toshiba mk5055gsx 500...

  • Page 127

    For further support information, please visit www.Vecow.Com this document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or...